rockbox/firmware/target/arm
Rafaël Carré 66f8fb52a9 */app.lds: remove STUBOFFSET
This is related to gdb, and gdb can only work on SH and ifp
This was mistakenly kept when app.lds was forked for each SoC
Side-effect: fix DEBUG builds when the rockbox binary is expected to
be loaded at the start of DRAM and there is no runtime relocation

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28124 a1c6a512-1295-4272-9138-f99709370657
2010-09-20 17:09:55 +00:00
..
archos/av300 Make ATA code not bother to retry requests that return IDNF (specified sector not valid). 2010-04-07 20:01:21 +00:00
as3525 */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
at91sam
imx31 */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
ipod */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
iriver */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
olympus */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
pbell */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
philips */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
pnx0101 Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API. 2010-05-24 16:42:32 +00:00
s3c2440 */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
s5l8700 */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
samsung */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
sandisk */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
tatung */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
tcc77x */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
tcc780x */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
tms320dm320 */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
adc-as3514.c adc-as3514.c: cosmetics 2010-05-15 19:44:54 +00:00
adc-pp5020.c Add initial Packard Bell Vibe 500 port, by Szymon Dziok 2010-01-18 19:05:20 +00:00
ascodec-pp.c
ascodec-target.h as3514/as3543 fixes 2010-05-17 20:53:25 +00:00
ata-as-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
ata-nand-telechips.c
ata-pp5002.c
ata-pp5020.c Enable ATA DMA on pp5020 based players with ATA drives. 2010-01-31 11:07:29 +00:00
ata-sd-pp.c Introduce NORETURN_ATTR wrapper for __attribute__((noreturn)), using this and a bit further cleanup in main gets rid of a warning when compiling for android. 2010-08-12 13:38:25 +00:00
ata-target.h Make ATA code not bother to retry requests that return IDNF (specified sector not valid). 2010-04-07 20:01:21 +00:00
audio-pp.c correction on DEFINE, thanks to Kugel who spotted it ;) 2009-12-01 18:11:06 +00:00
bits-armv4.S Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout. 2010-06-30 02:02:46 +00:00
bits-armv6.S Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout. 2010-06-30 02:02:46 +00:00
crt0-pp-bl.S Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio. 2009-12-25 04:05:01 +00:00
crt0-pp.S ipodvideo: detect ram size at boot (doesn't actually get USED yet) 2010-08-29 13:20:16 +00:00
crt0.S arm/crt0.S: comment why the reset vector doesn't use absolute addressing 2010-06-18 18:31:14 +00:00
ffs-arm.S ARM <= v5: Tiny optimisation exploiting the location of the table. 2009-12-26 13:22:51 +00:00
i2c-pp.c Add initial Packard Bell Vibe 500 port, by Szymon Dziok 2010-01-18 19:05:20 +00:00
i2c-telechips.c Re-write the Telechips I2C delay routine in assembler to stop the compiler optimising it away. Tested with EABI and non-EABI compilers. 2010-06-16 21:03:57 +00:00
i2s-pp.c e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200. 2010-06-26 10:07:17 +00:00
kernel-pp.c
lcd-as-memframe.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
lcd-c200_c200v2.c udelay between command and data write seems to get rid of the display glitches on C200v2 2010-06-27 03:24:56 +00:00
lcd-ssd1815.c
memcpy-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
memmove-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
memset-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
memset16-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
mmu-arm.h Rename cache coherency functions. 2010-09-08 17:05:49 +00:00
mmu-arm.S Rename cache coherency functions. 2010-09-08 17:05:49 +00:00
mmu-armv6.S Fix beast, forgot the asm label when renaming. 2010-09-09 17:00:50 +00:00
pcm-pp.c pcm-pp: revert r26756 2010-06-11 11:25:16 +00:00
pcm-telechips.c Various minor cleanups for cowon d2 2010-08-01 09:33:29 +00:00
powermgmt-ascodec.c as3525v2: fix end of charge detection 2010-05-19 14:06:08 +00:00
sd-pp-target.h
support-arm.S ARM: __div0() takes no argument 2010-06-12 17:15:39 +00:00
system-arm.c Introduce NORETURN_ATTR wrapper for __attribute__((noreturn)), using this and a bit further cleanup in main gets rid of a warning when compiling for android. 2010-08-12 13:38:25 +00:00
system-arm.h Change "r" back to "i" (i is for immediate, so no syntax error) and reclaim a bit binsize. Live with that those function don't build with -O0 since they rely on inlining. 2009-11-15 22:29:22 +00:00
system-pp502x.c Forgot to rename cpucache_flush/_invalidate for PP502x. 2010-09-09 14:35:47 +00:00
system-pp5002.c Rename cache coherency functions. 2010-09-08 17:05:49 +00:00
system-target.h Rename cache coherency functions. 2010-09-08 17:05:49 +00:00
thread-arm.c FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
thread-pp.c For multiprocessor targets, do the thread_exit routine such that we don't need to rely on the compiler's good graces to have stack switching be reliable. Only needs a few asm instructions. 2010-06-18 03:10:18 +00:00
timer-pp.c
usb-drv-arc.c usb_drv_reset() is only used in usb-drv-arc.c 2010-09-16 05:46:24 +00:00
usb-fw-pp502x.c Add initial Packard Bell Vibe 500 port, by Szymon Dziok 2010-01-18 19:05:20 +00:00
usb-fw-pp5002.c
usb-s3c6400x.c usb-s3c6400x.c : don't hardcode USB_NUM_ENDPOINTS but use the define 2010-09-08 03:31:11 +00:00
usb-target.h
usb-tcc.c Various minor cleanups for cowon d2 2010-08-01 09:33:29 +00:00
wmcodec-pp.c FS#11417 by Joe Balough: fix audio/tuner on philips hdd6330 2010-06-19 03:51:57 +00:00
wmcodec-telechips.c