e90006133b
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11806 a1c6a512-1295-4272-9138-f99709370657
96 lines
2.7 KiB
C
96 lines
2.7 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2006 by Barry Wardell
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include "cpu.h"
|
|
#include "system.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include "adc.h"
|
|
|
|
static unsigned short adcdata[NUM_ADC_CHANNELS];
|
|
|
|
/* Scan ADC so that adcdata[channel] gets updated */
|
|
unsigned short adc_scan(int channel)
|
|
{
|
|
unsigned int adc_data_1;
|
|
unsigned int adc_data_2;
|
|
|
|
/* Initialise */
|
|
ADC_ADDR=0x130;
|
|
ADC_STATUS=0; /* 4 bytes, 1 per channel. Each byte is 0 if the channel is
|
|
off, 0x40 if the channel is on */
|
|
|
|
/* Enable Channel */
|
|
ADC_ADDR |= (0x1000000<<channel);
|
|
|
|
/* Start? */
|
|
ADC_ADDR |= 0x20000000;
|
|
ADC_ADDR |= 0x80000000;
|
|
|
|
/* ADC_DATA_1 and ADC_DATA_2 are both four bytes, one byte per channel.
|
|
For each channel, ADC_DATA_1 stores the 8-bit msb, ADC_DATA_2 stores the
|
|
2-bit lsb (in bits 0 and 1). Each channel is 10 bits total. */
|
|
adc_data_1 = ((ADC_DATA_1 >> (8*channel)) & 0xff);
|
|
adc_data_2 = ((ADC_DATA_2 >> (8*channel+6)) & 0x3);
|
|
|
|
adcdata[channel] = (adc_data_1<<2 | adc_data_2);
|
|
|
|
/* FIXME: Hardcode a value for ~82% charge in here until we figure out the
|
|
ADC. This will avoid the low battery warning message. */
|
|
adcdata[ADC_UNREG_POWER] = 0x2C0;
|
|
|
|
return adcdata[channel];
|
|
}
|
|
|
|
/* Read 10-bit channel data */
|
|
unsigned short adc_read(int channel)
|
|
{
|
|
return adcdata[channel];
|
|
}
|
|
|
|
static int adc_counter;
|
|
|
|
static void adc_tick(void)
|
|
{
|
|
if(++adc_counter == HZ)
|
|
{
|
|
adc_counter = 0;
|
|
adc_scan(ADC_0);
|
|
adc_scan(ADC_1);
|
|
adc_scan(ADC_2);
|
|
adc_scan(ADC_3);
|
|
}
|
|
}
|
|
|
|
void adc_init(void)
|
|
{
|
|
/* Enable ADC */
|
|
ADC_ENABLE_ADDR |= ADC_ENABLE;
|
|
|
|
/* Initialise */
|
|
ADC_INIT=0;
|
|
|
|
/* Force a scan of all channels to get initial values */
|
|
adc_scan(ADC_0);
|
|
adc_scan(ADC_1);
|
|
adc_scan(ADC_2);
|
|
adc_scan(ADC_3);
|
|
|
|
tick_add_task(adc_tick);
|
|
}
|