| .. |
|
archos/av300
|
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
|
2007-08-14 22:06:23 +00:00 |
|
imx31
|
Split up app.lds to the respective target directories. The portalplayer devices replicate app.lds since their target tree doesn't follow a syntax typical to the newer arm targets - the portalplayers could be cleaned up further. boot.lds and plugin.lds still need to be cleaned up.
|
2008-03-13 03:48:23 +00:00 |
|
ipod
|
Split up app.lds to the respective target directories. The portalplayer devices replicate app.lds since their target tree doesn't follow a syntax typical to the newer arm targets - the portalplayers could be cleaned up further. boot.lds and plugin.lds still need to be cleaned up.
|
2008-03-13 03:48:23 +00:00 |
|
iriver
|
Split up app.lds to the respective target directories. The portalplayer devices replicate app.lds since their target tree doesn't follow a syntax typical to the newer arm targets - the portalplayers could be cleaned up further. boot.lds and plugin.lds still need to be cleaned up.
|
2008-03-13 03:48:23 +00:00 |
|
olympus
|
m:robe 100 - correct headphone detection
|
2008-03-13 17:27:14 +00:00 |
|
pnx0101
|
Split up app.lds to the respective target directories. The portalplayer devices replicate app.lds since their target tree doesn't follow a syntax typical to the newer arm targets - the portalplayers could be cleaned up further. boot.lds and plugin.lds still need to be cleaned up.
|
2008-03-13 03:48:23 +00:00 |
|
s3c2440
|
Split up app.lds to the respective target directories. The portalplayer devices replicate app.lds since their target tree doesn't follow a syntax typical to the newer arm targets - the portalplayers could be cleaned up further. boot.lds and plugin.lds still need to be cleaned up.
|
2008-03-13 03:48:23 +00:00 |
|
sandisk
|
Split up app.lds to the respective target directories. The portalplayer devices replicate app.lds since their target tree doesn't follow a syntax typical to the newer arm targets - the portalplayers could be cleaned up further. boot.lds and plugin.lds still need to be cleaned up.
|
2008-03-13 03:48:23 +00:00 |
|
tatung/tpj1022
|
Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.
|
2007-11-12 18:49:53 +00:00 |
|
tcc77x
|
Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.
|
2007-11-12 18:49:53 +00:00 |
|
tcc780x
|
Split up app.lds to the respective target directories. The portalplayer devices replicate app.lds since their target tree doesn't follow a syntax typical to the newer arm targets - the portalplayers could be cleaned up further. boot.lds and plugin.lds still need to be cleaned up.
|
2008-03-13 03:48:23 +00:00 |
|
tms320dm320
|
Split up app.lds to the respective target directories. The portalplayer devices replicate app.lds since their target tree doesn't follow a syntax typical to the newer arm targets - the portalplayers could be cleaned up further. boot.lds and plugin.lds still need to be cleaned up.
|
2008-03-13 03:48:23 +00:00 |
|
adc-pp5020.c
|
make mrobe100 work again
|
2008-02-10 16:06:01 +00:00 |
|
ata-as-arm.S
|
Improved CPU clock setup for PP502x. PP5020 and PP5022 are not register compatible here, so define the PP5022 targets properly, and introduce a CPU_PP502x macro for easier family check. Improves stability on PP5020 (less freezing, tested with Mini G1) and reduces clock change penalty (500us on PP5020; uses the relock bit on PP5022).
|
2007-07-02 05:16:40 +00:00 |
|
ata-pp5002.c
|
|
|
|
ata-pp5020.c
|
Restore a line accidentally removed by r15705
|
2007-11-20 07:52:37 +00:00 |
|
ata-target.h
|
PP5002 ATA driver needs to wait for the controller to be ready again before writing the next control register value. Makes check_registers() not fail in the bootloader.
|
2007-08-03 09:34:42 +00:00 |
|
audio-pp.c
|
Hopefully fix line-in recording on PortalPlayer targets (H10 in particular).
|
2007-11-11 23:41:54 +00:00 |
|
crt0-pp-bl.S
|
Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.
|
2007-11-27 01:20:26 +00:00 |
|
crt0-pp.S
|
Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.
|
2007-11-27 01:20:26 +00:00 |
|
i2c-pp.c
|
Do some crackdown on kernel object reinitialization after they could be in use and use before initialization. For c200/e200: Be sure fat cache and ata locks are acquired in the proper order during hot swapping. Delay hotswap monitoring until after initial file mounting (address 2nd kobj concern + possible call of fat driver before init).
|
2008-03-12 10:03:52 +00:00 |
|
i2c-telechips.c
|
Initial Cowon D2 commit:
|
2008-01-14 22:04:48 +00:00 |
|
i2s-pp.c
|
Finish the conversion to packed i2s for PP502x. Karl Kurbjun-approved for Mini-1G. Simplify the pcm format selection #ifdefs.
|
2007-10-16 04:19:18 +00:00 |
|
lcd-as-memframe.S
|
More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds.
|
2007-10-21 23:12:17 +00:00 |
|
memcpy-arm.S
|
|
|
|
memmove-arm.S
|
|
|
|
memset-arm.S
|
|
|
|
memset16-arm.S
|
|
|
|
mmu-arm.c
|
Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe
|
2007-10-23 03:29:15 +00:00 |
|
mmu-arm.h
|
Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe
|
2007-10-23 03:29:15 +00:00 |
|
pcm-pp.c
|
audio on the m:robe 100
|
2008-01-20 12:59:23 +00:00 |
|
system-arm.h
|
Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound.
|
2007-10-06 22:27:27 +00:00 |
|
system-pp502x.c
|
Revert accidental tree commit. Sorry for that.
|
2008-03-08 23:50:55 +00:00 |
|
system-pp5002.c
|
Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.
|
2007-11-27 01:20:26 +00:00 |
|
system-target.h
|
Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.
|
2007-11-27 01:20:26 +00:00 |
|
usb-drv-pp502x.c
|
Only boost the CPU for large transactions. It would be nice to get rid of boosting for USB altogehter, but it doesn't seem to work then.
|
2008-03-13 19:56:52 +00:00 |
|
usb-fw-pp502x.c
|
m:robe 100: add USB detection
|
2008-03-02 13:07:11 +00:00 |
|
usb-fw-pp5002.c
|
FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.
|
2007-09-04 08:03:07 +00:00 |
|
usb-target.h
|
|
|
|
wmcodec-pp.c
|
Do some crackdown on kernel object reinitialization after they could be in use and use before initialization. For c200/e200: Be sure fat cache and ata locks are acquired in the proper order during hot swapping. Delay hotswap monitoring until after initial file mounting (address 2nd kobj concern + possible call of fat driver before init).
|
2008-03-12 10:03:52 +00:00 |
|
wmcodec-telechips.c
|
Initial Cowon D2 commit:
|
2008-01-14 22:04:48 +00:00 |
7fcd26e479