e85bc74b30
The GPIO API was pretty clunky and pin settings were decentralized, making it hard to see what was happening and making GPIO stuff look like a mess, frankly. Instead of passing clunky (port, pin) pairs everywhere, GPIOs are now identified with a single int. The extra overhead should be minimal as GPIO configuration is generally not on a performance-critical path. Pin assignments are now mostly consolidated in gpio-target.h and put in various tables so gpio_init() can assign most pins at boot time. Most drivers no longer need to touch GPIOs and basic pin I/O stuff can happen without config since pins are put into the right state. IRQ pins still need to be configured manually before use. Change-Id: Ic5326284b0b2a2f613e9e76a41cb50e24af3aa47
26 lines
1.6 KiB
C
26 lines
1.6 KiB
C
/* Name Port Pins Function */
|
|
DEFINE_PINGROUP(LCD_DATA, GPIO_A, 0xffff << 0, GPIOF_DEVICE(1))
|
|
DEFINE_PINGROUP(LCD_CONTROL, GPIO_B, 0x1a << 16, GPIOF_DEVICE(1))
|
|
DEFINE_PINGROUP(MSC0, GPIO_A, 0x3f << 20, GPIOF_DEVICE(1))
|
|
DEFINE_PINGROUP(SFC, GPIO_A, 0x3f << 26, GPIOF_DEVICE(1))
|
|
DEFINE_PINGROUP(I2S, GPIO_B, 0x1f << 0, GPIOF_DEVICE(1))
|
|
DEFINE_PINGROUP(DMIC, GPIO_B, 3 << 21, GPIOF_DEVICE(0))
|
|
DEFINE_PINGROUP(I2C0, GPIO_B, 3 << 23, GPIOF_DEVICE(0))
|
|
DEFINE_PINGROUP(I2C1, GPIO_C, 3 << 26, GPIOF_DEVICE(0))
|
|
DEFINE_PINGROUP(I2C2, GPIO_D, 3 << 0, GPIOF_DEVICE(1))
|
|
|
|
/* Name Pin Function */
|
|
DEFINE_GPIO(AK4376_POWER, GPIO_PA(16), GPIOF_OUTPUT(0))
|
|
DEFINE_GPIO(BTN_PLAY, GPIO_PA(17), GPIOF_INPUT)
|
|
DEFINE_GPIO(BTN_VOL_UP, GPIO_PA(19), GPIOF_INPUT)
|
|
DEFINE_GPIO(MSC0_CD, GPIO_PB(6), GPIOF_INPUT)
|
|
DEFINE_GPIO(USB_ID, GPIO_PB(7), GPIOF_INPUT)
|
|
DEFINE_GPIO(AXP_IRQ, GPIO_PB(10), GPIOF_INPUT)
|
|
DEFINE_GPIO(USB_DETECT, GPIO_PB(11), GPIOF_INPUT)
|
|
DEFINE_GPIO(FT6x06_INTERRUPT, GPIO_PB(12), GPIOF_INPUT)
|
|
DEFINE_GPIO(FT6x06_RESET, GPIO_PB(15), GPIOF_OUTPUT(0))
|
|
DEFINE_GPIO(LCD_RD, GPIO_PB(16), GPIOF_OUTPUT(1))
|
|
DEFINE_GPIO(LCD_CE, GPIO_PB(18), GPIOF_OUTPUT(1))
|
|
DEFINE_GPIO(USB_DRVVBUS, GPIO_PB(25), GPIOF_OUTPUT(0))
|
|
DEFINE_GPIO(BTN_VOL_DOWN, GPIO_PB(28), GPIOF_INPUT)
|
|
DEFINE_GPIO(BTN_POWER, GPIO_PB(31), GPIOF_INPUT)
|