94f7d0f290
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17154 a1c6a512-1295-4272-9138-f99709370657
1039 lines
56 KiB
C
Executable file
1039 lines
56 KiB
C
Executable file
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2006 by James Espinoza
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#ifndef __IMX31L_H__
|
|
#define __IMX31L_H__
|
|
|
|
/* Most(if not all) of these defines are copied from Nand-Boot v4 provided w/ the Imx31 Linux Bsp*/
|
|
|
|
#define REG8_PTR_T volatile unsigned char *
|
|
#define REG16_PTR_T volatile unsigned short *
|
|
#define REG32_PTR_T volatile unsigned long *
|
|
|
|
/* Place in the section with the framebuffer */
|
|
#define TTB_BASE_ADDR (0x80100000 + 0x00100000 - TTB_SIZE)
|
|
#define TTB_SIZE (0x4000)
|
|
#define IRAM_SIZE (0x4000)
|
|
#define TTB_BASE ((unsigned int *)TTB_BASE_ADDR)
|
|
#define FRAME ((void*)0x80100000)
|
|
#define FRAME_SIZE (240*320*2)
|
|
|
|
#define DEVBSS_ATTR __attribute__((section(".devbss"),nocommon))
|
|
|
|
/*
|
|
* AIPS 1
|
|
*/
|
|
#define IRAM_BASE_ADDR 0x1fffc000
|
|
#define L2CC_BASE_ADDR 0x30000000
|
|
#define AIPS1_BASE_ADDR 0x43F00000
|
|
#define AIPS1_CTRL_BASE_ADDR AIPS1_BASE_ADDR
|
|
#define MAX_BASE_ADDR 0x43F04000
|
|
#define EVTMON_BASE_ADDR 0x43F08000
|
|
#define CLKCTL_BASE_ADDR 0x43F0C000
|
|
#define ETB_SLOT4_BASE_ADDR 0x43F10000
|
|
#define ETB_SLOT5_BASE_ADDR 0x43F14000
|
|
#define ECT_CTIO_BASE_ADDR 0x43F18000
|
|
#define I2C_BASE_ADDR 0x43F80000
|
|
#define I2C3_BASE_ADDR 0x43F84000
|
|
#define OTG_BASE_ADDR 0x43F88000
|
|
#define ATA_BASE_ADDR 0x43F8C000
|
|
#define UART1_BASE_ADDR 0x43F90000
|
|
#define UART2_BASE_ADDR 0x43F94000
|
|
#define I2C2_BASE_ADDR 0x43F98000
|
|
#define OWIRE_BASE_ADDR 0x43F9C000
|
|
#define SSI1_BASE_ADDR 0x43FA0000
|
|
#define CSPI1_BASE_ADDR 0x43FA4000
|
|
#define KPP_BASE_ADDR 0x43FA8000
|
|
#define IOMUXC_BASE_ADDR 0x43FAC000
|
|
#define UART4_BASE_ADDR 0x43FB0000
|
|
#define UART5_BASE_ADDR 0x43FB4000
|
|
#define ECT_IP1_BASE_ADDR 0x43FB8000
|
|
#define ECT_IP2_BASE_ADDR 0x43FBC000
|
|
|
|
/*
|
|
* SPBA
|
|
*/
|
|
#define SPBA_BASE_ADDR 0x50000000
|
|
#define MMC_SDHC1_BASE_ADDR 0x50004000
|
|
#define MMC_SDHC2_BASE_ADDR 0x50008000
|
|
#define UART3_BASE_ADDR 0x5000C000
|
|
#define CSPI2_BASE_ADDR 0x50010000
|
|
#define SSI2_BASE_ADDR 0x50014000
|
|
#define SIM_BASE_ADDR 0x50018000
|
|
#define IIM_BASE_ADDR 0x5001C000
|
|
#define ATA_DMA_BASE_ADDR 0x50020000
|
|
#define SPBA_CTRL_BASE_ADDR 0x5003C000
|
|
|
|
/*
|
|
* AIPS 2
|
|
*/
|
|
#define AIPS2_BASE_ADDR 0x53F00000
|
|
#define AIPS2_CTRL_BASE_ADDR AIPS2_BASE_ADDR
|
|
#define CCM_BASE_ADDR 0x53F80000
|
|
#define CSPI3_BASE_ADDR 0x53F84000
|
|
#define FIRI_BASE_ADDR 0x53F8C000
|
|
#define GPT1_BASE_ADDR 0x53F90000
|
|
#define EPIT1_BASE_ADDR 0x53F94000
|
|
#define EPIT2_BASE_ADDR 0x53F98000
|
|
#define GPIO3_BASE_ADDR 0x53FA4000
|
|
#define SCC_BASE 0x53FAC000
|
|
#define SCM_BASE 0x53FAE000
|
|
#define SMN_BASE 0x53FAF000
|
|
#define RNGA_BASE_ADDR 0x53FB0000
|
|
#define IPU_CTRL_BASE_ADDR 0x53FC0000
|
|
#define AUDMUX_BASE 0x53FC4000
|
|
#define MPEG4_ENC_BASE 0x53FC8000
|
|
#define GPIO1_BASE_ADDR 0x53FCC000
|
|
#define GPIO2_BASE_ADDR 0x53FD0000
|
|
#define SDMA_BASE_ADDR 0x53FD4000
|
|
#define RTC_BASE_ADDR 0x53FD8000
|
|
#define WDOG_BASE_ADDR 0x53FDC000
|
|
#define PWM_BASE_ADDR 0x53FE0000
|
|
#define RTIC_BASE_ADDR 0x53FEC000
|
|
|
|
#define WDOG1_BASE_ADDR WDOG_BASE_ADDR
|
|
#define CRM_MCU_BASE_ADDR CCM_BASE_ADDR
|
|
|
|
/* IOMUXC */
|
|
#define IOMUXC_(o) (*(REG32_PTR_T)(IOMUXC_BASE_ADDR+(o)))
|
|
|
|
/* GPR */
|
|
#define IOMUXC_GPR IOMUXC_(0x008)
|
|
|
|
/* SW_MUX_CTL */
|
|
#define SW_MUX_CTL_CSPI3_MISO_CSPI3_SCLK_CSPI3_SPI_RDY_TTM_PAD IOMUXC_(0x00C)
|
|
#define SW_MUX_CTL_ATA_RESET_B_CE_CONTROL_CLKSS_CSPI3_MOSI IOMUXC_(0x010)
|
|
#define SW_MUX_CTL_ATA_CS1_ATA_DIOR_ATA_DIOW_ATA_DMACK IOMUXC_(0x014)
|
|
#define SW_MUX_CTL_SD1_DATA1_SD1_DATA2_SD1_DATA3_ATA_CS0 IOMUXC_(0x018)
|
|
#define SW_MUX_CTL_D3_SPL_SD1_CMD_SD1_CLK_SD1_DATA0 IOMUXC_(0x01C)
|
|
#define SW_MUX_CTL_VSYNC3_CONTRAST_D3_REV_D3_CLS IOMUXC_(0x020)
|
|
#define SW_MUX_CTL_SER_RS_PAR_RS_WRITE_READ IOMUXC_(0x024)
|
|
#define SW_MUX_CTL_SD_D_IO_SD_D_CLK_LCS0_LCS1 IOMUXC_(0x028)
|
|
#define SW_MUX_CTL_HSYNC_FPSHIFT_DRDY0_SD_D_I IOMUXC_(0x02C)
|
|
#define SW_MUX_CTL_LD15_LD16_LD17_VSYNC0 IOMUXC_(0x030)
|
|
#define SW_MUX_CTL_LD11_LD12_LD13_LD14 IOMUXC_(0x034)
|
|
#define SW_MUX_CTL_LD7_LD8_LD9_LD10 IOMUXC_(0x038)
|
|
#define SW_MUX_CTL_LD3_LD4_LD5_LD6 IOMUXC_(0x03C)
|
|
#define SW_MUX_CTL_USBH2_DATA1_LD0_LD1_LD2 IOMUXC_(0x040)
|
|
#define SW_MUX_CTL_USBH2_DIR_USBH2_STP_USBH2_NXT_USBH2_DATA0 IOMUXC_(0x044)
|
|
#define SW_MUX_CTL_USBOTG_DATA5_USBOTG_DATA6_USBOTG_DATA7_USBH2_CLK IOMUXC_(0x048)
|
|
#define SW_MUX_CTL_USBOTG_DATA1_USBOTG_DATA2_USBOTG_DATA3_USBOTG_DATA4 IOMUXC_(0x04C)
|
|
#define SW_MUX_CTL_USBOTG_DIR_USBOTG_STP_USBOTG_NXT_USBOTG_DATA0 IOMUXC_(0x050)
|
|
#define SW_MUX_CTL_USB_PWR_USB_OC_USB_BYP_USBOTG_CLK IOMUXC_(0x054)
|
|
#define SW_MUX_CTL_TDO_TRSTB_DE_B_SJC_MOD IOMUXC_(0x058)
|
|
#define SW_MUX_CTL_RTCK_TCK_TMS_TDI IOMUXC_(0x05C)
|
|
#define SW_MUX_CTL_KEY_COL4_KEY_COL5_KEY_COL6_KEY_COL7 IOMUXC_(0x060)
|
|
#define SW_MUX_CTL_KEY_COL0_KEY_COL1_KEY_COL2_KEY_COL3 IOMUXC_(0x064)
|
|
#define SW_MUX_CTL_KEY_ROW4_KEY_ROW5_KEY_ROW6_KEY_ROW7 IOMUXC_(0x068)
|
|
#define SW_MUX_CTL_KEY_ROW0_KEY_ROW1_KEY_ROW2_KEY_ROW3 IOMUXC_(0x06C)
|
|
#define SW_MUX_CTL_TXD2_RTS2_CTS2_BATT_LINE IOMUXC_(0x070)
|
|
#define SW_MUX_CTL_RI_DTE1_DCD_DTE1_DTR_DCE2_RXD2 IOMUXC_(0x074)
|
|
#define SW_MUX_CTL_RI_DCE1_DCD_DCE1_DTR_DTE1_DSR_DTE1 IOMUXC_(0x078)
|
|
#define SW_MUX_CTL_RTS1_CTS1_DTR_DCE1_DSR_DCE1 IOMUXC_(0x07C)
|
|
#define SW_MUX_CTL_CSPI2_SCLK_CSPI2_SPI_RDY_RXD1_TXD1 IOMUXC_(0x080)
|
|
#define SW_MUX_CTL_CSPI2_MISO_CSPI2_SS0_CSPI2_SS1_CSPI2_SS2 IOMUXC_(0x084)
|
|
#define SW_MUX_CTL_CSPI1_SS2_CSPI1_SCLK_CSPI1_SPI_RDY_CSPI2_MOSI IOMUXC_(0x088)
|
|
#define SW_MUX_CTL_CSPI1_MOSI_CSPI1_MISO_CSPI1_SS0_CSPI1_SS1 IOMUXC_(0x08C)
|
|
#define SW_MUX_CTL_STXD6_SRXD6_SCK6_SFS6 IOMUXC_(0x090)
|
|
#define SW_MUX_CTL_STXD5_SRXD5_SCK5_SFS5 IOMUXC_(0x094)
|
|
#define SW_MUX_CTL_STXD4_SRXD4_SCK4_SFS4 IOMUXC_(0x098)
|
|
#define SW_MUX_CTL_STXD3_SRXD3_SCK3_SFS3 IOMUXC_(0x09C)
|
|
#define SW_MUX_CTL_CSI_HSYNC_CSI_PIXCLK_I2C_CLK_I2C_DAT IOMUXC_(0x0A0)
|
|
#define SW_MUX_CTL_CSI_D14_CSI_D15_CSI_MCLK_CSI_VSYNC IOMUXC_(0x0A4)
|
|
#define SW_MUX_CTL_CSI_D10_CSI_D11_CSI_D12_CSI_D13 IOMUXC_(0x0A8)
|
|
#define SW_MUX_CTL_CSI_D6_CSI_D7_CSI_D8_CSI_D9 IOMUXC_(0x0AC)
|
|
#define SW_MUX_CTL_M_REQUEST_M_GRANT_CSI_D4_CSI_D5 IOMUXC_(0x0B0)
|
|
#define SW_MUX_CTL_PC_RST_IOIS16_PC_RW_B_PC_POE IOMUXC_(0x0B4)
|
|
#define SW_MUX_CTL_PC_VS1_PC_VS2_PC_BVD1_PC_BVD2 IOMUXC_(0x0B8)
|
|
#define SW_MUX_CTL_PC_CD2_B_PC_WAIT_B_PC_READY_PC_PWRON IOMUXC_(0x0BC)
|
|
#define SW_MUX_CTL_D2_D1_D0_PC_CD1_B IOMUXC_(0x0C0)
|
|
#define SW_MUX_CTL_D6_D5_D4_D3 IOMUXC_(0x0C4)
|
|
#define SW_MUX_CTL_D10_D9_D8_D7 IOMUXC_(0x0C8)
|
|
#define SW_MUX_CTL_D14_D13_D12_D11 IOMUXC_(0x0CC)
|
|
#define SW_MUX_CTL_NFWP_B_NFCE_B_NFRB_D15 IOMUXC_(0x0D0)
|
|
#define SW_MUX_CTL_NFWE_B_NFRE_B_NFALE_NFCLE IOMUXC_(0x0D4)
|
|
#define SW_MUX_CTL_SDQS0_SDQS1_SDQS2_SDQS3 IOMUXC_(0x0D8)
|
|
#define SW_MUX_CTL_SDCKE0_SDCKE1_SDCLK_SDCLK_B IOMUXC_(0x0DC)
|
|
#define SW_MUX_CTL_RW_RAS_CAS_SDWE IOMUXC_(0x0E0)
|
|
#define SW_MUX_CTL_CS5_ECB_LBA_BCLK IOMUXC_(0x0E4)
|
|
#define SW_MUX_CTL_CS1_CS2_CS3_CS4 IOMUXC_(0x0E8)
|
|
#define SW_MUX_CTL_EB0_EB1_OE_CS0 IOMUXC_(0x0EC)
|
|
#define SW_MUX_CTL_DQM0_DQM1_DQM2_DQM3 IOMUXC_(0x0F0)
|
|
#define SW_MUX_CTL_SD28_SD29_SD30_SD31 IOMUXC_(0x0F4)
|
|
#define SW_MUX_CTL_SD24_SD25_SD26_SD27 IOMUXC_(0x0F8)
|
|
#define SW_MUX_CTL_SD20_SD21_SD22_SD23 IOMUXC_(0x0FC)
|
|
#define SW_MUX_CTL_SD16_SD17_SD18_SD19 IOMUXC_(0x100)
|
|
#define SW_MUX_CTL_SD12_SD13_SD14_SD15 IOMUXC_(0x104)
|
|
#define SW_MUX_CTL_SD8_SD9_SD10_SD11 IOMUXC_(0x108)
|
|
#define SW_MUX_CTL_SD4_SD5_SD6_SD7 IOMUXC_(0x10C)
|
|
#define SW_MUX_CTL_SD0_SD1_SD2_SD3 IOMUXC_(0x110)
|
|
#define SW_MUX_CTL_A24_A25_SDBA1_SDBA0 IOMUXC_(0x114)
|
|
#define SW_MUX_CTL_A20_A21_A22_A23 IOMUXC_(0x118)
|
|
#define SW_MUX_CTL_A16_A17_A18_A19 IOMUXC_(0x11C)
|
|
#define SW_MUX_CTL_A12_A13_A14_A15 IOMUXC_(0x120)
|
|
#define SW_MUX_CTL_A9_A10_MA10_A11 IOMUXC_(0x124)
|
|
#define SW_MUX_CTL_A5_A6_A7_A8 IOMUXC_(0x128)
|
|
#define SW_MUX_CTL_A1_A2_A3_A4 IOMUXC_(0x12C)
|
|
#define SW_MUX_CTL_DVFS1_VPG0_VPG1_A0 IOMUXC_(0x130)
|
|
#define SW_MUX_CTL_CKIL_POWER_FAIL_VSTBY_DVFS0 IOMUXC_(0x134)
|
|
#define SW_MUX_CTL_BOOT_MODE1_BOOT_MODE2_BOOT_MODE3_BOOT_MODE4 IOMUXC_(0x138)
|
|
#define SW_MUX_CTL_RESET_IN_B_POR_B_CLKO_BOOT_MODE0 IOMUXC_(0x13C)
|
|
#define SW_MUX_CTL_STX0_SRX0_SIMPD0_CKIH IOMUXC_(0x140)
|
|
#define SW_MUX_CTL_GPIO3_1_SCLK0_SRST0_SVEN0 IOMUXC_(0x144)
|
|
#define SW_MUX_CTL_GPIO1_4_GPIO1_5_GPIO1_6_GPIO3_0 IOMUXC_(0x148)
|
|
#define SW_MUX_CTL_GPIO1_0_GPIO1_1_GPIO1_2_GPIO1_3 IOMUXC_(0x14C)
|
|
#define SW_MUX_CTL_CAPTURE_COMPARE_WATCHDOG_RST_PWMO IOMUXC_(0x150)
|
|
|
|
#define SW_MUX_OUT_EN_GPIO_DR 0x0
|
|
#define SW_MUX_OUT_FUNCTIONAL 0x1
|
|
#define SW_MUX_OUT_ALTERNATE_1 0x2
|
|
#define SW_MUX_OUT_ALTERNATE_2 0x3
|
|
#define SW_MUX_OUT_ALTERNATE_3 0x4
|
|
#define SW_MUX_OUT_ALTERNATE_4 0x5
|
|
#define SW_MUX_OUT_ALTERNATE_5 0x6
|
|
#define SW_MUX_OUT_ALTERNATE_6 0x7
|
|
|
|
#define SW_MUX_IN_NO_INPUTS 0x0
|
|
#define SW_MUX_IN_GPIO_PSR_ISR 0x1
|
|
#define SW_MUX_IN_FUNCTIONAL 0x2
|
|
#define SW_MUX_IN_ALTERNATE_1 0x3
|
|
#define SW_MUX_IN_ALTERNATE_2 0x4
|
|
|
|
/* Shift above flags into one of the four fields in each register */
|
|
#define SW_MUX_CTL_FLD_0(x) ((x) << 0)
|
|
#define SW_MUX_CTL_FLD_1(x) ((x) << 8)
|
|
#define SW_MUX_CTL_FLD_2(x) ((x) << 16)
|
|
#define SW_MUX_CTL_FLD_3(x) ((x) << 24)
|
|
|
|
/* SW_PAD_CTL */
|
|
#define SW_PAD_CTL_TTM_PAD__X__X IOMUXC_(0x154)
|
|
#define SW_PAD_CTL_CSPI3_MISO_CSPI3_SCLK_CSPI3_SPI_RDY IOMUXC_(0x158)
|
|
#define SW_PAD_CTL_CE_CONTROL_CLKSS_CSPI3_MOSI IOMUXC_(0x15C)
|
|
#define SW_PAD_CTL_ATA_DIOW_ATA_DMACK_ATA_RESET_B IOMUXC_(0x160)
|
|
#define SW_PAD_CTL_ATA_CS0_ATA_CS1_ATA_DIOR IOMUXC_(0x164)
|
|
#define SW_PAD_CTL_SD1_DATA1_SD1_DATA2_SD1_DATA3 IOMUXC_(0x168)
|
|
#define SW_PAD_CTL_SD1_CMD_SD1_CLK_SD1_DATA0 IOMUXC_(0x16C)
|
|
#define SW_PAD_CTL_D3_REV_D3_CLS_D3_SPL IOMUXC_(0x170)
|
|
#define SW_PAD_CTL_READ_VSYNC3_CONTRAST IOMUXC_(0x174)
|
|
#define SW_PAD_CTL_SER_RS_PAR_RS_WRITE IOMUXC_(0x178)
|
|
#define SW_PAD_CTL_SD_D_CLK_LCS0_LCS1 IOMUXC_(0x17C)
|
|
#define SW_PAD_CTL_DRDY0_SD_D_I_SD_D_IO IOMUXC_(0x180)
|
|
#define SW_PAD_CTL_VSYNC0_HSYNC_FPSHIFT IOMUXC_(0x184)
|
|
#define SW_PAD_CTL_LD15_LD16_LD17 IOMUXC_(0x188)
|
|
#define SW_PAD_CTL_LD12_LD13_LD14 IOMUXC_(0x18C)
|
|
#define SW_PAD_CTL_LD9_LD10_LD11 IOMUXC_(0x190)
|
|
#define SW_PAD_CTL_LD6_LD7_LD8 IOMUXC_(0x194)
|
|
#define SW_PAD_CTL_LD3_LD4_LD5 IOMUXC_(0x198)
|
|
#define SW_PAD_CTL_LD0_LD1_LD2 IOMUXC_(0x19C)
|
|
#define SW_PAD_CTL_USBH2_NXT_USBH2_DATA0_USBH2_DATA1 IOMUXC_(0x1A0)
|
|
#define SW_PAD_CTL_USBH2_CLK_USBH2_DIR_USBH2_STP IOMUXC_(0x1A4)
|
|
#define SW_PAD_CTL_USBOTG_DATA5_USBOTG_DATA6_USBOTG_DATA7 IOMUXC_(0x1A8)
|
|
#define SW_PAD_CTL_USBOTG_DATA2_USBOTG_DATA3_USBOTG_DATA4 IOMUXC_(0x1AC)
|
|
#define SW_PAD_CTL_USBOTG_NXT_USBOTG_DATA0_USBOTG_DATA1 IOMUXC_(0x1B0)
|
|
#define SW_PAD_CTL_USBOTG_CLK_USBOTG_DIR_USBOTG_STP IOMUXC_(0x1B4)
|
|
#define SW_PAD_CTL_USB_PWR_USB_OC_USB_BYP IOMUXC_(0x1B8)
|
|
#define SW_PAD_CTL_TRSTB_DE_B_SJC_MOD IOMUXC_(0x1BC)
|
|
#define SW_PAD_CTL_TMS_TDI_TDO IOMUXC_(0x1C0)
|
|
#define SW_PAD_CTL_KEY_COL7_RTCK_TCK IOMUXC_(0x1C4)
|
|
#define SW_PAD_CTL_KEY_COL4_KEY_COL5_KEY_COL6 IOMUXC_(0x1C8)
|
|
#define SW_PAD_CTL_KEY_COL1_KEY_COL2_KEY_COL3 IOMUXC_(0x1CC)
|
|
#define SW_PAD_CTL_KEY_ROW6_KEY_ROW7_KEY_COL0 IOMUXC_(0x1D0)
|
|
#define SW_PAD_CTL_KEY_ROW3_KEY_ROW4_KEY_ROW5 IOMUXC_(0x1D4)
|
|
#define SW_PAD_CTL_KEY_ROW0_KEY_ROW1_KEY_ROW2 IOMUXC_(0x1D8)
|
|
#define SW_PAD_CTL_RTS2_CTS2_BATT_LINE IOMUXC_(0x1DC)
|
|
#define SW_PAD_CTL_DTR_DCE2_RXD2_TXD2 IOMUXC_(0x1E0)
|
|
#define SW_PAD_CTL_DSR_DTE1_RI_DTE1_DCD_DTE1 IOMUXC_(0x1E4)
|
|
#define SW_PAD_CTL_RI_DCE1_DCD_DCE1_DTR_DTE1 IOMUXC_(0x1E8)
|
|
#define SW_PAD_CTL_CTS1_DTR_DCE1_DSR_DCE1 IOMUXC_(0x1EC)
|
|
#define SW_PAD_CTL_RXD1_TXD1_RTS1 IOMUXC_(0x1F0)
|
|
#define SW_PAD_CTL_CSPI2_SS2_CSPI2_SCLK_CSPI2_SPI_RDY IOMUXC_(0x1F4)
|
|
#define SW_PAD_CTL_CSPI2_MISO_CSPI2_SS0_CSPI2_SS1 IOMUXC_(0x1F8)
|
|
#define SW_PAD_CTL_CSPI1_SCLK_CSPI1_SPI_RDY_CSPI2_MOSI IOMUXC_(0x1FC)
|
|
#define SW_PAD_CTL_CSPI1_SS0_CSPI1_SS1_CSPI1_SS IOMUXC_(0x200)
|
|
#define SW_PAD_CTL_SFS6_CSPI1_MOSI_CSPI1_MISO IOMUXC_(0x204)
|
|
#define SW_PAD_CTL_STXD6_SRXD6_SCK6 IOMUXC_(0x208)
|
|
#define SW_PAD_CTL_SRXD5_SCK5_SFS5 IOMUXC_(0x20C)
|
|
#define SW_PAD_CTL_SCK4_SFS4_STXD5 IOMUXC_(0x210)
|
|
#define SW_PAD_CTL_SFS3_STXD4_SRXD4 IOMUXC_(0x214)
|
|
#define SW_PAD_CTL_STXD3_SRXD3_SCK3 IOMUXC_(0x218)
|
|
#define SW_PAD_CTL_CSI_PIXCLK_I2C_CLK_I2C_DAT IOMUXC_(0x21C)
|
|
#define SW_PAD_CTL_CSI_MCLK_CSI_VSYNC_CSI_HSYNC IOMUXC_(0x220)
|
|
#define SW_PAD_CTL_CSI_D13_CSI_D14_CSI_D15 IOMUXC_(0x224)
|
|
#define SW_PAD_CTL_CSI_D10_CSI_D11_CSI_D12 IOMUXC_(0x228)
|
|
#define SW_PAD_CTL_CSI_D7_CSI_D8_CSI_D9 IOMUXC_(0x22C)
|
|
#define SW_PAD_CTL_CSI_D4_CSI_D5_CSI_D6 IOMUXC_(0x230)
|
|
#define SW_PAD_CTL_PC_POE_M_REQUEST_M_GRANT IOMUXC_(0x234)
|
|
#define SW_PAD_CTL_PC_RST_IOIS16_PC_RW_B IOMUXC_(0x238)
|
|
#define SW_PAD_CTL_PC_VS2_PC_BVD1_PC_BVD2 IOMUXC_(0x23C)
|
|
#define SW_PAD_CTL_PC_READY_PC_PWRON_PC_VS1 IOMUXC_(0x240)
|
|
#define SW_PAD_CTL_PC_CD1_B_PC_CD2_B_PC_WAIT_B IOMUXC_(0x244)
|
|
#define SW_PAD_CTL_D2_D1_D0 IOMUXC_(0x248)
|
|
#define SW_PAD_CTL_D5_D4_D3 IOMUXC_(0x24C)
|
|
#define SW_PAD_CTL_D8_D7_D6 IOMUXC_(0x250)
|
|
#define SW_PAD_CTL_D11_D10_D9 IOMUXC_(0x254)
|
|
#define SW_PAD_CTL_D14_D13_D12 IOMUXC_(0x258)
|
|
#define SW_PAD_CTL_NFCE_B_NFRB_D15 IOMUXC_(0x25C)
|
|
#define SW_PAD_CTL_NFALE_NFCLE_NFWP_B IOMUXC_(0x260)
|
|
#define SW_PAD_CTL_SDQS3_NFWE_B_NFRE_B IOMUXC_(0x264)
|
|
#define SW_PAD_CTL_SDQS0_SDQS1_SDQS2 IOMUXC_(0x268)
|
|
#define SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B IOMUXC_(0x26C)
|
|
#define SW_PAD_CTL_CAS_SDWE_SDCKE0 IOMUXC_(0x270)
|
|
#define SW_PAD_CTL_BCLK_RW_RAS IOMUXC_(0x274)
|
|
#define SW_PAD_CTL_CS5_ECB_LBA IOMUXC_(0x278)
|
|
#define SW_PAD_CTL_CS2_CS3_CS4 IOMUXC_(0x27C)
|
|
#define SW_PAD_CTL_OE_CS0_CS1 IOMUXC_(0x280)
|
|
#define SW_PAD_CTL_DQM3_EB0_EB1 IOMUXC_(0x284)
|
|
#define SW_PAD_CTL_DQM0_DQM1_DQM2 IOMUXC_(0x288)
|
|
#define SW_PAD_CTL_SD29_SD30_SD31 IOMUXC_(0x28C)
|
|
#define SW_PAD_CTL_SD26_SD27_SD28 IOMUXC_(0x290)
|
|
#define SW_PAD_CTL_SD23_SD24_SD25 IOMUXC_(0x294)
|
|
#define SW_PAD_CTL_SD20_SD21_SD22 IOMUXC_(0x298)
|
|
#define SW_PAD_CTL_SD17_SD18_SD19 IOMUXC_(0x29C)
|
|
#define SW_PAD_CTL_SD14_SD15_SD16 IOMUXC_(0x2A0)
|
|
#define SW_PAD_CTL_SD11_SD12_SD13 IOMUXC_(0x2A4)
|
|
#define SW_PAD_CTL_SD8_SD9_SD10 IOMUXC_(0x2A8)
|
|
#define SW_PAD_CTL_SD5_SD6_SD7 IOMUXC_(0x2AC)
|
|
#define SW_PAD_CTL_SD2_SD3_SD4 IOMUXC_(0x2B0)
|
|
#define SW_PAD_CTL_SDBA0_SD0_SD1 IOMUXC_(0x2B4)
|
|
#define SW_PAD_CTL_A24_A25_SDBA1 IOMUXC_(0x2B8)
|
|
#define SW_PAD_CTL_A21_A22_A23 IOMUXC_(0x2BC)
|
|
#define SW_PAD_CTL_A18_A19_A20 IOMUXC_(0x2C0)
|
|
#define SW_PAD_CTL_A15_A16_A17 IOMUXC_(0x2C4)
|
|
#define SW_PAD_CTL_A12_A13_A14 IOMUXC_(0x2C8)
|
|
#define SW_PAD_CTL_A10_MA10_A11 IOMUXC_(0x2CC)
|
|
#define SW_PAD_CTL_A7_A8_A9 IOMUXC_(0x2D0)
|
|
#define SW_PAD_CTL_A4_A5_A6 IOMUXC_(0x2D4)
|
|
#define SW_PAD_CTL_A1_A2_A3 IOMUXC_(0x2D8)
|
|
#define SW_PAD_CTL_VPG0_VPG1_A0 IOMUXC_(0x2DC)
|
|
#define SW_PAD_CTL_VSTBY_DVFS0_DVFS1 IOMUXC_(0x2E0)
|
|
#define SW_PAD_CTL_BOOT_MODE4_CKIL_POWER_FAIL IOMUXC_(0x2E4)
|
|
#define SW_PAD_CTL_BOOT_MODE1_BOOT_MODE2_BOOT_MODE3 IOMUXC_(0x2E8)
|
|
#define SW_PAD_CTL_POR_B_CLKO_BOOT_MODE0 IOMUXC_(0x2EC)
|
|
#define SW_PAD_CTL_SIMPD0_CKIH_RESET_IN_B IOMUXC_(0x2F0)
|
|
#define SW_PAD_CTL_SVEN0_STX0_SRX0 IOMUXC_(0x2F4)
|
|
#define SW_PAD_CTL_GPIO3_1_SCLK0_SRST0 IOMUXC_(0x2F8)
|
|
#define SW_PAD_CTL_GPIO1_5_GPIO1_6_GPIO3_0 IOMUXC_(0x2FC)
|
|
#define SW_PAD_CTL_GPIO1_2_GPIO1_3_GPIO1_4 IOMUXC_(0x300)
|
|
#define SW_PAD_CTL_PWMO_GPIO1_0_GPIO1_1 IOMUXC_(0x304)
|
|
#define SW_PAD_CTL_CAPTURE_COMPARE_WATCHDOG_RST IOMUXC_(0x308)
|
|
|
|
/* SW_PAD_CTL flags */
|
|
#define SW_PAD_CTL_LOOPBACK (1 << 9)
|
|
#define SW_PAD_CTL_DISABLE_PULL_UP_DOWN_AND_KEEPER (0 << 7)
|
|
#if 0 /* Same as 0 */
|
|
#define SW_PAD_CTL_DISABLE_PULL_UP_DOWN_AND_KEEPER (1 << 7)
|
|
#endif
|
|
#define SW_PAD_CTL_ENABLE_KEEPER (2 << 7)
|
|
#define SW_PAD_CTL_ENABLE_PULL_UP_OR_PULL_DOWN (3 << 7)
|
|
#define SW_PAD_CTL_100K_PULL_DOWN (0 << 5)
|
|
#define SW_PAD_CTL_100K_PULL_UP (1 << 5)
|
|
#if 0 /* Completeness */
|
|
#define SW_PAD_CTL_47K_PULL_UP (2 << 5) /* Not in IMX31/L */
|
|
#define SW_PAD_CTL_22K_PULL_UP (3 << 5) /* Not in IMX31/L */
|
|
#endif
|
|
#define SW_PAD_CTL_IPP_HYS_STD (0 << 4)
|
|
#define SW_PAD_CTL_IPP_HYS_SCHIMDT (1 << 4)
|
|
#define SW_PAD_CTL_IPP_ODE_CMOS (0 << 3)
|
|
#define SW_PAD_CTL_IPP_ODE_OPEN (1 << 3)
|
|
#define SW_PAD_CTL_IPP_DSE_STD (0 << 1)
|
|
#define SW_PAD_CTL_IPP_DSE_HIGH (1 << 1)
|
|
#define SW_PAD_CTL_IPP_DSE_MAX (2 << 1)
|
|
#if 0 /* Same as 2 */
|
|
#define SW_PAD_CTL_IPP_DSE_MAX (3 << 1)
|
|
#endif
|
|
#define SW_PAD_CTL_IPP_SRE_SLOW (0 << 0)
|
|
#define SW_PAD_CTL_IPP_SRE_FAST (1 << 0)
|
|
|
|
/* Shift above flags into one of the three fields in each register */
|
|
#define SW_PAD_CTL_FLD_0(x) ((x) << 0)
|
|
#define SW_PAD_CTL_FLD_1(x) ((x) << 10)
|
|
#define SW_PAD_CTL_FLD_2(x) ((x) << 20)
|
|
|
|
/* IPU */
|
|
#define IPU_CONF (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x00))
|
|
#define IPU_CHA_BUF0_RDY (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x04))
|
|
#define IPU_CHA_BUF1_RDY (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x08))
|
|
#define IPU_CHA_DB_MODE_SEL (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x0C))
|
|
#define IPU_CHA_CUR_BUF (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x10))
|
|
#define IPU_FS_PROC_FLOW (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x14))
|
|
#define IPU_FS_DISP_FLOW (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x18))
|
|
#define IPU_TASKS_STAT (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x1C))
|
|
#define IPU_IMA_ADDR (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x20))
|
|
#define IPU_IMA_DATA (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x24))
|
|
#define IPU_INT_CTRL_1 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x28))
|
|
#define IPU_INT_CTRL_2 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x2C))
|
|
#define IPU_INT_CTRL_3 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x30))
|
|
#define IPU_INT_CTRL_4 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x34))
|
|
#define IPU_INT_CTRL_5 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x38))
|
|
#define IPU_INT_STAT_1 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x3C))
|
|
#define IPU_INT_STAT_2 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x40))
|
|
#define IPU_INT_STAT_3 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x44))
|
|
#define IPU_INT_STAT_4 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x48))
|
|
#define IPU_INT_STAT_5 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x4C))
|
|
#define IPU_BRK_CTRL_1 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x50))
|
|
#define IPU_BRK_CTRL_2 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x54))
|
|
#define IPU_BRK_STAT (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x58))
|
|
#define IPU_DIAGB_CTRL (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x60))
|
|
|
|
|
|
/* ATA */
|
|
#define ATA_TIME_OFF (*(REG8_PTR_T)(ATA_BASE_ADDR+0x00))
|
|
#define ATA_TIME_ON (*(REG8_PTR_T)(ATA_BASE_ADDR+0x01))
|
|
#define ATA_TIME_1 (*(REG8_PTR_T)(ATA_BASE_ADDR+0x02))
|
|
#define ATA_TIME_2W (*(REG8_PTR_T)(ATA_BASE_ADDR+0x03))
|
|
/* PIO */
|
|
#define ATA_TIME_2R (*(REG8_PTR_T)(ATA_BASE_ADDR+0x04))
|
|
#define ATA_TIME_AX (*(REG8_PTR_T)(ATA_BASE_ADDR+0x05))
|
|
#define ATA_TIME_4 (*(REG8_PTR_T)(ATA_BASE_ADDR+0x07))
|
|
#define ATA_TIME_9 (*(REG8_PTR_T)(ATA_BASE_ADDR+0x08))
|
|
/* MDMA */
|
|
#define ATA_TIME_M (*(REG8_PTR_T)(ATA_BASE_ADDR+0x09))
|
|
#define ATA_TIME_JN (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0A))
|
|
#define ATA_TIME_D (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0B))
|
|
#define ATA_TIME_K (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0C))
|
|
/* UDMA */
|
|
#define ATA_TIME_ACK (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0D))
|
|
#define ATA_TIME_ENV (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0E))
|
|
#define ATA_TIME_PIO_RDX (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0F))
|
|
#define ATA_TIME_ZAH (*(REG8_PTR_T)(ATA_BASE_ADDR+0x10))
|
|
#define ATA_TIME_MLIX (*(REG8_PTR_T)(ATA_BASE_ADDR+0x11))
|
|
#define ATA_TIME_DVH (*(REG8_PTR_T)(ATA_BASE_ADDR+0x12))
|
|
#define ATA_TIME_DZFS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x13))
|
|
#define ATA_TIME_DVS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x14))
|
|
#define ATA_TIME_CVS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x15))
|
|
#define ATA_TIME_SS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x16))
|
|
#define ATA_TIME_CYC (*(REG8_PTR_T)(ATA_BASE_ADDR+0x17))
|
|
/* */
|
|
#define ATA_FIFO_DATA_32 (*(REG32_PTR_T)(ATA_BASE_ADDR+0x18))
|
|
#define ATA_FIFO_DATA_16 (*(REG16_PTR_T)(ATA_BASE_ADDR+0x1c))
|
|
#define ATA_FIFO_FILL (*(REG8_PTR_T)(ATA_BASE_ADDR+0x20))
|
|
/* Actually ATA_CONTROL but conflicts arise */
|
|
#define ATA_INTF_CONTROL (*(REG8_PTR_T)(ATA_BASE_ADDR+0x24))
|
|
#define ATA_INTERRUPT_PENDING (*(REG8_PTR_T)(ATA_BASE_ADDR+0x28))
|
|
#define ATA_INTERRUPT_ENABLE (*(REG8_PTR_T)(ATA_BASE_ADDR+0x2c))
|
|
#define ATA_INTERRUPT_CLEAR (*(REG8_PTR_T)(ATA_BASE_ADDR+0x30))
|
|
#define ATA_FIFO_ALARM (*(REG8_PTR_T)(ATA_BASE_ADDR+0x34))
|
|
#define ATA_DRIVE_DATA (*(REG16_PTR_T)(ATA_BASE_ADDR+0xA0))
|
|
#define ATA_DRIVE_FEATURES (*(REG8_PTR_T)(ATA_BASE_ADDR+0xA4))
|
|
#define ATA_DRIVE_SECTOR_COUNT (*(REG8_PTR_T)(ATA_BASE_ADDR+0xA8))
|
|
#define ATA_DRIVE_SECTOR_NUM (*(REG8_PTR_T)(ATA_BASE_ADDR+0xAC))
|
|
#define ATA_DRIVE_CYL_LOW (*(REG8_PTR_T)(ATA_BASE_ADDR+0xB0))
|
|
#define ATA_DRIVE_CYL_HIGH (*(REG8_PTR_T)(ATA_BASE_ADDR+0xB4))
|
|
#define ATA_DRIVE_CYL_HEAD (*(REG8_PTR_T)(ATA_BASE_ADDR+0xB8))
|
|
#define ATA_DRIVE_STATUS (*(REG8_PTR_T)(ATA_BASE_ADDR+0xBC)) /* rd */
|
|
#define ATA_DRIVE_COMMAND (*(REG8_PTR_T)(ATA_BASE_ADDR+0xBC)) /* wr */
|
|
#define ATA_ALT_DRIVE_STATUS (*(REG8_PTR_T)(ATA_BASE_ADDR+0xD8)) /* rd */
|
|
#define ATA_DRIVE_CONTROL (*(REG8_PTR_T)(ATA_BASE_ADDR+0xD8)) /* wr */
|
|
|
|
/* ATA_INTF_CONTROL flags */
|
|
#define ATA_FIFO_RST (1 << 7)
|
|
#define ATA_ATA_RST (1 << 6)
|
|
#define ATA_FIFO_TX_EN (1 << 5)
|
|
#define ATA_FIFO_RCV_EN (1 << 4)
|
|
#define ATA_DMA_PENDING (1 << 3)
|
|
#define ATA_DMA_ULTRA_SELECTED (1 << 2)
|
|
#define ATA_DMA_WRITE (1 << 1)
|
|
#define ATA_IORDY_EN (1 << 0)
|
|
|
|
/* ATA_INTERRUPT_PENDING, ATA_INTERRUPT_ENABLE, ATA_INTERRUPT_CLEAR flags */
|
|
#define ATA_INTRQ1 (1 << 7)
|
|
#define ATA_FIFO_UNDERFLOW (1 << 6)
|
|
#define ATA_FIFO_OVERFLOW (1 << 5)
|
|
#define ATA_CONTROLLER_IDLE (1 << 4)
|
|
#define ATA_INTRQ2 (1 << 3)
|
|
|
|
/* EPIT */
|
|
#define EPITCR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x00))
|
|
#define EPITSR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x04))
|
|
#define EPITLR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x08))
|
|
#define EPITCMPR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x0C))
|
|
#define EPITCNT1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x10))
|
|
|
|
#define EPITCR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x00))
|
|
#define EPITSR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x04))
|
|
#define EPITLR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x08))
|
|
#define EPITCMPR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x0C))
|
|
#define EPITCNT2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x10))
|
|
|
|
#define EPITCR_CLKSRC_OFF (0 << 24)
|
|
#define EPITCR_CLKSRC_IPG_CLK (1 << 24)
|
|
#define EPITCR_CLKSRC_IPG_CLK_HIGHFREQ (2 << 24)
|
|
#define EPITCR_CLKSRC_IPG_CLK_32K (3 << 24)
|
|
#define EPITCR_OM_DISCONNECTED (0 << 22)
|
|
#define EPITCR_OM_TOGGLE (1 << 22)
|
|
#define EPITCR_OM_CLEAR (2 << 22)
|
|
#define EPITCR_OM_SET (3 << 22)
|
|
#define EPITCR_STOPEN (1 << 21)
|
|
#define EPITCR_DOZEN (1 << 20)
|
|
#define EPITCR_WAITEN (1 << 19)
|
|
#define EPITCR_DBGEN (1 << 18)
|
|
#define EPITCR_IOVW (1 << 17)
|
|
#define EPITCR_SWR (1 << 16)
|
|
#define EPITCR_PRESCALER(n) ((n) << 4) /* Divide by n+1 */
|
|
#define EPITCR_RLD (1 << 3)
|
|
#define EPITCR_OCIEN (1 << 2)
|
|
#define EPITCR_ENMOD (1 << 1)
|
|
#define EPITCR_EN (1 << 0)
|
|
|
|
#define EPITSR_OCIF (1 << 0)
|
|
|
|
/* GPIO */
|
|
#define GPIO_DR_I 0x00 /* Offset - 0x00 */
|
|
#define GPIO_GDIR_I 0x01 /* Offset - 0x04 */
|
|
#define GPIO_PSR_I 0x02 /* Offset - 0x08 */
|
|
#define GPIO_ICR1_I 0x03 /* Offset - 0x0C */
|
|
#define GPIO_ICR2_I 0x04 /* Offset - 0x10 */
|
|
#define GPIO_IMR_I 0x05 /* Offset - 0x14 */
|
|
#define GPIO_ISR_I 0x06 /* Offset - 0x18 */
|
|
|
|
#define GPIO1_DR (((REG32_PTR_T)GPIO1_BASE_ADDR)[GPIO_DR_I])
|
|
#define GPIO1_GDIR (((REG32_PTR_T)GPIO1_BASE_ADDR)[GPIO_GDIR_I])
|
|
#define GPIO1_PSR (((REG32_PTR_T)GPIO1_BASE_ADDR)[GPIO_PSR_I])
|
|
#define GPIO1_ICR1 (((REG32_PTR_T)GPIO1_BASE_ADDR)[GPIO_ICR1_I])
|
|
#define GPIO1_ICR2 (((REG32_PTR_T)GPIO1_BASE_ADDR)[GPIO_ICR2_I])
|
|
#define GPIO1_IMR (((REG32_PTR_T)GPIO1_BASE_ADDR)[GPIO_IMR_I])
|
|
#define GPIO1_ISR (((REG32_PTR_T)GPIO1_BASE_ADDR)[GPIO_ISR_I])
|
|
|
|
#define GPIO2_DR (((REG32_PTR_T)GPIO2_BASE_ADDR)[GPIO_DR_I])
|
|
#define GPIO2_GDIR (((REG32_PTR_T)GPIO2_BASE_ADDR)[GPIO_GDIR_I])
|
|
#define GPIO2_PSR (((REG32_PTR_T)GPIO2_BASE_ADDR)[GPIO_PSR_I])
|
|
#define GPIO2_ICR1 (((REG32_PTR_T)GPIO2_BASE_ADDR)[GPIO_ICR1_I])
|
|
#define GPIO2_ICR2 (((REG32_PTR_T)GPIO2_BASE_ADDR)[GPIO_ICR2_I])
|
|
#define GPIO2_IMR (((REG32_PTR_T)GPIO2_BASE_ADDR)[GPIO_IMR_I])
|
|
#define GPIO2_ISR (((REG32_PTR_T)GPIO2_BASE_ADDR)[GPIO_ISR_I])
|
|
|
|
#define GPIO3_DR (((REG32_PTR_T)GPIO3_BASE_ADDR)[GPIO_DR_I])
|
|
#define GPIO3_GDIR (((REG32_PTR_T)GPIO3_BASE_ADDR)[GPIO_GDIR_I])
|
|
#define GPIO3_PSR (((REG32_PTR_T)GPIO3_BASE_ADDR)[GPIO_PSR_I])
|
|
#define GPIO3_ICR1 (((REG32_PTR_T)GPIO3_BASE_ADDR)[GPIO_ICR1_I])
|
|
#define GPIO3_ICR2 (((REG32_PTR_T)GPIO3_BASE_ADDR)[GPIO_ICR2_I])
|
|
#define GPIO3_IMR (((REG32_PTR_T)GPIO3_BASE_ADDR)[GPIO_IMR_I])
|
|
#define GPIO3_ISR (((REG32_PTR_T)GPIO3_BASE_ADDR)[GPIO_ISR_I])
|
|
|
|
/* CSPI */
|
|
#define CSPI_RXDATA_I 0x00 /* Offset - 0x00 */
|
|
#define CSPI_TXDATA_I 0x01 /* Offset - 0x04 */
|
|
#define CSPI_CONREG_I 0x02 /* Offset - 0x08 */
|
|
#define CSPI_INTREG_I 0x03 /* Offset - 0x0C */
|
|
#define CSPI_DMAREG_I 0x04 /* Offset - 0x10 */
|
|
#define CSPI_STATREG_I 0x05 /* Offset - 0x14 */
|
|
#define CSPI_PERIODREG_I 0x06 /* Offset - 0x18 */
|
|
#define CSPI_TESTREG_I 0x70 /* Offset - 0x1C0 */
|
|
|
|
#define CSPI_RXDATA1 (((REG32_PTR_T)CSPI1_BASE_ADDR)[CSPI_RXDATA_I])
|
|
#define CSPI_TXDATA1 (((REG32_PTR_T)CSPI1_BASE_ADDR)[CSPI_TXDATA_I])
|
|
#define CSPI_CONREG1 (((REG32_PTR_T)CSPI1_BASE_ADDR)[CSPI_CONREG_I])
|
|
#define CSPI_INTREG1 (((REG32_PTR_T)CSPI1_BASE_ADDR)[CSPI_INTREG_I])
|
|
#define CSPI_DMAREG1 (((REG32_PTR_T)CSPI1_BASE_ADDR)[CSPI_DMAREG_I])
|
|
#define CSPI_STATREG1 (((REG32_PTR_T)CSPI1_BASE_ADDR)[CSPI_STATREG_I])
|
|
#define CSPI_PERIODREG1 (((REG32_PTR_T)CSPI1_BASE_ADDR)[CSPI_PERIODREG_I])
|
|
#define CSPI_TESTREG1 (((REG32_PTR_T)CSPI1_BASE_ADDR)[CSPI_TESTREG_I])
|
|
|
|
#define CSPI_RXDATA2 (((REG32_PTR_T)CSPI2_BASE_ADDR)[CSPI_RXDATA_I])
|
|
#define CSPI_TXDATA2 (((REG32_PTR_T)CSPI2_BASE_ADDR)[CSPI_TXDATA_I])
|
|
#define CSPI_CONREG2 (((REG32_PTR_T)CSPI2_BASE_ADDR)[CSPI_CONREG_I])
|
|
#define CSPI_INTREG2 (((REG32_PTR_T)CSPI2_BASE_ADDR)[CSPI_INTREG_I])
|
|
#define CSPI_DMAREG2 (((REG32_PTR_T)CSPI2_BASE_ADDR)[CSPI_DMAREG_I])
|
|
#define CSPI_STATREG2 (((REG32_PTR_T)CSPI2_BASE_ADDR)[CSPI_STATREG_I])
|
|
#define CSPI_PERIODREG2 (((REG32_PTR_T)CSPI2_BASE_ADDR)[CSPI_PERIODREG_I])
|
|
#define CSPI_TESTREG2 (((REG32_PTR_T)CSPI2_BASE_ADDR)[CSPI_TESTREG_I])
|
|
|
|
#define CSPI_RXDATA3 (((REG32_PTR_T)CSPI3_BASE_ADDR)[CSPI_RXDATA_I])
|
|
#define CSPI_TXDATA3 (((REG32_PTR_T)CSPI3_BASE_ADDR)[CSPI_TXDATA_I])
|
|
#define CSPI_CONREG3 (((REG32_PTR_T)CSPI3_BASE_ADDR)[CSPI_CONREG_I])
|
|
#define CSPI_INTREG3 (((REG32_PTR_T)CSPI3_BASE_ADDR)[CSPI_INTREG_I])
|
|
#define CSPI_DMAREG3 (((REG32_PTR_T)CSPI3_BASE_ADDR)[CSPI_DMAREG_I])
|
|
#define CSPI_STATREG3 (((REG32_PTR_T)CSPI3_BASE_ADDR)[CSPI_STATREG_I])
|
|
#define CSPI_PERIODREG3 (((REG32_PTR_T)CSPI3_BASE_ADDR)[CSPI_PERIODREG_I])
|
|
#define CSPI_TESTREG3 (((REG32_PTR_T)CSPI3_BASE_ADDR)[CSPI_TESTREG_I])
|
|
|
|
/* CSPI CONREG flags/fields */
|
|
#define CSPI_CONREG_CHIP_SELECT_SS0 (0 << 24)
|
|
#define CSPI_CONREG_CHIP_SELECT_SS1 (1 << 24)
|
|
#define CSPI_CONREG_CHIP_SELECT_SS2 (2 << 24)
|
|
#define CSPI_CONREG_CHIP_SELECT_SS3 (3 << 24)
|
|
#define CSPI_CONREG_CHIP_SELECT_MASK (3 << 24)
|
|
#define CSPI_CONREG_DRCTL_DONT_CARE (0 << 20)
|
|
#define CSPI_CONREG_DRCTL_TRIG_FALLING (1 << 20)
|
|
#define CSPI_CONREG_DRCTL_TRIG_LOW (2 << 20)
|
|
#define CSPI_CONREG_DRCTL_TRIG_RSV (3 << 20)
|
|
#define CSPI_CONREG_DRCTL_MASK (3 << 20)
|
|
#define CSPI_CONREG_DATA_RATE_DIV_4 (0 << 16)
|
|
#define CSPI_CONREG_DATA_RATE_DIV_8 (1 << 16)
|
|
#define CSPI_CONREG_DATA_RATE_DIV_16 (2 << 16)
|
|
#define CSPI_CONREG_DATA_RATE_DIV_32 (3 << 16)
|
|
#define CSPI_CONREG_DATA_RATE_DIV_64 (4 << 16)
|
|
#define CSPI_CONREG_DATA_RATE_DIV_128 (5 << 16)
|
|
#define CSPI_CONREG_DATA_RATE_DIV_256 (6 << 16)
|
|
#define CSPI_CONREG_DATA_RATE_DIV_512 (7 << 16)
|
|
#define CSPI_CONREG_DATA_RATE_DIV_MASK (7 << 16)
|
|
#define CSPI_BITCOUNT(n) ((n) << 8)
|
|
#define CSPI_CONREG_SSPOL (1 << 7)
|
|
#define CSPI_CONREG_SSCTL (1 << 6)
|
|
#define CSPI_CONREG_PHA (1 << 6)
|
|
#define CSPI_CONREG_POL (1 << 4)
|
|
#define CSPI_CONREG_SMC (1 << 3)
|
|
#define CSPI_CONREG_XCH (1 << 2)
|
|
#define CSPI_CONREG_MODE (1 << 1)
|
|
#define CSPI_CONREG_EN (1 << 0)
|
|
|
|
/* CSPI INTREG flags */
|
|
#define CSPI_INTREG_TCEN (1 << 8)
|
|
#define CSPI_INTREG_BOEN (1 << 7)
|
|
#define CSPI_INTREG_ROEN (1 << 6)
|
|
#define CSPI_INTREG_RFEN (1 << 5)
|
|
#define CSPI_INTREG_RHEN (1 << 4)
|
|
#define CSPI_INTREG_RREN (1 << 3)
|
|
#define CSPI_INTREG_TFEN (1 << 2)
|
|
#define CSPI_INTREG_THEN (1 << 1)
|
|
#define CSPI_INTREG_TEEN (1 << 0)
|
|
|
|
/* CSPI DMAREG flags */
|
|
#define CSPI_DMAREG_RFDEN (1 << 5)
|
|
#define CSPI_DMAREG_RHDEN (1 << 4)
|
|
#define CSPI_DMAREG_THDEN (1 << 1)
|
|
#define CSPI_DMAREG_TEDEN (1 << 0)
|
|
|
|
/* CSPI STATREG flags */
|
|
#define CSPI_STATREG_TC (1 << 8) /* w1c */
|
|
#define CSPI_STATREG_BO (1 << 7) /* w1c */
|
|
#define CSPI_STATREG_RO (1 << 6)
|
|
#define CSPI_STATREG_RF (1 << 5)
|
|
#define CSPI_STATREG_RH (1 << 4)
|
|
#define CSPI_STATREG_RR (1 << 3)
|
|
#define CSPI_STATREG_TF (1 << 2)
|
|
#define CSPI_STATREG_TH (1 << 1)
|
|
#define CSPI_STATREG_TE (1 << 0)
|
|
|
|
/* CSPI PERIODREG flags */
|
|
#define CSPI_PERIODREG_CSRC (1 << 15)
|
|
|
|
/* CSPI TESTREG flags */
|
|
#define CSPI_TESTREG_SWAP (1 << 15)
|
|
#define CSPI_TESTREG_LBC (1 << 14)
|
|
|
|
/* RTC */
|
|
#define RTC_HOURMIN (*(REG32_PTR_T)(RTC_BASE_ADDR+0x00))
|
|
#define RTC_SECONDS (*(REG32_PTR_T)(RTC_BASE_ADDR+0x04))
|
|
#define RTC_ALRM_HM (*(REG32_PTR_T)(RTC_BASE_ADDR+0x08))
|
|
#define RTC_ALRM_SEC (*(REG32_PTR_T)(RTC_BASE_ADDR+0x0C))
|
|
#define RTC_CTL (*(REG32_PTR_T)(RTC_BASE_ADDR+0x10))
|
|
#define RTC_ISR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x14))
|
|
#define RTC_IENR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x18))
|
|
#define RTC_STPWCH (*(REG32_PTR_T)(RTC_BASE_ADDR+0x1C))
|
|
#define RTC_DAYR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x20))
|
|
#define RTC_DAYALARM (*(REG32_PTR_T)(RTC_BASE_ADDR+0x24))
|
|
|
|
/* Keypad */
|
|
#define KPP_KPCR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x0))
|
|
#define KPP_KPSR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x2))
|
|
#define KPP_KDDR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x4))
|
|
#define KPP_KPDR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x6))
|
|
|
|
/* KPP_KPSR bits */
|
|
#define KPP_KPSR_KRIE (1 << 9)
|
|
#define KPP_KPSR_KDIE (1 << 8)
|
|
#define KPP_KPSR_KRSS (1 << 3)
|
|
#define KPP_KPSR_KDSC (1 << 2)
|
|
#define KPP_KPSR_KPKR (1 << 1)
|
|
#define KPP_KPSR_KPKD (1 << 0)
|
|
|
|
/* ROMPATCH and AVIC */
|
|
#define ROMPATCH_BASE_ADDR 0x60000000
|
|
|
|
/* Since AVIC vector registers are NOT used, we reserve some for various
|
|
* purposes. Copied from Linux source code. */
|
|
#define CHIP_REV_1_0 0x10
|
|
#define CHIP_REV_2_0 0x20
|
|
#define SYSTEM_REV_ID_REG (AVIC_BASE_ADDR + AVIC_VEC_1)
|
|
#define SYSTEM_REV_ID_MAG 0xF00C
|
|
|
|
/*
|
|
* NAND, SDRAM, WEIM, M3IF, EMI controllers
|
|
*/
|
|
#define EXT_MEM_CTRL_BASE 0xB8000000
|
|
#define NFC_BASE EXT_MEM_CTRL_BASE
|
|
#define ESDCTL_BASE 0xB8001000
|
|
#define WEIM_BASE_ADDR 0xB8002000
|
|
#define WEIM_CTRL_CS0 (WEIM_BASE_ADDR+0x00)
|
|
#define WEIM_CTRL_CS1 (WEIM_BASE_ADDR+0x10)
|
|
#define WEIM_CTRL_CS2 (WEIM_BASE_ADDR+0x20)
|
|
#define WEIM_CTRL_CS3 (WEIM_BASE_ADDR+0x30)
|
|
#define WEIM_CTRL_CS4 (WEIM_BASE_ADDR+0x40)
|
|
#define M3IF_BASE 0xB8003000
|
|
#define PCMCIA_CTL_BASE 0xB8004000
|
|
|
|
/*
|
|
* Memory regions and CS
|
|
*/
|
|
#define IPU_MEM_BASE_ADDR 0x70000000
|
|
#define CSD0_BASE_ADDR 0x80000000
|
|
#define CSD1_BASE_ADDR 0x90000000
|
|
#define CS0_BASE_ADDR 0xA0000000
|
|
#define CS1_BASE_ADDR 0xA8000000
|
|
#define CS2_BASE_ADDR 0xB0000000
|
|
#define CS3_BASE_ADDR 0xB2000000
|
|
#define CS4_BASE_ADDR 0xB4000000
|
|
#define CS4_BASE_PSRAM 0xB5000000
|
|
#define CS5_BASE_ADDR 0xB6000000
|
|
#define PCMCIA_MEM_BASE_ADDR 0xC0000000
|
|
|
|
#define INTERNAL_ROM_VA 0xF0000000
|
|
|
|
/*
|
|
* SDRAM
|
|
*/
|
|
#define RAM_BANK0_BASE SDRAM_BASE_ADDR
|
|
|
|
/*
|
|
* IRQ Controller Register Definitions.
|
|
*/
|
|
#define AVIC_BASE_ADDR 0x68000000
|
|
#define INTCNTL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x00))
|
|
#define NIMASK (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x04))
|
|
#define INTENNUM (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x08))
|
|
#define INTDISNUM (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x0C))
|
|
#define INTENABLEH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x10))
|
|
#define INTENABLEL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x14))
|
|
#define INTTYPEH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x18))
|
|
#define INTTYPEL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x1C))
|
|
#define NIPRIORITY(n) (((REG32_PTR_T)(AVIC_BASE_ADDR+0x20))[n])
|
|
#define NIPRIORITY7 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x20))
|
|
#define NIPRIORITY6 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x24))
|
|
#define NIPRIORITY5 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x28))
|
|
#define NIPRIORITY4 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x2C))
|
|
#define NIPRIORITY3 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x30))
|
|
#define NIPRIORITY2 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x34))
|
|
#define NIPRIORITY1 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x38))
|
|
#define NIPRIORITY0 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x3C))
|
|
#define NIVECSR (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x40))
|
|
#define FIVECSR (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x44))
|
|
#define INTSRCH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x48))
|
|
#define INTSRCL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x4C))
|
|
#define INTFRCH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x50))
|
|
#define INTFRCL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x54))
|
|
#define NIPNDH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x58))
|
|
#define NIPNDL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x5C))
|
|
#define FIPNDH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x60))
|
|
#define FIPNDL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x64))
|
|
#define VECTOR_BASE_ADDR (AVIC_BASE_ADDR+0x100)
|
|
#define VECTOR(n) (((REG32_PTR_T)VECTOR_BASE_ADDR)[n])
|
|
|
|
/* The vectors go all the way up to 63. 4 bytes for each */
|
|
#define INTCNTL_ABFLAG (1 << 25)
|
|
#define INTCNTL_ABFEN (1 << 24)
|
|
#define INTCNTL_NIDIS (1 << 22)
|
|
#define INTCNTL_FIDIS (1 << 21)
|
|
#define INTCNTL_NIAD (1 << 20)
|
|
#define INTCNTL_FIAD (1 << 19)
|
|
#define INTCNTL_NM (1 << 18)
|
|
|
|
/* L210 */
|
|
#define L2CC_BASE_ADDR 0x30000000
|
|
#define L2_CACHE_LINE_SIZE 32
|
|
#define L2_CACHE_CTL_REG 0x100
|
|
#define L2_CACHE_AUX_CTL_REG 0x104
|
|
#define L2_CACHE_SYNC_REG 0x730
|
|
#define L2_CACHE_INV_LINE_REG 0x770
|
|
#define L2_CACHE_INV_WAY_REG 0x77C
|
|
#define L2_CACHE_CLEAN_LINE_REG 0x7B0
|
|
#define L2_CACHE_CLEAN_INV_LINE_REG 0x7F0
|
|
|
|
#define L2CC_CACHE_SYNC (*(REG32_PTR_T)(L2CC_BASE_ADDR+L2_CACHE_SYNC_REG))
|
|
|
|
/* CCM */
|
|
#define CLKCTL_CCMR (*(REG32_PTR_T)(CCM_BASE_ADDR+0x00))
|
|
#define CLKCTL_PDR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x04))
|
|
#define CLKCTL_PDR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x08))
|
|
#define CLKCTL_RCSR (*(REG32_PTR_T)(CCM_BASE_ADDR+0x0C))
|
|
#define CLKCTL_MPCTL (*(REG32_PTR_T)(CCM_BASE_ADDR+0x10))
|
|
#define CLKCTL_UPCTL (*(REG32_PTR_T)(CCM_BASE_ADDR+0x14))
|
|
#define CLKCTL_SPCTL (*(REG32_PTR_T)(CCM_BASE_ADDR+0x18))
|
|
#define CLKCTL_COSR (*(REG32_PTR_T)(CCM_BASE_ADDR+0x1C))
|
|
#define CLKCTL_CGR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x20))
|
|
#define CLKCTL_CGR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x24))
|
|
#define CLKCTL_CGR2 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x28))
|
|
#define CLKCTL_WIMR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x2C))
|
|
#define CLKCTL_LDC (*(REG32_PTR_T)(CCM_BASE_ADDR+0x30))
|
|
#define CLKCTL_DCVR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x34))
|
|
#define CLKCTL_DCVR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x38))
|
|
#define CLKCTL_DCVR2 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x3C))
|
|
#define CLKCTL_DCVR3 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x40))
|
|
#define CLKCTL_LTR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x44))
|
|
#define CLKCTL_LTR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x48))
|
|
#define CLKCTL_LTR2 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x4C))
|
|
#define CLKCTL_LTR3 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x50))
|
|
#define CLKCTL_LTBR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x54))
|
|
#define CLKCTL_LTBR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x58))
|
|
#define CLKCTL_PMCR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x5C))
|
|
#define CLKCTL_PMCR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x60))
|
|
#define CLKCTL_PDR2 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x64))
|
|
|
|
#define CGR0_SD_MMC1(cg) ((cg) << 0*2)
|
|
#define CGR0_SD_MMC2(cg) ((cg) << 1*2)
|
|
#define CGR0_GPT(cg) ((cg) << 2*2)
|
|
#define CGR0_EPIT1(cg) ((cg) << 3*2)
|
|
#define CGR0_EPIT2(cg) ((cg) << 4*2)
|
|
#define CGR0_IIM(cg) ((cg) << 5*2)
|
|
#define CGR0_ATA(cg) ((cg) << 6*2)
|
|
#define CGR0_SDMA(cg) ((cg) << 7*2)
|
|
#define CGR0_CSPI3(cg) ((cg) << 8*2)
|
|
#define CGR0_RNG(cg) ((cg) << 9*2)
|
|
#define CGR0_UART1(cg) ((cg) << 10*2)
|
|
#define CGR0_UART2(cg) ((cg) << 11*2)
|
|
#define CGR0_SSI1(cg) ((cg) << 12*2)
|
|
#define CGR0_I2C1(cg) ((cg) << 13*2)
|
|
#define CGR0_I2C2(cg) ((cg) << 14*2)
|
|
#define CGR0_I2C3(cg) ((cg) << 15*2)
|
|
|
|
#define CGR1_HANTRO(cg) ((cg) << 0*2)
|
|
#define CGR1_MEMSTICK1(cg) ((cg) << 1*2)
|
|
#define CGR1_MEMSTICK2(cg) ((cg) << 2*2)
|
|
#define CGR1_CSI(cg) ((cg) << 3*2)
|
|
#define CGR1_RTC(cg) ((cg) << 4*2)
|
|
#define CGR1_WDOG(cg) ((cg) << 5*2)
|
|
#define CGR1_PWM(cg) ((cg) << 6*2)
|
|
#define CGR1_SIM(cg) ((cg) << 7*2)
|
|
#define CGR1_ECT(cg) ((cg) << 8*2)
|
|
#define CGR1_USBOTG(cg) ((cg) << 9*2)
|
|
#define CGR1_KPP(cg) ((cg) << 10*2)
|
|
#define CGR1_IPU(cg) ((cg) << 11*2)
|
|
#define CGR1_UART3(cg) ((cg) << 12*2)
|
|
#define CGR1_UART4(cg) ((cg) << 13*2)
|
|
#define CGR1_UART5(cg) ((cg) << 14*2)
|
|
#define CGR1_1_WIRE(cg) ((cg) << 15*2)
|
|
|
|
#define CGR2_SSI2(cg) ((cg) << 0*2)
|
|
#define CGR2_CSPI1(cg) ((cg) << 1*2)
|
|
#define CGR2_CSPI2(cg) ((cg) << 2*2)
|
|
#define CGR2_GACC(cg) ((cg) << 3*2)
|
|
#define CGR2_EMI(cg) ((cg) << 4*2)
|
|
#define CGR2_RTIC(cg) ((cg) << 5*2)
|
|
#define CGR2_FIR(cg) ((cg) << 6*2)
|
|
|
|
#define WIM_GPIO3 (1 << 0)
|
|
#define WIM_GPIO2 (1 << 1)
|
|
#define WIM_GPIO1 (1 << 2)
|
|
#define WIM_PCMCIA (1 << 3)
|
|
#define WIM_WDT (1 << 4)
|
|
#define WIM_USB_OTG (1 << 5)
|
|
#define WIM_IPI_INT_UH2 (1 << 6)
|
|
#define WIM_IPI_INT_UH1 (1 << 7)
|
|
#define WIM_IPI_INT_UART5_ANDED (1 << 8)
|
|
#define WIM_IPI_INT_UART4_ANDED (1 << 9)
|
|
#define WIM_IPI_INT_UART3_ANDED (1 << 10)
|
|
#define WIM_IPI_INT_UART2_ANDED (1 << 11)
|
|
#define WIM_IPI_INT_UART1_ANDED (1 << 12)
|
|
#define WIM_IPI_INT_SIM_DATA_IRQ (1 << 13)
|
|
#define WIM_IPI_INT_SDHC2 (1 << 14)
|
|
#define WIM_IPI_INT_SDHC1 (1 << 15)
|
|
#define WIM_IPI_INT_RTC (1 << 16)
|
|
#define WIM_IPI_INT_PWM (1 << 17)
|
|
#define WIM_IPI_INT_KPP (1 << 18)
|
|
#define WIM_IPI_INT_IIM (1 << 19)
|
|
#define WIM_IPI_INT_GPT (1 << 20)
|
|
#define WIM_IPI_INT_FIR (1 << 21)
|
|
#define WIM_IPI_INT_EPIT2 (1 << 22)
|
|
#define WIM_IPI_INT_EPIT1 (1 << 23)
|
|
#define WIM_IPI_INT_CSPI2 (1 << 24)
|
|
#define WIM_IPI_INT_CSPI1 (1 << 25)
|
|
#define WIM_IPI_INT_POWER_FAIL (1 << 26)
|
|
#define WIM_IPI_INT_CSPI3 (1 << 27)
|
|
#define WIM_RESERVED28 (1 << 28)
|
|
#define WIM_RESERVED29 (1 << 29)
|
|
#define WIM_RESERVED30 (1 << 30)
|
|
#define WIM_RESERVED31 (1 << 31)
|
|
|
|
/* WEIM - CS0 */
|
|
#define CSCRU 0x00
|
|
#define CSCRL 0x04
|
|
#define CSCRA 0x08
|
|
|
|
/* ESDCTL */
|
|
#define ESDCTL_ESDCTL0 0x00
|
|
#define ESDCTL_ESDCFG0 0x04
|
|
#define ESDCTL_ESDCTL1 0x08
|
|
#define ESDCTL_ESDCFG1 0x0C
|
|
#define ESDCTL_ESDMISC 0x10
|
|
|
|
/* More UART 1 Register defines */
|
|
#define URXD1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x00))
|
|
#define UTXD1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x40))
|
|
#define UCR1_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x80))
|
|
#define UCR2_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x84))
|
|
#define UCR3_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x88))
|
|
#define UCR4_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x8C))
|
|
#define UFCR1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x90))
|
|
#define USR1_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x94))
|
|
#define USR2_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x98))
|
|
#define UTS1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0xB4))
|
|
|
|
/*
|
|
* UART Control Register 0 Bit Fields.
|
|
*/
|
|
#define EUARTUCR1_ADEN (1 << 15) // Auto detect interrupt
|
|
#define EUARTUCR1_ADBR (1 << 14) // Auto detect baud rate
|
|
#define EUARTUCR1_TRDYEN (1 << 13) // Transmitter ready interrupt enable
|
|
#define EUARTUCR1_IDEN (1 << 12) // Idle condition interrupt
|
|
#define EUARTUCR1_RRDYEN (1 << 9) // Recv ready interrupt enable
|
|
#define EUARTUCR1_RDMAEN (1 << 8) // Recv ready DMA enable
|
|
#define EUARTUCR1_IREN (1 << 7) // Infrared interface enable
|
|
#define EUARTUCR1_TXMPTYEN (1 << 6) // Transimitter empt interrupt enable
|
|
#define EUARTUCR1_RTSDEN (1 << 5) // RTS delta interrupt enable
|
|
#define EUARTUCR1_SNDBRK (1 << 4) // Send break
|
|
#define EUARTUCR1_TDMAEN (1 << 3) // Transmitter ready DMA enable
|
|
#define EUARTUCR1_DOZE (1 << 1) // Doze
|
|
#define EUARTUCR1_UARTEN (1 << 0) // UART enabled
|
|
#define EUARTUCR2_ESCI (1 << 15) // Escape seq interrupt enable
|
|
#define EUARTUCR2_IRTS (1 << 14) // Ignore RTS pin
|
|
#define EUARTUCR2_CTSC (1 << 13) // CTS pin control
|
|
#define EUARTUCR2_CTS (1 << 12) // Clear to send
|
|
#define EUARTUCR2_ESCEN (1 << 11) // Escape enable
|
|
#define EUARTUCR2_PREN (1 << 8) // Parity enable
|
|
#define EUARTUCR2_PROE (1 << 7) // Parity odd/even
|
|
#define EUARTUCR2_STPB (1 << 6) // Stop
|
|
#define EUARTUCR2_WS (1 << 5) // Word size
|
|
#define EUARTUCR2_RTSEN (1 << 4) // Request to send interrupt enable
|
|
#define EUARTUCR2_ATEN (1 << 3) // Aging timer enable
|
|
#define EUARTUCR2_TXEN (1 << 2) // Transmitter enabled
|
|
#define EUARTUCR2_RXEN (1 << 1) // Receiver enabled
|
|
#define EUARTUCR2_SRST_ (1 << 0) // SW reset
|
|
#define EUARTUCR3_PARERREN (1 << 12) // Parity enable
|
|
#define EUARTUCR3_FRAERREN (1 << 11) // Frame error interrupt enable
|
|
#define EUARTUCR3_ADNIMP (1 << 7) // Autobaud detection not improved
|
|
#define EUARTUCR3_RXDSEN (1 << 6) // Receive status interrupt enable
|
|
#define EUARTUCR3_AIRINTEN (1 << 5) // Async IR wake interrupt enable
|
|
#define EUARTUCR3_AWAKEN (1 << 4) // Async wake interrupt enable
|
|
#define EUARTUCR3_RXDMUXSEL (1 << 2) // RXD muxed input selected
|
|
#define EUARTUCR3_INVT (1 << 1) // Inverted Infrared transmission
|
|
#define EUARTUCR3_ACIEN (1 << 0) // Autobaud counter interrupt enable
|
|
#define EUARTUCR4_CTSTL_32 (32 << 10) // CTS trigger level (32 chars)
|
|
#define EUARTUCR4_INVR (1 << 9) // Inverted infrared reception
|
|
#define EUARTUCR4_ENIRI (1 << 8) // Serial infrared interrupt enable
|
|
#define EUARTUCR4_WKEN (1 << 7) // Wake interrupt enable
|
|
#define EUARTUCR4_IRSC (1 << 5) // IR special case
|
|
#define EUARTUCR4_LPBYP (1 << 4) // Low power bypass
|
|
#define EUARTUCR4_TCEN (1 << 3) // Transmit complete interrupt enable
|
|
#define EUARTUCR4_BKEN (1 << 2) // Break condition interrupt enable
|
|
#define EUARTUCR4_OREN (1 << 1) // Receiver overrun interrupt enable
|
|
#define EUARTUCR4_DREN (1 << 0) // Recv data ready interrupt enable
|
|
#define EUARTUFCR_RXTL_SHF 0 // Receiver trigger level shift
|
|
#define EUARTUFCR_RFDIV_1 (5 << 7) // Reference freq divider (div> 1)
|
|
#define EUARTUFCR_RFDIV_2 (4 << 7) // Reference freq divider (div> 2)
|
|
#define EUARTUFCR_RFDIV_3 (3 << 7) // Reference freq divider (div 3)
|
|
#define EUARTUFCR_RFDIV_4 (2 << 7) // Reference freq divider (div 4)
|
|
#define EUARTUFCR_RFDIV_5 (1 << 7) // Reference freq divider (div 5)
|
|
#define EUARTUFCR_RFDIV_6 (0 << 7) // Reference freq divider (div 6)
|
|
#define EUARTUFCR_RFDIV_7 (6 << 7) // Reference freq divider (div 7)
|
|
#define EUARTUFCR_TXTL_SHF 10 // Transmitter trigger level shift
|
|
#define EUARTUSR1_PARITYERR (1 << 15) // Parity error interrupt flag
|
|
#define EUARTUSR1_RTSS (1 << 14) // RTS pin status
|
|
#define EUARTUSR1_TRDY (1 << 13) // Transmitter ready interrupt/dma flag
|
|
#define EUARTUSR1_RTSD (1 << 12) // RTS delta
|
|
#define EUARTUSR1_ESCF (1 << 11) // Escape seq interrupt flag
|
|
#define EUARTUSR1_FRAMERR (1 << 10) // Frame error interrupt flag
|
|
#define EUARTUSR1_RRDY (1 << 9) // Receiver ready interrupt/dma flag
|
|
#define EUARTUSR1_AGTIM (1 << 8) // Aging timeout interrupt status
|
|
#define EUARTUSR1_RXDS (1 << 6) // Receiver idle interrupt flag
|
|
#define EUARTUSR1_AIRINT (1 << 5) // Async IR wake interrupt flag
|
|
#define EUARTUSR1_AWAKE (1 << 4) // Aysnc wake interrupt flag
|
|
#define EUARTUSR2_ADET (1 << 15) // Auto baud rate detect complete
|
|
#define EUARTUSR2_TXFE (1 << 14) // Transmit buffer FIFO empty
|
|
#define EUARTUSR2_IDLE (1 << 12) // Idle condition
|
|
#define EUARTUSR2_ACST (1 << 11) // Autobaud counter stopped
|
|
#define EUARTUSR2_IRINT (1 << 8) // Serial infrared interrupt flag
|
|
#define EUARTUSR2_WAKE (1 << 7) // Wake
|
|
#define EUARTUSR2_RTSF (1 << 4) // RTS edge interrupt flag
|
|
#define EUARTUSR2_TXDC (1 << 3) // Transmitter complete
|
|
#define EUARTUSR2_BRCD (1 << 2) // Break condition
|
|
#define EUARTUSR2_ORE (1 << 1) // Overrun error
|
|
#define EUARTUSR2_RDR (1 << 0) // Recv data ready
|
|
#define EUARTUTS_FRCPERR (1 << 13) // Force parity error
|
|
#define EUARTUTS_LOOP (1 << 12) // Loop tx and rx
|
|
#define EUARTUTS_TXEMPTY (1 << 6) // TxFIFO empty
|
|
#define EUARTUTS_RXEMPTY (1 << 5) // RxFIFO empty
|
|
#define EUARTUTS_TXFULL (1 << 4) // TxFIFO full
|
|
#define EUARTUTS_RXFULL (1 << 3) // RxFIFO full
|
|
#define EUARTUTS_SOFTRST (1 << 0) // Software reset
|
|
|
|
#define L2CC_ENABLED
|
|
|
|
/* Assuming 26MHz input clock */
|
|
/* PD MFD MFI MFN */
|
|
#define MPCTL_PARAM_208 ((1 << 26) + (0 << 16) + (8 << 10) + (0 << 0))
|
|
#define MPCTL_PARAM_399 ((0 << 26) + (51 << 16) + (7 << 10) + (35 << 0))
|
|
#define MPCTL_PARAM_532 ((0 << 26) + (51 << 16) + (10 << 10) + (12 << 0))
|
|
|
|
/* UPCTL PD MFD MFI MFN */
|
|
#define UPCTL_PARAM_288 (((1-1) << 26) + ((13-1) << 16) + (5 << 10) + (7 << 0))
|
|
#define UPCTL_PARAM_240 (((2-1) << 26) + ((13-1) << 16) + (9 << 10) + (3 << 0))
|
|
|
|
/* PDR0 */
|
|
#define PDR0_208_104_52 0xFF870D48 /* ARM=208MHz, HCLK=104MHz, IPG=52MHz */
|
|
#define PDR0_399_66_66 0xFF872B28 /* ARM=399MHz, HCLK=IPG=66.5MHz */
|
|
#define PDR0_399_133_66 0xFF871650 /* ARM=399MHz, HCLK=133MHz, IPG=66.5MHz */
|
|
#define PDR0_532_133_66 0xFF871E58 /* ARM=532MHz, HCLK=133MHz, IPG=66MHz */
|
|
#define PDR0_665_83_66 0xFF873D78 /* ARM=532MHz, HCLK=133MHz, IPG=66MHz */
|
|
#define PDR0_665_133_66 0xFF872660 /* ARM=532MHz, HCLK=133MHz, IPG=66MHz */
|
|
|
|
#define PBC_BASE CS4_BASE_ADDR /* Peripheral Bus Controller */
|
|
|
|
#define PBC_BSTAT2 0x2
|
|
#define PBC_BCTRL1 0x4
|
|
#define PBC_BCTRL1_CLR 0x6
|
|
#define PBC_BCTRL2 0x8
|
|
#define PBC_BCTRL2_CLR 0xA
|
|
#define PBC_BCTRL3 0xC
|
|
#define PBC_BCTRL3_CLR 0xE
|
|
#define PBC_BCTRL4 0x10
|
|
#define PBC_BCTRL4_CLR 0x12
|
|
#define PBC_BSTAT1 0x14
|
|
#define MX31EVB_CS_LAN_BASE (CS4_BASE_ADDR + 0x00020000 + 0x300)
|
|
#define MX31EVB_CS_UART_BASE (CS4_BASE_ADDR + 0x00010000)
|
|
|
|
#define REDBOOT_IMAGE_SIZE 0x40000
|
|
|
|
#define SDRAM_WORKAROUND_FULL_PAGE
|
|
|
|
#define ARMHIPG_208_52_52 /* ARM: 208MHz, HCLK=IPG=52MHz*/
|
|
#define ARMHIPG_52_52_52 /* ARM: 52MHz, HCLK=IPG=52MHz*/
|
|
#define ARMHIPG_399_66_66
|
|
#define ARMHIPG_399_133_66
|
|
|
|
/* MX31 EVB SDRAM is from 0x80000000, 64M */
|
|
#define SDRAM_BASE_ADDR CSD0_BASE_ADDR
|
|
#define SDRAM_SIZE 0x04000000
|
|
|
|
#define UART_WIDTH_32 /* internal UART is 32bit access only */
|
|
#define EXT_UART_x16
|
|
|
|
#define UART_WIDTH_32 /* internal UART is 32bit access only */
|
|
|
|
#define FLASH_BURST_MODE_ENABLE 1
|
|
#define SDRAM_COMPARE_CONST1 0x55555555
|
|
#define SDRAM_COMPARE_CONST2 0xAAAAAAAA
|
|
#define UART_FIFO_CTRL 0x881
|
|
#define TIMEOUT 1000
|
|
#define writel(v,a) (*(REG32_PTR_T)(a) = (v))
|
|
#define readl(a) (*(REG32_PTR_T)(a))
|
|
#define writew(v,a) (*(REG16_PTR_T)(a) = (v))
|
|
#define readw(a) (*(REG16_PTR_T)(a))
|
|
|
|
#define USB_BASE OTG_BASE_ADDR
|
|
|
|
#endif /* __IMX31L_H__ */
|