rockbox/firmware/target/arm/philips/hdd1630/powermgmt-hdd1630.c
Mark Arigo 5d5bab7ed4 Philips HDD1630 - working battery voltage readings. Still needs to be calibrated.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19998 a1c6a512-1295-4272-9138-f99709370657
2009-02-13 04:25:09 +00:00

72 lines
2.3 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Heikki Hannikainen, Uwe Freese
* Revisions copyright (C) 2005 by Gerald Van Baren
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "adc.h"
#include "powermgmt.h"
#define SMLAL(lo, hi, x, y) \
asm volatile ("smlal %0, %1, %2, %3" \
: "+r" (lo), "+r" (hi) \
: "%r" (x), "r" (y))
const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
{
3550
};
const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
{
3500
};
/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
{
{ 3480, 3550, 3590, 3610, 3630, 3650, 3700, 3760, 3800, 3910, 3990 },
};
#if CONFIG_CHARGING
/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
const unsigned short percent_to_volt_charge[11] =
{
3480, 3550, 3590, 3610, 3630, 3650, 3700, 3760, 3800, 3910, 3990
};
#endif /* CONFIG_CHARGING */
#define BATTERY_SCALE_FACTOR 4200
/* full-scale ADC readout (2^10) in millivolt */
/* Returns battery voltage from ADC [millivolts] */
unsigned int battery_adc_voltage(void)
{
/* return (adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR) >> 10; */
/* This may be overly complicated (pulled from the OF) */
int lo = 0;
int val = adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR;
SMLAL(lo, val, 0x8a42f871, val);
val>>= 9;
val -= (val >> 31);
return val;
}