..
sansa-c200v2
Sansa c200v2: update DBOP button reading mechanism, this enables readout of the volume buttons, rec and hold button.
2009-09-05 18:56:59 +00:00
sansa-clip
Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled
2009-08-15 15:02:51 +00:00
sansa-e200v2
Fix "lcd driver speed up" on e200v2
2009-09-30 18:54:42 +00:00
sansa-fuze
Sansa Fuze/e200v2: protect lcd a little better against concurrent access
2009-09-26 10:47:10 +00:00
sansa-m200v4
Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled
2009-08-15 15:02:51 +00:00
adc-target.h
app.lds
FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
2009-06-08 23:05:33 +00:00
ascodec-as3525.c
Sansa AMS : don't use the SHAREDBSS_ATTR since we don't have a coprocessor
2009-06-02 22:45:02 +00:00
ascodec-target.h
FS#10344 - AMSSansa Dynamically adjust core voltage to extend playtime.
2009-06-30 17:56:21 +00:00
ata_sd_as3525.c
AMS Sansa: If SD card is HS capable set High Speed timings.
2009-10-11 03:11:13 +00:00
audio-as3525.c
backlight-e200v2-fuze.c
FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2)
2009-06-18 22:33:02 +00:00
boot.lds
FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
2009-06-08 23:05:33 +00:00
button-e200v2-fuze.c
Fuze/e200v2: Fix inaccuracy when moving the wheel slowly (fixes FS#10667).
2009-10-09 23:27:38 +00:00
clock-target.h
AMSSansa: Add AS3525_DRAM_FREQ as a configurable frequency. Attempts to use PCLK != DRAM still fail but a method is now in place. Default scheme remains 248/62/62.
2009-05-29 20:19:35 +00:00
debug-as3525.c
AMS Sansa: Adjust View HW info page to display SD and uSD MCICLK freqs instead
2009-09-12 20:50:11 +00:00
debug-target.h
dma-pl081.c
dma-target.h
fmradio-i2c-as3525.c
Fix delays in generic i2c driver, reduce delays in ams sansa fmradio i2c driver (tested on m200v4, clip, e200v2, fuze).
2009-06-20 21:45:04 +00:00
i2s-as3525.c
kernel-as3525.c
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
2009-06-29 14:30:12 +00:00
lcd-as-e200v2-fuze.S
ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.
2009-07-11 23:43:44 +00:00
pcm-as3525.c
FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
2009-06-08 23:05:33 +00:00
power-as3525.c
powermgmt-as3525.c
powermgmt-target.h
Enable charging on the Sansa Fuze (charging/discharging curves are still uncalibrated)
2009-06-20 14:29:21 +00:00
system-as3525.c
Sansa AMS: identify interrupts with no source set
2009-08-11 13:20:55 +00:00
system-target.h
ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.
2009-07-05 01:17:25 +00:00
timer-as3525.c
Remove the TIMER_* macros and declare target-specific functions in timer.h
2009-06-29 14:29:57 +00:00
usb-as3525.c
Fix #includes in usb-as3525.c
2009-04-12 19:08:26 +00:00
usb-drv-as3525.c
Samsa AMS: start of an USB driver (nothing working atm)
2009-07-06 13:54:51 +00:00
14079c39f0