..
archos /av300
as3525
Sansa Clip+: use 8 bits transfers, like DMA transfers
2010-02-08 08:20:42 +00:00
at91sam
imx31
ARM: lr addresses the next instruction after the failing one in undefined instruction vector
2010-01-24 15:04:21 +00:00
ipod
FS#10107: work around the issue on some ipods where after shutdown they do not power on.
2010-01-09 19:04:51 +00:00
iriver
Fix tabs
2010-01-03 10:19:43 +00:00
olympus
Comment out LOGF_ENABLE defines everywhere, replace evil comments
2009-11-03 16:25:03 +00:00
pbell
Remove tabs
2010-02-07 17:50:24 +00:00
philips
Fix even more tabs
2010-01-03 10:35:31 +00:00
pnx0101
ARM: lr addresses the next instruction after the failing one in undefined instruction vector
2010-01-24 15:04:21 +00:00
s3c2440
ARM: lr addresses the next instruction after the failing one in undefined instruction vector
2010-01-24 15:04:21 +00:00
s5l8700
Label dma_callback in pcm-s5l8700.c as used so that gcc won't discard it, and cause a link failure on eabi.
2010-02-03 16:36:55 +00:00
samsung
Fix tabs
2010-01-03 10:19:43 +00:00
sandisk
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
2009-10-20 21:54:59 +00:00
tatung
Tatung Elio: a few more buttons identified
2009-11-24 15:42:54 +00:00
tcc77x
Remove tabs
2010-02-07 17:50:24 +00:00
tcc780x
ARM: lr addresses the next instruction after the failing one in undefined instruction vector
2010-01-24 15:04:21 +00:00
tms320dm320
Remove tabs
2010-02-07 17:50:24 +00:00
adc-as3514.c
adc-pp5020.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
2010-01-18 19:05:20 +00:00
ascodec-pp.c
ascodec-target.h
ata-as-arm.S
M:Robe 500 - Enable ASM optimized ATA interface improving disk access speed.
2009-11-09 00:38:10 +00:00
ata-nand-telechips.c
ata-pp5002.c
ata-pp5020.c
Enable ATA DMA on pp5020 based players with ATA drives.
2010-01-31 11:07:29 +00:00
ata-sd-pp.c
Remove unused card_detect(), and make card_detect_target() static inline in each sd driver.
2009-11-26 00:51:09 +00:00
ata-target.h
Enable ATA DMA on pp5020 based players with ATA drives.
2010-01-31 11:07:29 +00:00
audio-pp.c
correction on DEFINE, thanks to Kugel who spotted it ;)
2009-12-01 18:11:06 +00:00
crt0-pp-bl.S
Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio.
2009-12-25 04:05:01 +00:00
crt0-pp.S
ARM: lr addresses the next instruction after the failing one in undefined instruction vector
2010-01-24 15:04:21 +00:00
crt0.S
ARM: lr addresses the next instruction after the failing one in undefined instruction vector
2010-01-24 15:04:21 +00:00
ffs-arm.S
ARM <= v5: Tiny optimisation exploiting the location of the table.
2009-12-26 13:22:51 +00:00
i2c-pp.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
2010-01-18 19:05:20 +00:00
i2c-telechips.c
i2s-pp.c
kernel-pp.c
lcd-as-memframe.S
lcd-c200_c200v2.c
Sansa AMS: refactor DBOP button reading (e200v2/Fuze/c200v2)
2010-01-06 23:41:36 +00:00
lcd-ssd1815.c
memcpy-arm.S
Remove tabs
2010-02-07 17:50:24 +00:00
memmove-arm.S
Remove tabs
2010-02-07 17:50:24 +00:00
memset-arm.S
memset16-arm.S
mmu-arm.h
mmu-arm.S
Split ARMv6 code from mmu-arm.S
2009-10-18 13:07:14 +00:00
mmu-armv6.S
Split ARMv6 code from mmu-arm.S
2009-10-18 13:07:14 +00:00
pcm-pp.c
pcm-telechips.c
powermgmt-ascodec.c
sd-pp-target.h
support-arm.S
Correct ARMv5/6 signed divider, which was not saving return address to stack before using lr for calculation.
2010-02-02 15:55:10 +00:00
system-arm.c
Fix dangling #endif
2009-11-14 11:37:16 +00:00
system-arm.h
Change "r" back to "i" (i is for immediate, so no syntax error) and reclaim a bit binsize. Live with that those function don't build with -O0 since they rely on inlining.
2009-11-15 22:29:22 +00:00
system-pp502x.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
2010-01-18 19:05:20 +00:00
system-pp5002.c
Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.
2009-10-19 21:38:52 +00:00
system-target.h
timer-pp.c
usb-drv-arc.c
Fix tabs
2010-01-03 10:19:43 +00:00
usb-fw-pp502x.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
2010-01-18 19:05:20 +00:00
usb-fw-pp5002.c
usb-s3c6400x.c
Fix iPod Nano 2G USB:
2010-01-17 19:05:42 +00:00
usb-target.h
usb-tcc.c
Make the tcc usb driver compile without warnings. No functional changes
2010-01-19 21:17:32 +00:00
wmcodec-pp.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
2010-01-18 19:05:20 +00:00
wmcodec-telechips.c
3f43765925