Jens Arnold 7c37c54ce5 iPod 1st Gen: Dynamic wheel enable. This reduces wheel power consumption to about 0.5% when hold is not enabled and there is no activity, and keeps it disabled on hold. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14386 a1c6a512-1295-4272-9138-f99709370657		2007-08-18 09:47:19 +00:00
..
archos/av300	Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.	2007-08-14 22:06:23 +00:00
ipod	iPod 1st Gen: Dynamic wheel enable. This reduces wheel power consumption to about 0.5% when hold is not enabled and there is no activity, and keeps it disabled on hold.	2007-08-18 09:47:19 +00:00
iriver	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
pnx0101	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
s3c2440/gigabeat-fx	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
sandisk/sansa-e200	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
tatung/tpj1022	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
ata-as-arm.S	Improved CPU clock setup for PP502x. PP5020 and PP5022 are not register compatible here, so define the PP5022 targets properly, and introduce a CPU_PP502x macro for easier family check. Improves stability on PP5020 (less freezing, tested with Mini G1) and reduces clock change penalty (500us on PP5020; uses the relock bit on PP5022).	2007-07-02 05:16:40 +00:00
ata-pp5002.c
ata-pp5020.c	Some more replacing of inl/outl with register #define's (doesn't change end-result binary). Add lots more #define's based on the ipodlinux wiki and some extrapolation.	2007-03-03 23:37:17 +00:00
ata-target.h	PP5002 ATA driver needs to wait for the controller to be ready again before writing the next control register value. Makes check_registers() not fail in the bootloader.	2007-08-03 09:34:42 +00:00
audio-pp.c	Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.	2007-06-08 23:42:04 +00:00
crt0-pp-bl.S
crt0-pp.S	PP50xx: COP was left in undefined mode after init. Switch it to supervisor mode before entering cop_main.	2007-08-01 20:59:27 +00:00
crt0.S	Gigabeat: Use vectored IRQ mode interrupts and add a trap for unhandled ones.	2007-07-05 07:14:24 +00:00
i2c-pp.c	Change i2c config on e200. Seems to speed things up somewhat.	2007-05-17 22:49:27 +00:00
i2s-pp.c	Reenable scaling on Sansa since a reasonable solution to clicks has been found.	2007-07-26 10:46:17 +00:00
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
memswap128-arm.S	SWCODEC: Get rid of extra swap buffer and get back 512K of RAM or 100K if the players RAM is <= 1MB. Make any needed changes to things to stabilize and facilitate this including removing flattening out initialization. Comment some things heavily. Fix a few logfs I didn't want to see the compiler complaining about.	2007-03-19 22:04:17 +00:00
pcm-pp.c	Reenable scaling on Sansa since a reasonable solution to clicks has been found.	2007-07-26 10:46:17 +00:00
system-arm.h	Clean up PP502x CPU clock setup code and use the full 80MHz when boosted.	2007-07-26 15:07:16 +00:00
system-pp502x.c	Fix PP502x clock source masking.	2007-08-01 12:51:06 +00:00
system-pp5002.c	Reduced battery consumption on PP5002 targets (iPod 1st/2nd gen and 3rd gen). Now rockbox battery runtime is better than OF, verified on 2nd gen :-)	2007-08-06 17:26:28 +00:00
system-target.h	PP502x: Clock setup cleanup.	2007-07-31 20:48:49 +00:00
usb-fw-pp502x.c	Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup.	2007-08-01 22:44:02 +00:00
usb-fw-pp5002.c	Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup.	2007-08-01 22:44:02 +00:00
usb-target.h	Fix USB detection on ipods and other portalplayer targets - Rockbox now correctly distinguishes between a USB connection to a computer and a connection to a USB AC charger. Based on the experimental USB code in FS #6494 by Barry Wardell. Closes FS #4724.	2007-02-04 21:46:01 +00:00
wmcodec-pp.c	Sound working on iPod 2nd gen, but very unstable (applies also to 3rd gen). Freezes most of the time. Reverting the >66MHz unlock makes it a bit better, but also not stable. Using the C FIQ has the same effect.	2007-07-27 18:15:03 +00:00