.. |
common
|
Correct usage of ICODE_ATTR in memcpy.c and strlen.c
|
2005-08-15 05:33:10 +00:00 |
drivers
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
export
|
Change ROMbox to use BootBox-suitable start address. This will "break" it until the BootBox "rollout", with v2.5.
|
2005-08-30 05:40:05 +00:00 |
include
|
Cast to unsigned isn't enough in the isXXXX macros (chars > 127 caused a negative array index). With a cast to unsigned char, the macros work as expected. The other macros were changed accordingly.
|
2005-08-11 19:32:39 +00:00 |
test
|
|
|
app.lds
|
ReplayGain support for Ogg Vorbis files (also called VorbisGain) added.
|
2005-07-24 15:32:28 +00:00 |
backlight.c
|
iriver: Always turn on the backlight in backlight_init()
|
2005-08-15 07:18:36 +00:00 |
bidi.c
|
Patch #783877 by Gadi Cohen updated by Naftali Goldstein - Bidirectional text support for Hebrew and Arabic
|
2005-08-08 19:23:28 +00:00 |
bitswap.S
|
|
|
boot.lds
|
Added CPU_COLDFIRE define - one step closer to iAudio-port
|
2005-07-18 12:40:29 +00:00 |
buffer.c
|
|
|
COPYING
|
|
|
crt0.S
|
Recovered from my major brain failure and reverted to using the same load address for both H110 and H120/140
|
2005-07-09 07:46:42 +00:00 |
debug.c
|
Enlarged the buffer for DEBUGF()
|
2005-08-16 08:32:43 +00:00 |
descramble.S
|
|
|
FILES
|
|
|
font.c
|
|
|
hwcompat.c
|
|
|
id3.c
|
Patch #1161046 by Bryan Vandyke - id3v2 frames with size 0 may cause rockbox to miss tags
|
2005-08-30 13:01:44 +00:00 |
kernel.c
|
Added CPU_COLDFIRE define - one step closer to iAudio-port
|
2005-07-18 12:40:29 +00:00 |
logf.c
|
|
|
Makefile
|
|
|
mp3_playback.c
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
mp3data.c
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
mpeg.c
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
panic.c
|
Added CPU_COLDFIRE define - one step closer to iAudio-port
|
2005-07-18 12:40:29 +00:00 |
pcm_playback.c
|
Major peakmeter rework: * Changed set/get functions for dbfs mode to bool type. * Removed performance setting, leaving (slightly adapted) high performance mode only. * Refresh rate is always 20 Hz now. * Readout doesn't do an extra (hidden) peek, should allow for slightly better clip detection. * Brought back high performance peakmeter for recording. Peakmeter stops hogging the CPU when the disk is spinning; this is enough to avoid the performance problem when saving data. * Optimisations, code cleanup and code policeing. * (iriver) Reduced CPU load of peakmeter by not calculating excessive overlaps. ** Bumped config block version, so save your settings before upgrading.
|
2005-08-29 20:07:17 +00:00 |
pcm_record.c
|
Add pcm_set_mux() for switching between FM radio and Line input
|
2005-08-13 17:28:59 +00:00 |
powermgmt.c
|
typos fixed...
|
2005-08-06 10:30:37 +00:00 |
README
|
|
|
replaygain.c
|
Added pre-amp setting for files with ReplayGain information.
|
2005-08-11 18:56:20 +00:00 |
rolo.c
|
Fixed RoLo for H100 targets
|
2005-07-18 15:50:06 +00:00 |
rom.lds
|
allow the flash plugin to verify the RomBox link address
|
2005-08-23 07:26:40 +00:00 |
sound.c
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
SOURCES
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
system.c
|
iriver: Moved the I2C prescaler setting to i2c_init(), and removed it from set_cpu_frequency(). The Coldfire I2C controller can't handle on-the-fly prescaler changes. Also removed the unnecessary slave address setting in i2c_init.
|
2005-08-11 19:00:55 +00:00 |
thread.c
|
SH1: Tiny optimisation of the thread scheduler.
|
2005-08-26 22:52:31 +00:00 |
timer.c
|
Moved implementation of user timer to the firmware layer, implemented it for iriver, and made it shareable based on priorities. On iriver, the user timer is shared between the backlight fading and other use, so if a plugin registers the timer, the backlight will resort to simple on/off switching until the plugin releases the timer again. Sorted and bumped the plugin api.
|
2005-07-26 20:01:11 +00:00 |
tuner_philips.c
|
Ooops, didn't mean to commit that
|
2005-08-24 09:15:13 +00:00 |
tuner_samsung.c
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
usb.c
|
Trying to enter STANDBY mode when entering USB mode seems to cause more trouble than it is worth.
|
2005-08-22 13:27:56 +00:00 |