Nicolas Pennequin e2f5f21e5b Give the Gigabeat S bootloader the ability to untar a tarball. ... To test a build, use 'make tar' and send the tar to the unit. The bootloader will unarchive it and delete it before loading the main binary. This is a temporary hack to make testing possible until we have a better way of sending a complete build. Also enable writing to the disk by disabling the optimised write stubs. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16338 a1c6a512-1295-4272-9138-f99709370657		2008-02-17 23:17:08 +00:00
..
common.c	Sansa C200 bootloader works fine, no need to be verbose anymore	2007-09-20 12:11:04 +00:00
common.h	In preparation for use with sansapatcher, change portalplayer bootloaders to read firmwares in mi4 format.	2007-03-16 14:28:00 +00:00
FILES	Initial check-in of work-in-progress iPod bootloader. Current targets are iPod Color/Photo and iPod Nano.	2005-11-08 00:52:39 +00:00
gigabeat-s.c	Give the Gigabeat S bootloader the ability to untar a tarball.	2008-02-17 23:17:08 +00:00
gigabeat.c	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
iaudio_x5.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
ipod.c	Fix iPod Nano & Video bootloaders. Backlight uses sleep(), hence it must be initialised after kernel_init().	2007-11-21 21:28:46 +00:00
iriver_h300.c	* dont compile audio codec drivers for bootloader, as we dont need them -> saves time	2007-11-20 12:09:59 +00:00
main-e200r-installer.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
main-pp.c	Major USB fixes by Frank Gevaerts. Still disabled in builds, #define USE_ROCKBOX_USB to test.	2008-02-11 14:26:25 +00:00
main.c	Prepare for a new bootloader 7-pre4 release for iriver H100 series. Synced to work properly with SVN, and hopefully fixed remote detection problem and audio thump for some users. Also pure H100/H115 should be supported now. Actual bootloaders will be released separately.	2008-02-09 15:06:09 +00:00
Makefile	Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written.	2007-09-09 11:20:20 +00:00
mrobe500.c	Show some more registers in the debug screen, fix the touchscreen when SCREEN_ROTATE is set.	2007-11-11 03:31:24 +00:00
SOURCES	Initial Cowon D2 commit:	2008-01-14 22:04:48 +00:00
telechips.c	Shutdown needs about 2 seconds, but it seems to work :)	2008-02-16 12:44:15 +00:00
tpj1022.c	FS#6554 - Move bootloader code into a common file	2007-02-22 15:09:49 +00:00