Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/bootloader/main.c

551 lines
12 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2005 by Linus Nielsen Feltzing
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include <stdlib.h>
#include <stdio.h>
#include "inttypes.h"
#include "string.h"
#include "cpu.h"
#include "system.h"
#include "lcd.h"
#include "kernel.h"
#include "thread.h"
#include "ata.h"
#include "usb.h"
#include "disk.h"
#include "font.h"
#include "adc.h"
#include "backlight.h"
#include "button.h"
#include "panic.h"
#include "power.h"
#include "file.h"
#include "uda1380.h"
#include "eeprom_settings.h"
#include "pcf50606.h"
#include <stdarg.h>
#define DRAM_START 0x31000000
int line = 0;
int usb_screen(void)
{
return 0;
}
char version[] = APPSVERSION;
char printfbuf[256];
void printf(const char *format, ...)
{
int len;
unsigned char *ptr;
va_list ap;
va_start(ap, format);
ptr = printfbuf;
len = vsnprintf(ptr, sizeof(printfbuf), format, ap);
va_end(ap);
lcd_puts(0, line++, ptr);
lcd_update();
if(line >= 16)
line = 0;
}
void start_iriver_fw(void)
{
asm(" move.w #0x2700,%sr");
/* Reset the cookie for the crt0 crash check */
asm(" move.l #0,%d0");
asm(" move.l %d0,0x10017ffc");
asm(" movec.l %d0,%vbr");
asm(" move.l 0,%sp");
asm(" lea.l 8,%a0");
asm(" jmp (%a0)");
}
int load_firmware(void)
{
int fd;
int rc;
int len;
unsigned long chksum;
char model[5];
unsigned long sum;
int i;
unsigned char *buf = (unsigned char *)DRAM_START;
fd = open("/.rockbox/" BOOTFILE, O_RDONLY);
if(fd < 0)
{
fd = open("/" BOOTFILE, O_RDONLY);
if(fd < 0)
return -1;
}
len = filesize(fd) - 8;
printf("Length: %x", len);
lcd_update();
lseek(fd, FIRMWARE_OFFSET_FILE_CRC, SEEK_SET);
rc = read(fd, &chksum, 4);
if(rc < 4)
return -2;
printf("Checksum: %x", chksum);
lcd_update();
rc = read(fd, model, 4);
if(rc < 4)
return -3;
model[4] = 0;
printf("Model name: %s", model);
lcd_update();
lseek(fd, FIRMWARE_OFFSET_FILE_DATA, SEEK_SET);
rc = read(fd, buf, len);
if(rc < len)
return -4;
close(fd);
sum = MODEL_NUMBER;
for(i = 0;i < len;i++) {
sum += buf[i];
}
printf("Sum: %x", sum);
lcd_update();
if(sum != chksum)
return -5;
return 0;
}
int load_flashed_rockbox(void)
{
struct flash_header hdr;
unsigned char *buf = (unsigned char *)DRAM_START;
uint8_t *src = (uint8_t *)FLASH_ENTRYPOINT;
cpu_boost(true);
memcpy(&hdr, src, sizeof(struct flash_header));
src += sizeof(struct flash_header);
memcpy(buf, src, hdr.length);
cpu_boost(false);
return 0;
}
void start_firmware(void)
{
asm(" move.w #0x2700,%sr");
/* Reset the cookie for the crt0 crash check */
asm(" move.l #0,%d0");
asm(" move.l %d0,0x10017ffc");
asm(" move.l %0,%%d0" :: "i"(DRAM_START));
asm(" movec.l %d0,%vbr");
asm(" move.l %0,%%sp" :: "m"(*(int *)DRAM_START));
asm(" move.l %0,%%a0" :: "m"(*(int *)(DRAM_START+4)));
asm(" jmp (%a0)");
}
void main(void)
{
int i;
int rc;
bool rc_on_button = false;
bool on_button = false;
bool rec_button = false;
int data;
int adc_battery, battery_voltage, batt_int, batt_frac;
#ifdef IAUDIO_X5
(void)rc_on_button;
(void)on_button;
(void)rec_button;
(void)data;
power_init();
system_init();
kernel_init();
set_cpu_frequency(CPUFREQ_NORMAL);
coldfire_set_pllcr_audio_bits(DEFAULT_PLLCR_AUDIO_BITS);
set_irq_level(0);
lcd_init();
backlight_init();
font_init();
adc_init();
button_init();
printf("Rockbox boot loader");
printf("Version %s", version);
lcd_update();
adc_battery = adc_read(ADC_BATTERY);
battery_voltage = (adc_battery * BATTERY_SCALE_FACTOR) / 10000;
batt_int = battery_voltage / 100;
batt_frac = battery_voltage % 100;
printf("Batt: %d.%02dV", batt_int, batt_frac);
lcd_update();
rc = ata_init();
if(rc)
{
printf("ATA error: %d", rc);
sleep(HZ*5);
power_off();
}
disk_init();
rc = disk_mount_all();
if (rc<=0)
{
printf("No partition found");
sleep(HZ*5);
power_off();
}
printf("Loading firmware");
lcd_update();
i = load_firmware();
printf("Result: %d", i);
lcd_update();
if(i == 0)
start_firmware();
power_off();
#else
/* We want to read the buttons as early as possible, before the user
releases the ON button */
/* Set GPIO33, GPIO37, GPIO38 and GPIO52 as general purpose inputs
(The ON and Hold buttons on the main unit and the remote) */
or_l(0x00100062, &GPIO1_FUNCTION);
and_l(~0x00100062, &GPIO1_ENABLE);
data = GPIO1_READ;
if ((data & 0x20) == 0)
on_button = true;
if ((data & 0x40) == 0)
rc_on_button = true;
/* Set the default state of the hard drive power to OFF */
ide_power_enable(false);
power_init();
/* Turn off if neither ON button is pressed */
if(!(on_button || rc_on_button || usb_detect()))
power_off();
/* Backlight ON */
or_l(0x00020000, &GPIO1_ENABLE);
or_l(0x00020000, &GPIO1_FUNCTION);
and_l(~0x00020000, &GPIO1_OUT);
/* Remote backlight ON */
#ifdef HAVE_REMOTE_LCD
#ifdef IRIVER_H300_SERIES
or_l(0x00000002, &GPIO1_ENABLE);
and_l(~0x00000002, &GPIO1_OUT);
#else
or_l(0x00000800, &GPIO_ENABLE);
or_l(0x00000800, &GPIO_FUNCTION);
and_l(~0x00000800, &GPIO_OUT);
#endif
#endif
/* Power on the hard drive early, to speed up the loading.
Some H300 don't like this, so we only do it for the H100 */
#ifndef IRIVER_H300_SERIES
if(!((on_button && button_hold()) ||
(rc_on_button && remote_button_hold()))) {
ide_power_enable(true);
}
#endif
system_init();
kernel_init();
#ifdef HAVE_ADJUSTABLE_CPU_FREQ
/* Set up waitstates for the peripherals */
set_cpu_frequency(0); /* PLL off */
#ifdef CPU_COLDFIRE
coldfire_set_pllcr_audio_bits(DEFAULT_PLLCR_AUDIO_BITS);
#endif
#endif
#ifdef HAVE_UDA1380
uda1380_reset();
#endif
backlight_init();
set_irq_level(0);
lcd_init();
font_init();
adc_init();
button_init();
lcd_setfont(FONT_SYSFIXED);
printf("Rockbox boot loader");
printf("Version %s", version);
lcd_update();
sleep(HZ/50); /* Allow the button driver to check the buttons */
rec_button = ((button_status() & BUTTON_REC) == BUTTON_REC)
|| ((button_status() & BUTTON_RC_REC) == BUTTON_RC_REC);
/* Don't start if the Hold button is active on the device you
are starting with */
if (!usb_detect() && ((on_button && button_hold()) ||
(rc_on_button && remote_button_hold())))
{
printf("HOLD switch on, power off...");
lcd_update();
sleep(HZ*2);
/* Backlight OFF */
#ifdef HAVE_REMOTE_LCD
#ifdef IRIVER_H300_SERIES
or_l(0x00000002, &GPIO1_OUT);
#else
or_l(0x00000800, &GPIO_OUT);
#endif
#endif
/* Reset the cookie for the crt0 crash check */
asm(" move.l #0,%d0");
asm(" move.l %d0,0x10017ffc");
power_off();
}
#ifdef HAVE_EEPROM_SETTINGS
firmware_settings.initialized = false;
#endif
if (detect_flashed_rockbox())
{
bool load_from_flash;
load_from_flash = !rec_button;
#ifdef HAVE_EEPROM_SETTINGS
if (eeprom_settings_init())
{
/* If bootloader version has not been reset, disk might
* not be intact. */
if (firmware_settings.bl_version)
firmware_settings.disk_clean = false;
firmware_settings.bl_version = 7;
/* Invert the record button if we want to load from disk
* by default. */
if (firmware_settings.boot_disk)
load_from_flash = rec_button;
}
#endif
if (load_from_flash)
{
/* Load firmware from flash */
i = load_flashed_rockbox();
printf("Result: %d", i);
lcd_update();
if (i == 0)
{
#ifdef HAVE_EEPROM_SETTINGS
eeprom_settings_store();
#endif
start_firmware();
printf("Fatal: Corrupted firmware");
printf("Hold down REC on next boot");
lcd_update();
sleep(HZ*2);
power_off();
}
}
printf("Loading from disk...");
lcd_update();
}
else
{
/* Holding REC while starting runs the original firmware */
if (rec_button)
{
printf("Starting original firmware...");
lcd_update();
start_iriver_fw();
}
}
usb_init();
adc_battery = adc_read(ADC_BATTERY);
battery_voltage = (adc_battery * BATTERY_SCALE_FACTOR) / 10000;
batt_int = battery_voltage / 100;
batt_frac = battery_voltage % 100;
printf("Batt: %d.%02dV", batt_int, batt_frac);
lcd_update();
if(battery_voltage <= 300) {
printf("WARNING! BATTERY LOW!!");
lcd_update();
sleep(HZ*2);
}
rc = ata_init();
if(rc)
{
lcd_clear_display();
printf("ATA error: %d", rc);
printf("Insert USB cable and press");
printf("a button");
lcd_update();
while(!(button_get(true) & BUTTON_REL));
}
/* A hack to enter USB mode without using the USB thread */
if(usb_detect())
{
const char msg[] = "Bootloader USB mode";
int w, h;
font_getstringsize(msg, &w, &h, FONT_SYSFIXED);
lcd_clear_display();
lcd_putsxy((LCD_WIDTH-w)/2, (LCD_HEIGHT-h)/2, msg);
lcd_update();
#ifdef IRIVER_H300_SERIES
sleep(HZ);
#endif
#ifdef HAVE_EEPROM_SETTINGS
if (firmware_settings.initialized)
{
firmware_settings.disk_clean = false;
eeprom_settings_store();
}
#endif
ata_spin();
ata_enable(false);
usb_enable(true);
cpu_idle_mode(true);
while(usb_detect())
{
ata_spin(); /* Prevent the drive from spinning down */
sleep(HZ);
/* Backlight OFF */
or_l(0x00020000, &GPIO1_OUT);
}
cpu_idle_mode(false);
usb_enable(false);
ata_init(); /* Reinitialize ATA and continue booting */
lcd_clear_display();
line = 0;
lcd_update();
}
disk_init();
rc = disk_mount_all();
if (rc<=0)
{
lcd_clear_display();
printf("No partition found");
lcd_update();
while(button_get(true) != SYS_USB_CONNECTED) {};
}
printf("Loading firmware");
lcd_update();
i = load_firmware();
printf("Result: %d", i);
lcd_update();
#ifdef HAVE_EEPROM_SETTINGS
if (firmware_settings.initialized)
eeprom_settings_store();
#endif
if (i == 0)
start_firmware();
if (detect_flashed_rockbox())
{
printf("No firmware found on disk");
printf("Powering off...");
lcd_update();
ata_sleep();
sleep(HZ*4);
power_off();
}
else
start_iriver_fw();
#endif /* IAUDIO_X5 */
}
/* These functions are present in the firmware library, but we reimplement
them here because the originals do a lot more than we want */
void reset_poweroff_timer(void)
{
}
void screen_dump(void)
{
}
int dbg_ports(void)
{
return 0;
}
void mpeg_stop(void)
{
}
void sys_poweroff(void)
{
}
Reference in a new issue View git blame Copy permalink