Jens Arnold feb5b15e9b All-new greyscale library, replacing the old one. Features: (1) Drawing/updating is faster than the old grayscale lib at full depth. (2) Always 129 shades instead of 2..33 shades. (3) No graininess caused by frequent updates (mpegplayer, doom, ...). (4) Needs less memory than the old grayscale lib at full depth. * The tradeoff is slightly higher CPU load in the ISR (frames are calculated 'live') and an extra function in the core. * Ported all plugins which used the graylib to use the new one. * Some slight optimisations for archos and H1x0 LCD update. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15998 a1c6a512-1295-4272-9138-f99709370657		2008-01-04 23:42:38 +00:00
..
adc-h100.c	Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :>	2007-10-17 20:45:13 +00:00
adc-target.h
backlight-h100.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
backlight-target.h	Fix bootloaders, and the backlight-modded Ondio build.	2007-11-12 19:19:38 +00:00
button-h100.c
lcd-as-h100.S	All-new greyscale library, replacing the old one. Features: (1) Drawing/updating is faster than the old grayscale lib at full depth. (2) Always 129 shades instead of 2..33 shades. (3) No graininess caused by frequent updates (mpegplayer, doom, ...). (4) Needs less memory than the old grayscale lib at full depth. * The tradeoff is slightly higher CPU load in the ISR (frames are calculated 'live') and an extra function in the core. * Ported all plugins which used the graylib to use the new one. * Some slight optimisations for archos and H1x0 LCD update.	2008-01-04 23:42:38 +00:00
lcd-h100.c	All-new greyscale library, replacing the old one. Features: (1) Drawing/updating is faster than the old grayscale lib at full depth. (2) Always 129 shades instead of 2..33 shades. (3) No graininess caused by frequent updates (mpegplayer, doom, ...). (4) Needs less memory than the old grayscale lib at full depth. * The tradeoff is slightly higher CPU load in the ISR (frames are calculated 'live') and an extra function in the core. * Ported all plugins which used the graylib to use the new one. * Some slight optimisations for archos and H1x0 LCD update.	2008-01-04 23:42:38 +00:00
power-h100.c	Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.	2007-08-14 22:06:23 +00:00
powermgmt-h100.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
spdif-h100.c
sw_i2c-h100.c
usb-h100.c	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00