rockbox/firmware/target/arm/as3525
Rafaël Carré 7478cfcbf7 Sansa as3525v2: move SD embryo code to a common dir
Select it based on as3535/as3525v2 so Clip+/Fuzev2 will be able to use
it too

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24222 a1c6a512-1295-4272-9138-f99709370657
2010-01-13 06:44:45 +00:00
..
sansa-c200v2 Fix svn:keywords property in as3525 target tree 2010-01-10 14:53:53 +00:00
sansa-clip Clivp2: Fix typo when applying FS#10047 2010-01-08 08:11:50 +00:00
sansa-clipv2 Sansa as3525v2: move SD embryo code to a common dir 2010-01-13 06:44:45 +00:00
sansa-e200v2 Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now). 2010-01-07 22:21:41 +00:00
sansa-fuze Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now). 2010-01-07 22:21:41 +00:00
sansa-m200v4
adc-target.h
app.lds FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up 2009-06-08 23:05:33 +00:00
ascodec-as3525.c
ascodec-target.h
ata_sd-as3535v2.c Sansa as3525v2: move SD embryo code to a common dir 2010-01-13 06:44:45 +00:00
ata_sd_as3525.c SansaAMS: Disable voltage scaling. 2010-01-12 23:56:59 +00:00
audio-as3525.c Sansa AMS recording support (Microphone and FM) 2009-11-01 22:51:31 +00:00
backlight-e200v2-fuze.c
boot.lds FS#10047 : Clipv2 2009-12-31 19:15:20 +00:00
button-e200v2-fuze.c Sansa AMS: refactor DBOP button reading (e200v2/Fuze/c200v2) 2010-01-06 23:41:36 +00:00
clock-target.h Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% instead 0.15% error) 2010-01-10 14:24:45 +00:00
dbop-as3525.c Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now). 2010-01-07 22:21:41 +00:00
dbop-as3525.h Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now). 2010-01-07 22:21:41 +00:00
debug-as3525.c Sansa AMS: refactor DBOP button reading (e200v2/Fuze/c200v2) 2010-01-06 23:41:36 +00:00
debug-target.h
dma-pl081.c Sansa AMS: VIC_INT_ENABLE register is not a mask 2009-11-24 12:05:53 +00:00
dma-target.h
fmradio-i2c-as3525.c FS#10047 : Clipv2 2009-12-31 19:15:20 +00:00
i2s-as3525.c
kernel-as3525.c Sansa AMS: VIC_INT_ENABLE register is not a mask 2009-11-24 12:05:53 +00:00
lcd-as-e200v2-fuze.S Sansa e200v2/Fuze: Optimize YUV blitting by writing 2 pixel at once to the DBOP and removing a few unneeded busy polling status register for fifo empty. Speed up between 50% and 80%. 2010-01-08 16:41:36 +00:00
pcm-as3525.c Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% instead 0.15% error) 2010-01-10 14:24:45 +00:00
power-as3525.c
powermgmt-as3525.c
powermgmt-target.h FS#10047 : Clipv2 2009-12-31 19:15:20 +00:00
system-as3525.c SansaAMS: Disable voltage scaling. 2010-01-12 23:56:59 +00:00
system-target.h
timer-as3525.c Sansa AMS: VIC_INT_ENABLE register is not a mask 2009-11-24 12:05:53 +00:00
usb-as3525.c Sansa Fuze & e200v2 : do not enable USBSTACK in the bootloader 2009-10-15 10:23:18 +00:00
usb-drv-as3525.c Sansa AMS: VIC_INT_ENABLE register is not a mask 2009-11-24 12:05:53 +00:00