| .. |
|
sansa-c200v2
|
Sansa c200v2: enable battery charging
|
2010-01-17 14:19:31 +00:00 |
|
sansa-clip
|
Clip+: LCD display (with FlynDice help)
|
2010-02-17 18:43:13 +00:00 |
|
sansa-clipplus
|
Clip+: greylib
|
2010-02-22 10:35:51 +00:00 |
|
sansa-clipv2
|
Sansa as3525v2: move SD embryo code to a common dir
|
2010-01-13 06:44:45 +00:00 |
|
sansa-e200v2
|
Update on even pixel boundaries on the e200v2 for best performance (was forgotten in r24198).
|
2010-01-26 21:31:53 +00:00 |
|
sansa-fuze
|
Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).
|
2010-01-07 22:21:41 +00:00 |
|
sansa-fuzev2
|
Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested.
|
2010-02-25 13:26:46 +00:00 |
|
sansa-m200v4
|
|
|
|
adc-target.h
|
|
|
|
app.lds
|
Fix as3525 lowmem targets. They put the init code into the plugin buffer, but some init functions are grabbing it.
|
2010-03-04 12:32:12 +00:00 |
|
ascodec-as3525.c
|
|
|
|
ascodec-target.h
|
|
|
|
audio-as3525.c
|
as3525: do not assume we can record from microphone
|
2010-03-15 01:00:00 +00:00 |
|
backlight-e200v2-fuze.c
|
|
|
|
boot.lds
|
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
|
2010-03-08 23:16:57 +00:00 |
|
button-e200v2-fuze.c
|
Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested.
|
2010-02-25 13:26:46 +00:00 |
|
clock-target.h
|
as3525v2: share more of system_init() between the 2 SoCs
|
2010-02-23 06:59:58 +00:00 |
|
dbop-as3525.c
|
Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested.
|
2010-02-25 13:26:46 +00:00 |
|
dbop-as3525.h
|
Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).
|
2010-01-07 22:21:41 +00:00 |
|
debug-as3525.c
|
SansaAMS: debug-as3525.c Allow View HW info page to display correct info for both V1 & V2 versions of as3525.
|
2010-03-11 19:01:49 +00:00 |
|
debug-target.h
|
|
|
|
dma-pl081.c
|
Sansa AMS: VIC_INT_ENABLE register is not a mask
|
2009-11-24 12:05:53 +00:00 |
|
dma-target.h
|
Add DMA line for SSP as used in Clip+
|
2010-02-08 08:13:52 +00:00 |
|
fmradio-i2c-as3525.c
|
Clip+: si4702 FM
|
2010-03-15 00:36:13 +00:00 |
|
i2s-as3525.c
|
|
|
|
kernel-as3525.c
|
Sansa AMS: VIC_INT_ENABLE register is not a mask
|
2009-11-24 12:05:53 +00:00 |
|
lcd-as-e200v2-fuze.S
|
Sansa e200v2/Fuze: Optimize YUV blitting by writing 2 pixel at once to the DBOP and removing a few unneeded busy polling status register for fifo empty. Speed up between 50% and 80%.
|
2010-01-08 16:41:36 +00:00 |
|
pcm-as3525.c
|
Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% instead 0.15% error)
|
2010-01-10 14:24:45 +00:00 |
|
power-as3525.c
|
Sansa AMS: do not pretend we can power off the tuner
|
2010-03-05 01:43:47 +00:00 |
|
powermgmt-as3525.c
|
|
|
|
powermgmt-target.h
|
Make Clip+ bootloader build
|
2010-02-05 12:40:25 +00:00 |
|
sd-as3525.c
|
sd-as3525: do not reverse 2 times long responses, read them directly in the needed order
|
2010-03-14 21:46:25 +00:00 |
|
sd-as3525v2.c
|
sd-as3525v2: prepare for multidrive builds
|
2010-03-15 01:57:15 +00:00 |
|
system-as3525.c
|
Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested.
|
2010-02-25 13:26:46 +00:00 |
|
system-target.h
|
|
|
|
timer-as3525.c
|
Sansa AMS: VIC_INT_ENABLE register is not a mask
|
2009-11-24 12:05:53 +00:00 |
|
usb-as3525.c
|
|
|
|
usb-drv-as3525.c
|
Sansa AMS: VIC_INT_ENABLE register is not a mask
|
2009-11-24 12:05:53 +00:00 |
72e0bf3381