Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/sansaclipzip.h
Aidan MacDonald bcbb5a8b00 multiboot: Allow searching in volume 0 for redirect file 
Searching in volume 0 is necessary for multiboot targets with only
one drive, like the M3K/Q1/ErosQ. Without this the search code will
never look at the redirect file on these targets.

The search bound is configured with a setting MULTIBOOT_MIN_VOLUME,
which defaults to 0, but is defined to 1 for Sansa players so they
keep their old behavior.

Change-Id: I6dc5cf98db4258731de2c68c3ab1182b4a4a655b
2022-03-27 09:50:33 -04:00

232 lines
6.3 KiB
C
Raw Blame History

/*
* This config file is for the Sandisk Sansa Clip Zip
*/
/* For Rolo and boot loader */
#define MODEL_NUMBER 79
#define MODEL_NAME "Sandisk Sansa Zip"
#define FIRMWARE_OFFSET_FILE_DATA 8
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Define if boot data from bootloader has been enabled for the target */
#define HAVE_BOOTDATA
/* define boot redirect file name allows booting from external drives */
#define BOOT_REDIR "rockbox_main.clipzip"
#define MULTIBOOT_MIN_VOLUME 1
#define HAVE_MULTIDRIVE
#define NUM_DRIVES 2
#ifndef BOOTLOADER
#define HAVE_HOTSWAP
#define HAVE_RDS_CAP
#endif
#define HW_SAMPR_CAPS SAMPR_CAP_ALL_96
/* define this if you have recording possibility */
#define HAVE_RECORDING
#define REC_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
/* because the samplerates don't match at each point, we must be able to
* tell PCM which set of rates to use. not needed if recording rates are
* a simple subset of playback rates and are equal values. */
#define CONFIG_SAMPR_TYPES
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 96
#define LCD_HEIGHT 96
/* sqrt(96^2 + 96^2) / 1.1 = 123.4 */
#define LCD_DPI 123
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565
/* define this if you have LCD enable function */
#define HAVE_LCD_ENABLE
#ifndef BOOTLOADER
/* Define this if your LCD can be put to sleep.
* HAVE_LCD_ENABLE should be defined as well. */
//#define HAVE_LCD_SLEEP
//#define HAVE_LCD_SLEEP_SETTING
#endif
/* define this if you can flip your LCD */
//#define HAVE_LCD_FLIP
/* define this if you can invert the pixels */
//#define HAVE_LCD_INVERT
/* Define this if your LCD can set contrast */
//#define HAVE_LCD_CONTRAST
//#define MIN_CONTRAST_SETTING 0
//#define MAX_CONTRAST_SETTING 50
//#define DEFAULT_CONTRAST_SETTING 30
//#define IRAM_LCDFRAMEBUFFER IDATA_ATTR /* put the lcd frame buffer in IRAM */
#define CONFIG_KEYPAD SANSA_CLIP_PAD
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
#define HAVE_GUI_BOOST
/* There is no hardware tone control */
#define HAVE_SW_TONE_CONTROLS
/* AS3514 or newer */
#define HAVE_AS3514
#define HAVE_AS3543
#ifndef BOOTLOADER
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_AS3514
/* Define if the device can wake from an RTC alarm */
#define HAVE_RTC_ALARM
#endif
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
#define HAVE_FAT16SUPPORT
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE (0x100000-0x8000)
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
#define AB_REPEAT_ENABLE
/* FM Tuner */
#define CONFIG_TUNER SI4700 /* in fact SI4702 */
//#define HAVE_TUNER_PWR_CTRL
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
#define CONFIG_STORAGE STORAGE_SD
/* Define this if target has an additional number of threads specific to it */
#define TARGET_EXTRA_THREADS 1 /* RDS thread */
#define BATTERY_CAPACITY_DEFAULT 300 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 300 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 300 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Charging implemented in a target-specific algorithm */
#define CONFIG_CHARGING CHARGING_TARGET
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/** Non-simulator section **/
#ifndef SIMULATOR
/* Define this if you have a AMS AS3525v2 SoC */
#define CONFIG_CPU AS3525v2
/* Define this if you want to use the AS3525 i2c interface */
#define CONFIG_I2C I2C_AS3525
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* define current usage levels (based on battery bench) */
#define CURRENT_NORMAL 11
#define CURRENT_BACKLIGHT 15 /* TODO copied from clipplus */
#define CURRENT_RECORD CURRENT_NORMAL /* TODO */
/* maximum charging current */
#define CURRENT_MAX_CHG 150
/* Define this to the CPU frequency */
#define CPU_FREQ 192000000
/* Type of LCD */
#define CONFIG_LCD LCD_CLIPZIP
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_DESIGNWARE
/* logf() over USB serial (http://www.rockbox.org/wiki/PortalPlayerUsb) */
//#define USB_ENABLE_SERIAL
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x0781
#define USB_PRODUCT_ID 0x74e5
#define HAVE_BOOTLOADER_USB_MODE
/* Virtual LED (icon) */
#define CONFIG_LED LED_VIRTUAL
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
/*define this to enable CPU voltage scaling on AMS devices*/
#define HAVE_ADJUSTABLE_CPU_VOLTAGE
#define BOOTFILE_EXT "sansa"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define ICODE_ATTR_TREMOR_NOT_MDCT
#define INCLUDE_TIMEOUT_API
#endif /* SIMULATOR */
/** Port-specific settings **/
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 0
#define MAX_BRIGHTNESS_SETTING 9
#define DEFAULT_BRIGHTNESS_SETTING 6
/* Default recording levels */
#define DEFAULT_REC_MIC_GAIN 23
#define DEFAULT_REC_LEFT_GAIN 23
#define DEFAULT_REC_RIGHT_GAIN 23
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink