05a67d021c
This patch adds a configurable line separator between list items, very similar to lists in Android. Additionally, below the list item there is a thicker line. It can be disabled in the settings. Its color can be configured as well. Remote and monochrome displays are explicitly unsupported. If there is desire this can be changed but it doesn't seem useful to me. Change-Id: I005313b0d8f5ecd15864bf20e66ea4e3390d8b7d
548 lines
19 KiB
C
548 lines
19 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2002 by Alan Korr
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __LCD_H__
|
|
#define __LCD_H__
|
|
|
|
#include <stdbool.h>
|
|
#include "cpu.h"
|
|
#include "config.h"
|
|
#include "events.h"
|
|
|
|
#define VP_FLAG_ALIGN_RIGHT 0x01
|
|
#define VP_FLAG_ALIGN_CENTER 0x02
|
|
|
|
#define VP_FLAG_ALIGNMENT_MASK \
|
|
(VP_FLAG_ALIGN_RIGHT|VP_FLAG_ALIGN_CENTER)
|
|
|
|
#define VP_IS_RTL(vp) (((vp)->flags & VP_FLAG_ALIGNMENT_MASK) == VP_FLAG_ALIGN_RIGHT)
|
|
|
|
struct viewport {
|
|
int x;
|
|
int y;
|
|
int width;
|
|
int height;
|
|
#ifdef HAVE_LCD_BITMAP
|
|
int flags;
|
|
int font;
|
|
int drawmode;
|
|
/* needed for even for mono displays to support greylib */
|
|
unsigned fg_pattern;
|
|
unsigned bg_pattern;
|
|
#endif
|
|
};
|
|
|
|
/* Frame buffer stride
|
|
*
|
|
* Stride describes the amount that you need to increment to get to the next
|
|
* line. For screens that have the pixels in contiguous horizontal strips
|
|
* stride should be equal to the image width.
|
|
*
|
|
* For example, if the screen pixels are layed out as follows:
|
|
*
|
|
* width0 width1 width2 widthX-1
|
|
* ------ ------ ------ ------------------ --------
|
|
* height0 | pixel0 pixel1 pixel2 ----------------> pixelX-1
|
|
* height1 | pixelX
|
|
*
|
|
* then you need to add X pixels to get to the next line. (the next line
|
|
* in this case is height1).
|
|
*
|
|
* Similarly, if the screen has the pixels in contiguous vertical strips
|
|
* the stride would be equal to the image height.
|
|
*
|
|
* For example if the screen pixels are layed out as follows:
|
|
*
|
|
* width0 width1
|
|
* ------ ------
|
|
* height0 | pixel0 pixelY
|
|
* height1 | pixel1
|
|
* height2 | pixel2
|
|
* | | |
|
|
* \|/ | \|/
|
|
* heightY-1 | pixelY-1
|
|
*
|
|
* then you would need to add Y pixels to get to the next line (the next
|
|
* line in this case is from width0 to width1).
|
|
*
|
|
* The remote might have a different stride than the main screen so the screen
|
|
* number needs to be passed to the STRIDE macro so that the appropriate height
|
|
* or width can be passed to the lcd_bitmap, or lcd_remote_bitmap calls.
|
|
*
|
|
* STRIDE_REMOTE and STRIDE_MAIN should never be used when it is not clear whether
|
|
* lcd_remote_bitmap calls or lcd_bitmap calls are being made (for example the
|
|
* screens api).
|
|
*
|
|
* Screen should always use the screen_type enum that is at the top of this
|
|
* header.
|
|
*/
|
|
enum screen_type {
|
|
SCREEN_MAIN
|
|
#ifdef HAVE_REMOTE_LCD
|
|
,SCREEN_REMOTE
|
|
#endif
|
|
};
|
|
|
|
struct scrollinfo;
|
|
|
|
#if defined(LCD_STRIDEFORMAT) && LCD_STRIDEFORMAT == VERTICAL_STRIDE
|
|
#define STRIDE_MAIN(w, h) (h)
|
|
#else
|
|
#define STRIDE_MAIN(w, h) (w)
|
|
#endif
|
|
|
|
#define STRIDE_REMOTE(w, h) (w)
|
|
|
|
#define STRIDE(screen, w, h) (screen==SCREEN_MAIN?STRIDE_MAIN((w), \
|
|
(h)):STRIDE_REMOTE((w),(h)))
|
|
|
|
#ifdef HAVE_LCD_BITMAP
|
|
#if LCD_DEPTH <=8
|
|
#if (LCD_PIXELFORMAT == VERTICAL_INTERLEAVED) \
|
|
|| (LCD_PIXELFORMAT == HORIZONTAL_INTERLEAVED)
|
|
typedef unsigned short fb_data;
|
|
#define FB_DATA_SZ 2
|
|
#else
|
|
typedef unsigned char fb_data;
|
|
#define FB_DATA_SZ 1
|
|
#endif
|
|
#elif LCD_DEPTH <= 16
|
|
typedef unsigned short fb_data;
|
|
#define FB_DATA_SZ 2
|
|
#else /* LCD_DEPTH > 16 */
|
|
typedef unsigned long fb_data;
|
|
#define FB_DATA_SZ 4
|
|
#endif /* LCD_DEPTH */
|
|
|
|
#else /* LCD_CHARCELLS */
|
|
typedef unsigned char fb_data;
|
|
#endif
|
|
|
|
#if defined(HAVE_LCD_MODES)
|
|
void lcd_set_mode(int mode);
|
|
#define LCD_MODE_RGB565 0x00000001
|
|
#define LCD_MODE_YUV 0x00000002
|
|
#define LCD_MODE_PAL256 0x00000004
|
|
|
|
#if HAVE_LCD_MODES & LCD_MODE_PAL256
|
|
void lcd_blit_pal256(unsigned char *src, int src_x, int src_y, int x, int y,
|
|
int width, int height);
|
|
void lcd_pal256_update_pal(fb_data *palette);
|
|
#endif
|
|
#endif
|
|
|
|
|
|
/* common functions */
|
|
extern void lcd_write_command(int byte);
|
|
extern void lcd_write_command_e(int cmd, int data);
|
|
extern void lcd_write_command_ex(int cmd, int data1, int data2);
|
|
extern void lcd_write_data(const fb_data* p_bytes, int count);
|
|
extern void lcd_init(void) INIT_ATTR;
|
|
extern void lcd_init_device(void) INIT_ATTR;
|
|
|
|
extern void lcd_backlight(bool on);
|
|
extern int lcd_default_contrast(void);
|
|
extern void lcd_set_contrast(int val);
|
|
extern int lcd_getwidth(void);
|
|
extern int lcd_getheight(void);
|
|
extern int lcd_getstringsize(const unsigned char *str, int *w, int *h);
|
|
|
|
extern void lcd_set_viewport(struct viewport* vp);
|
|
extern void lcd_update(void);
|
|
extern void lcd_update_viewport(void);
|
|
extern void lcd_update_viewport_rect(int x, int y, int width, int height);
|
|
extern void lcd_clear_viewport(void);
|
|
extern void lcd_clear_display(void);
|
|
extern void lcd_putsxy(int x, int y, const unsigned char *string);
|
|
extern void lcd_putsxyf(int x, int y, const unsigned char *fmt, ...);
|
|
extern void lcd_putsxy_style_offset(int x, int y, const unsigned char *str,
|
|
int style, int offset);
|
|
extern void lcd_puts(int x, int y, const unsigned char *string);
|
|
extern void lcd_putsf(int x, int y, const unsigned char *fmt, ...);
|
|
extern void lcd_putc(int x, int y, unsigned long ucs);
|
|
extern bool lcd_puts_scroll(int x, int y, const unsigned char* string);
|
|
extern bool lcd_putsxy_scroll_func(int x, int y, const unsigned char *string,
|
|
void (*scroll_func)(struct scrollinfo *),
|
|
void *data, int x_offset);
|
|
|
|
#ifdef HAVE_LCD_BITMAP
|
|
|
|
/* performance function */
|
|
#if defined(HAVE_LCD_COLOR)
|
|
#if MEMORYSIZE > 2
|
|
#define LCD_YUV_DITHER 0x1
|
|
extern void lcd_yuv_set_options(unsigned options);
|
|
extern void lcd_blit_yuv(unsigned char * const src[3],
|
|
int src_x, int src_y, int stride,
|
|
int x, int y, int width, int height);
|
|
#endif /* MEMORYSIZE > 2 */
|
|
#else
|
|
extern void lcd_blit_mono(const unsigned char *data, int x, int by, int width,
|
|
int bheight, int stride);
|
|
extern void lcd_blit_grey_phase(unsigned char *values, unsigned char *phases,
|
|
int bx, int by, int bwidth, int bheight,
|
|
int stride);
|
|
#endif
|
|
|
|
|
|
/* update a fraction of the screen */
|
|
extern void lcd_update_rect(int x, int y, int width, int height);
|
|
|
|
#ifdef HAVE_REMOTE_LCD
|
|
extern void lcd_remote_update(void);
|
|
/* update a fraction of the screen */
|
|
extern void lcd_remote_update_rect(int x, int y, int width, int height);
|
|
#endif /* HAVE_REMOTE_LCD */
|
|
#endif /* HAVE_LCD_BITMAP */
|
|
|
|
#ifdef HAVE_LCD_CHARCELLS
|
|
|
|
/* Icon definitions for lcd_icon() */
|
|
enum
|
|
{
|
|
ICON_BATTERY = 0,
|
|
ICON_BATTERY_1,
|
|
ICON_BATTERY_2,
|
|
ICON_BATTERY_3,
|
|
ICON_USB,
|
|
ICON_PLAY,
|
|
ICON_RECORD,
|
|
ICON_PAUSE,
|
|
ICON_AUDIO,
|
|
ICON_REPEAT,
|
|
ICON_1,
|
|
ICON_VOLUME,
|
|
ICON_VOLUME_1,
|
|
ICON_VOLUME_2,
|
|
ICON_VOLUME_3,
|
|
ICON_VOLUME_4,
|
|
ICON_VOLUME_5,
|
|
ICON_PARAM
|
|
};
|
|
|
|
void lcd_icon(int icon, bool enable);
|
|
void lcd_double_height(bool on);
|
|
void lcd_define_pattern(unsigned long ucs, const char *pattern);
|
|
unsigned long lcd_get_locked_pattern(void);
|
|
void lcd_unlock_pattern(unsigned long ucs);
|
|
void lcd_put_cursor(int x, int y, unsigned long cursor_ucs);
|
|
void lcd_remove_cursor(void);
|
|
#define JUMP_SCROLL_ALWAYS 5
|
|
extern void lcd_jump_scroll(int mode); /* 0=off, 1=once, ..., ALWAYS */
|
|
extern void lcd_jump_scroll_delay(int ms);
|
|
#endif /* HAVE_LCD_CHARCELLS */
|
|
|
|
/* Bitmap formats */
|
|
enum
|
|
{
|
|
FORMAT_MONO,
|
|
FORMAT_NATIVE,
|
|
FORMAT_ANY /* For passing to read_bmp_file() */
|
|
};
|
|
|
|
|
|
/* Draw modes */
|
|
#define DRMODE_COMPLEMENT 0
|
|
#define DRMODE_BG 1
|
|
#define DRMODE_FG 2
|
|
#define DRMODE_SOLID 3
|
|
#define DRMODE_INVERSEVID 4 /* used as bit modifier for basic modes */
|
|
/* Internal drawmode modifiers. DO NOT use with set_drawmode() */
|
|
#define DRMODE_INT_BD 8
|
|
#define DRMODE_INT_IMG 16
|
|
|
|
/* Low-level drawing function types */
|
|
typedef void lcd_pixelfunc_type(int x, int y);
|
|
typedef void lcd_blockfunc_type(fb_data *address, unsigned mask, unsigned bits);
|
|
#if LCD_DEPTH >= 8
|
|
typedef void lcd_fastpixelfunc_type(fb_data *address);
|
|
#endif
|
|
|
|
#ifdef HAVE_LCD_BITMAP
|
|
|
|
#if defined(HAVE_LCD_COLOR) && defined(LCD_REMOTE_DEPTH) && \
|
|
LCD_REMOTE_DEPTH > 1
|
|
/* Just return color for screens use */
|
|
static inline unsigned lcd_color_to_native(unsigned color)
|
|
{ return color; }
|
|
#define SCREEN_COLOR_TO_NATIVE(screen, color) (screen)->color_to_native(color)
|
|
#else
|
|
#define SCREEN_COLOR_TO_NATIVE(screen, color) (color)
|
|
#endif
|
|
|
|
#ifdef HAVE_LCD_COLOR
|
|
#if LCD_PIXELFORMAT == RGB565 || LCD_PIXELFORMAT == RGB565SWAPPED
|
|
#define LCD_MAX_RED 31
|
|
#define LCD_MAX_GREEN 63
|
|
#define LCD_MAX_BLUE 31
|
|
#define LCD_RED_BITS 5
|
|
#define LCD_GREEN_BITS 6
|
|
#define LCD_BLUE_BITS 5
|
|
|
|
/* pack/unpack native RGB values */
|
|
#define _RGBPACK_LCD(r, g, b) ( ((r) << 11) | ((g) << 5) | (b) )
|
|
#define _RGB_UNPACK_RED_LCD(x) ( (((x) >> 11) ) )
|
|
#define _RGB_UNPACK_GREEN_LCD(x) ( (((x) >> 5) & 0x3f) )
|
|
#define _RGB_UNPACK_BLUE_LCD(x) ( (((x) ) & 0x1f) )
|
|
|
|
/* pack/unpack 24-bit RGB values */
|
|
#define _RGBPACK(r, g, b) _RGBPACK_LCD((r) >> 3, (g) >> 2, (b) >> 3)
|
|
#define _RGB_UNPACK_RED(x) ( (((x) >> 8) & 0xf8) | (((x) >> 13) & 0x07) )
|
|
#define _RGB_UNPACK_GREEN(x) ( (((x) >> 3) & 0xfc) | (((x) >> 9) & 0x03) )
|
|
#define _RGB_UNPACK_BLUE(x) ( (((x) << 3) & 0xf8) | (((x) >> 2) & 0x07) )
|
|
|
|
#if (LCD_PIXELFORMAT == RGB565SWAPPED)
|
|
/* RGB3553 */
|
|
#define _LCD_UNSWAP_COLOR(x) swap16(x)
|
|
#define LCD_RGBPACK_LCD(r, g, b) ( (((r) << 3) ) | \
|
|
(((g) >> 3) ) | \
|
|
(((g) & 0x07) << 13) | \
|
|
(((b) << 8) ) )
|
|
#define LCD_RGBPACK(r, g, b) ( (((r) >> 3) << 3) | \
|
|
(((g) >> 5) ) | \
|
|
(((g) & 0x1c) << 11) | \
|
|
(((b) >> 3) << 8) )
|
|
/* swap color once - not currenly used in static inits */
|
|
#define _SWAPUNPACK(x, _unp_) \
|
|
({ typeof (x) _x_ = swap16(x); _unp_(_x_); })
|
|
#define RGB_UNPACK_RED(x) _SWAPUNPACK((x), _RGB_UNPACK_RED)
|
|
#define RGB_UNPACK_GREEN(x) _SWAPUNPACK((x), _RGB_UNPACK_GREEN)
|
|
#define RGB_UNPACK_BLUE(x) _SWAPUNPACK((x), _RGB_UNPACK_BLUE)
|
|
#define RGB_UNPACK_RED_LCD(x) _SWAPUNPACK((x), _RGB_UNPACK_RED_LCD)
|
|
#define RGB_UNPACK_GREEN_LCD(x) _SWAPUNPACK((x), _RGB_UNPACK_GREEN_LCD)
|
|
#define RGB_UNPACK_BLUE_LCD(x) _SWAPUNPACK((x), _RGB_UNPACK_BLUE_LCD)
|
|
#else /* LCD_PIXELFORMAT == RGB565 */
|
|
/* RGB565 */
|
|
#define _LCD_UNSWAP_COLOR(x) (x)
|
|
#define LCD_RGBPACK(r, g, b) _RGBPACK((r), (g), (b))
|
|
#define LCD_RGBPACK_LCD(r, g, b) _RGBPACK_LCD((r), (g), (b))
|
|
#define RGB_UNPACK_RED(x) _RGB_UNPACK_RED(x)
|
|
#define RGB_UNPACK_GREEN(x) _RGB_UNPACK_GREEN(x)
|
|
#define RGB_UNPACK_BLUE(x) _RGB_UNPACK_BLUE(x)
|
|
#define RGB_UNPACK_RED_LCD(x) _RGB_UNPACK_RED_LCD(x)
|
|
#define RGB_UNPACK_GREEN_LCD(x) _RGB_UNPACK_GREEN_LCD(x)
|
|
#define RGB_UNPACK_BLUE_LCD(x) _RGB_UNPACK_BLUE_LCD(x)
|
|
#endif /* RGB565* */
|
|
#else
|
|
/* other colour depths */
|
|
#endif
|
|
|
|
#define LCD_BLACK LCD_RGBPACK(0, 0, 0)
|
|
#define LCD_DARKGRAY LCD_RGBPACK(85, 85, 85)
|
|
#define LCD_LIGHTGRAY LCD_RGBPACK(170, 170, 170)
|
|
#define LCD_WHITE LCD_RGBPACK(255, 255, 255)
|
|
#define LCD_DEFAULT_FG LCD_WHITE
|
|
#define LCD_DEFAULT_BG LCD_BLACK
|
|
#define LCD_DEFAULT_LS LCD_WHITE
|
|
|
|
#elif LCD_DEPTH > 1 /* greyscale */
|
|
|
|
#define LCD_MAX_LEVEL ((1 << LCD_DEPTH) - 1)
|
|
#define LCD_BRIGHTNESS(y) (((y) * LCD_MAX_LEVEL + 127) / 255)
|
|
|
|
#define LCD_BLACK LCD_BRIGHTNESS(0)
|
|
#define LCD_DARKGRAY LCD_BRIGHTNESS(85)
|
|
#define LCD_LIGHTGRAY LCD_BRIGHTNESS(170)
|
|
#define LCD_WHITE LCD_BRIGHTNESS(255)
|
|
#define LCD_DEFAULT_FG LCD_BLACK
|
|
#define LCD_DEFAULT_BG LCD_WHITE
|
|
|
|
#endif /* HAVE_LCD_COLOR */
|
|
|
|
/* Frame buffer dimensions */
|
|
#if LCD_DEPTH == 1
|
|
#if LCD_PIXELFORMAT == HORIZONTAL_PACKING
|
|
#define LCD_FBWIDTH ((LCD_WIDTH+7)/8)
|
|
#else /* LCD_PIXELFORMAT == VERTICAL_PACKING */
|
|
#define LCD_FBHEIGHT ((LCD_HEIGHT+7)/8)
|
|
#endif /* LCD_PIXELFORMAT */
|
|
#elif LCD_DEPTH == 2
|
|
#if LCD_PIXELFORMAT == HORIZONTAL_PACKING
|
|
#define LCD_FBWIDTH ((LCD_WIDTH+3)/4)
|
|
#elif LCD_PIXELFORMAT == VERTICAL_PACKING
|
|
#define LCD_FBHEIGHT ((LCD_HEIGHT+3)/4)
|
|
#elif LCD_PIXELFORMAT == VERTICAL_INTERLEAVED
|
|
#define LCD_FBHEIGHT ((LCD_HEIGHT+7)/8)
|
|
#endif /* LCD_PIXELFORMAT */
|
|
#endif /* LCD_DEPTH */
|
|
/* Set defaults if not defined different yet. The defaults apply to both
|
|
* dimensions for LCD_DEPTH >= 8 */
|
|
#ifndef LCD_FBWIDTH
|
|
#define LCD_FBWIDTH LCD_WIDTH
|
|
#endif
|
|
#ifndef LCD_FBHEIGHT
|
|
#define LCD_FBHEIGHT LCD_HEIGHT
|
|
#endif
|
|
/* The actual framebuffer */
|
|
extern fb_data *lcd_framebuffer;
|
|
extern fb_data lcd_static_framebuffer[LCD_FBHEIGHT][LCD_FBWIDTH];
|
|
#if defined(LCD_STRIDEFORMAT) && LCD_STRIDEFORMAT == VERTICAL_STRIDE
|
|
#define FBADDR(x, y) (lcd_framebuffer + ((x) * LCD_FBHEIGHT) + (y))
|
|
#else
|
|
#define FBADDR(x, y) (lcd_framebuffer + ((y) * LCD_FBWIDTH) + (x))
|
|
#endif
|
|
#define FRAMEBUFFER_SIZE (sizeof(lcd_static_framebuffer))
|
|
|
|
/** Port-specific functions. Enable in port config file. **/
|
|
#ifdef HAVE_REMOTE_LCD_AS_MAIN
|
|
void lcd_on(void);
|
|
void lcd_off(void);
|
|
void lcd_poweroff(void);
|
|
#endif
|
|
|
|
#ifdef HAVE_LCD_ENABLE
|
|
/* Enable/disable the main display. */
|
|
extern void lcd_enable(bool on);
|
|
#endif /* HAVE_LCD_ENABLE */
|
|
|
|
#ifdef HAVE_LCD_SLEEP
|
|
/* Put the LCD into a power saving state deeper than lcd_enable(false). */
|
|
extern void lcd_sleep(void);
|
|
#endif /* HAVE_LCD_SLEEP */
|
|
#if defined(HAVE_LCD_ENABLE) || defined(HAVE_LCD_SLEEP)
|
|
/* Register a hook that is called when the lcd is powered and after the
|
|
* framebuffer data is synchronized */
|
|
/* Sansa Clip has these function in it's lcd driver, since it's the only
|
|
* 1-bit display featuring lcd_active, so far */
|
|
|
|
enum {
|
|
LCD_EVENT_ACTIVATION = (EVENT_CLASS_LCD|1),
|
|
};
|
|
|
|
extern bool lcd_active(void);
|
|
#endif
|
|
|
|
#ifdef HAVE_LCD_SHUTDOWN
|
|
extern void lcd_shutdown(void);
|
|
#endif
|
|
|
|
#define FORMAT_TRANSPARENT 0x40000000
|
|
#define FORMAT_DITHER 0x20000000
|
|
#define FORMAT_REMOTE 0x10000000
|
|
#define FORMAT_RESIZE 0x08000000
|
|
#define FORMAT_KEEP_ASPECT 0x04000000
|
|
#define FORMAT_RETURN_SIZE 0x02000000
|
|
|
|
#define TRANSPARENT_COLOR LCD_RGBPACK(255,0,255)
|
|
#define REPLACEWITHFG_COLOR LCD_RGBPACK(0,255,255)
|
|
|
|
struct bitmap {
|
|
int width;
|
|
int height;
|
|
#if (LCD_DEPTH > 1) || defined(HAVE_REMOTE_LCD) && (LCD_REMOTE_DEPTH > 1)
|
|
int format;
|
|
unsigned char *maskdata;
|
|
#endif
|
|
#ifdef HAVE_LCD_COLOR
|
|
int alpha_offset; /* byte-offset of alpha channel in data */
|
|
#endif
|
|
unsigned char *data;
|
|
};
|
|
|
|
extern void lcd_set_invert_display(bool yesno);
|
|
#ifdef HAVE_BACKLIGHT_INVERSION
|
|
extern void lcd_set_backlight_inversion(bool yesno);
|
|
#endif /* HAVE_BACKLIGHT_INVERSION */
|
|
extern void lcd_set_flip(bool yesno);
|
|
|
|
extern void lcd_set_drawmode(int mode);
|
|
extern int lcd_get_drawmode(void);
|
|
extern void lcd_setfont(int font);
|
|
extern int lcd_getfont(void);
|
|
|
|
/* low level drawing function pointer arrays */
|
|
#if LCD_DEPTH >= 8
|
|
extern lcd_fastpixelfunc_type* const *lcd_fastpixelfuncs;
|
|
#elif LCD_DEPTH > 1
|
|
extern lcd_pixelfunc_type* const *lcd_pixelfuncs;
|
|
extern lcd_blockfunc_type* const *lcd_blockfuncs;
|
|
#else /* LCD_DEPTH == 1*/
|
|
extern lcd_pixelfunc_type* const lcd_pixelfuncs[8];
|
|
extern lcd_blockfunc_type* const lcd_blockfuncs[8];
|
|
#endif /* LCD_DEPTH */
|
|
|
|
extern void lcd_drawpixel(int x, int y);
|
|
extern void lcd_drawline(int x1, int y1, int x2, int y2);
|
|
extern void lcd_hline(int x1, int x2, int y);
|
|
extern void lcd_vline(int x, int y1, int y2);
|
|
extern void lcd_drawrect(int x, int y, int width, int height);
|
|
extern void lcd_fillrect(int x, int y, int width, int height);
|
|
extern void lcd_gradient_fillrect(int x, int y, int width, int height,
|
|
unsigned start_rgb, unsigned end_rgb);
|
|
extern void lcd_gradient_fillrect_part(int x, int y, int width, int height,
|
|
unsigned start_rgb, unsigned end_rgb, int src_height, int row_skip);
|
|
extern void lcd_draw_border_viewport(void);
|
|
extern void lcd_fill_viewport(void);
|
|
extern void lcd_bitmap_part(const fb_data *src, int src_x, int src_y,
|
|
int stride, int x, int y, int width, int height);
|
|
extern void lcd_bitmap(const fb_data *src, int x, int y, int width,
|
|
int height);
|
|
extern void lcd_set_framebuffer(fb_data *fb);
|
|
|
|
extern void lcd_scroll_step(int pixels);
|
|
|
|
#if LCD_DEPTH > 1
|
|
extern void lcd_set_foreground(unsigned foreground);
|
|
extern unsigned lcd_get_foreground(void);
|
|
extern void lcd_set_background(unsigned background);
|
|
extern unsigned lcd_get_background(void);
|
|
#ifdef HAVE_LCD_COLOR
|
|
extern void lcd_set_selector_start(unsigned selector);
|
|
extern void lcd_set_selector_end(unsigned selector);
|
|
extern void lcd_set_selector_text(unsigned selector_text);
|
|
#endif
|
|
extern void lcd_set_drawinfo(int mode, unsigned foreground,
|
|
unsigned background);
|
|
void lcd_set_backdrop(fb_data* backdrop);
|
|
|
|
fb_data* lcd_get_backdrop(void);
|
|
|
|
extern void lcd_mono_bitmap_part(const unsigned char *src, int src_x, int src_y,
|
|
int stride, int x, int y, int width, int height);
|
|
extern void lcd_mono_bitmap(const unsigned char *src, int x, int y, int width,
|
|
int height);
|
|
extern void lcd_bitmap_transparent_part(const fb_data *src,
|
|
int src_x, int src_y,
|
|
int stride, int x, int y, int width,
|
|
int height);
|
|
extern void lcd_bitmap_transparent(const fb_data *src, int x, int y,
|
|
int width, int height);
|
|
#else /* LCD_DEPTH == 1 */
|
|
#define lcd_mono_bitmap lcd_bitmap
|
|
#define lcd_mono_bitmap_part lcd_bitmap_part
|
|
#endif /* LCD_DEPTH */
|
|
extern void lcd_bmp_part(const struct bitmap* bm, int src_x, int src_y,
|
|
int x, int y, int width, int height);
|
|
extern void lcd_bmp(const struct bitmap* bm, int x, int y);
|
|
extern void lcd_nine_segment_bmp(const struct bitmap* bm, int x, int y,
|
|
int width, int height);
|
|
|
|
/* TODO: Impement this for remote displays if ever needed */
|
|
#if defined(LCD_DPI) && (LCD_DPI > 0)
|
|
/* returns the pixel density of the display */
|
|
static inline int lcd_get_dpi(void) { return LCD_DPI; }
|
|
#else
|
|
extern int lcd_get_dpi(void);
|
|
#endif /* LCD_DPI */
|
|
|
|
#endif /* HAVE_LCD_BITMAP */
|
|
|
|
#endif /* __LCD_H__ */
|