| .. |
|
adc.h
|
Target tree support for Iriver iFP.
|
2006-11-09 22:58:35 +00:00 |
|
arcotg_udc.h
|
No functional changes, just reorganising code:
|
2007-02-16 22:13:21 +00:00 |
|
as3514.h
|
Improved ADC driver for AS3514 (used in PP5024 - ie. Sansa e200) based off datasheet.
|
2007-03-13 01:50:13 +00:00 |
|
ata.h
|
Do the CONFIG_LED define
|
2007-02-18 05:07:19 +00:00 |
|
ata_idle_notify.h
|
dont allow the ata callbacks to be run less than once every 30s unless
|
2006-11-26 09:53:42 +00:00 |
|
ata_mmc.h
|
Ondio: Fix multivolume and hotswap for the old MMC clock circuit.
|
2005-05-22 00:42:00 +00:00 |
|
audio.h
|
Fix remaining CONFIG_TUNER checks.
|
2007-02-18 08:46:12 +00:00 |
|
backlight.h
|
Fix CONFIG_BACKLIGHT warnings.
|
2007-02-18 10:07:27 +00:00 |
|
bidi.h
|
waiting is over: initial unicode commit
|
2005-12-06 13:27:15 +00:00 |
|
bitswap.h
|
|
|
|
buffer.h
|
mp3buf renamed to audiobuf
|
2005-04-05 11:33:58 +00:00 |
|
button.h
|
Fix CONFIG_BACKLIGHT warnings.
|
2007-02-18 10:07:27 +00:00 |
|
config-e200.h
|
FS#6860 - Battery calibration for Sansa. Thanks to Matthias Wientapper.
|
2007-03-23 10:59:01 +00:00 |
|
config-fmrecorder.h
|
Add wake on alarm support for Ipods. Rename HAVE_ALARM_MOD to HAVE_ALARM_RTC since it's not always a mod. Make Ipod PCF driver keep other flags in OOCC1 that have been set instead of overwriting them.
|
2007-02-28 21:55:11 +00:00 |
|
config-gigabeat.h
|
FS#6674: HAVE_XXX souldn't be defined with a value.
|
2007-02-20 14:57:14 +00:00 |
|
config-h10.h
|
If loading rockbox.mi4 fails, then drop back to trying rockbox.h10/rockbox.e200 instead. This will allow the new bootloader to be used with older rockbox builds.
|
2007-03-17 19:07:20 +00:00 |
|
config-h10_5gb.h
|
If loading rockbox.mi4 fails, then drop back to trying rockbox.h10/rockbox.e200 instead. This will allow the new bootloader to be used with older rockbox builds.
|
2007-03-17 19:07:20 +00:00 |
|
config-h100.h
|
FS#6674: HAVE_XXX souldn't be defined with a value.
|
2007-02-20 14:57:14 +00:00 |
|
config-h120.h
|
remove runtime detection of h1x0 series RTC MOD, but leave driver code
|
2007-03-03 00:11:20 +00:00 |
|
config-h300.h
|
FS#6674: HAVE_XXX souldn't be defined with a value.
|
2007-02-20 14:57:14 +00:00 |
|
config-iaudiom5.h
|
Rename some macros to account for the recently added M5 port. No code changes.
|
2007-03-16 23:02:39 +00:00 |
|
config-iaudiox5.h
|
Rename some macros to account for the recently added M5 port. No code changes.
|
2007-03-16 23:02:39 +00:00 |
|
config-ifp7xx.h
|
PNX0101 changes:
|
2007-03-24 19:26:13 +00:00 |
|
config-ipod3g.h
|
There is no need to hide CONFIG_RTC in the bootloader - it's harmless. Fixes warnings caused by enabling HAVE_RTC_ALARM.
|
2007-03-18 21:06:19 +00:00 |
|
config-ipod4g.h
|
There is no need to hide CONFIG_RTC in the bootloader - it's harmless. Fixes warnings caused by enabling HAVE_RTC_ALARM.
|
2007-03-18 21:06:19 +00:00 |
|
config-ipodcolor.h
|
There is no need to hide CONFIG_RTC in the bootloader - it's harmless. Fixes warnings caused by enabling HAVE_RTC_ALARM.
|
2007-03-18 21:06:19 +00:00 |
|
config-ipodmini.h
|
There is no need to hide CONFIG_RTC in the bootloader - it's harmless. Fixes warnings caused by enabling HAVE_RTC_ALARM.
|
2007-03-18 21:06:19 +00:00 |
|
config-ipodmini2g.h
|
There is no need to hide CONFIG_RTC in the bootloader - it's harmless. Fixes warnings caused by enabling HAVE_RTC_ALARM.
|
2007-03-18 21:06:19 +00:00 |
|
config-ipodnano.h
|
There is no need to hide CONFIG_RTC in the bootloader - it's harmless. Fixes warnings caused by enabling HAVE_RTC_ALARM.
|
2007-03-18 21:06:19 +00:00 |
|
config-ipodvideo.h
|
There is no need to hide CONFIG_RTC in the bootloader - it's harmless. Fixes warnings caused by enabling HAVE_RTC_ALARM.
|
2007-03-18 21:06:19 +00:00 |
|
config-ondiofm.h
|
FS#6674: HAVE_XXX souldn't be defined with a value.
|
2007-02-20 14:57:14 +00:00 |
|
config-ondiosp.h
|
FS#6674: HAVE_XXX souldn't be defined with a value.
|
2007-02-20 14:57:14 +00:00 |
|
config-player.h
|
First step of charcell LCD code rework: * Make it fully unicode aware so that adding non-ISO8859-1 scripts becomes possible (limited by the LCD capabilities of course). * Make the API more similar to the bitmap LCD code's API. * Moved hardware dependent parts to target tree. * Simplified code. * Jumpscroll temporarily non-functional.
|
2007-03-26 07:52:13 +00:00 |
|
config-recorder.h
|
FS#6674: HAVE_XXX souldn't be defined with a value.
|
2007-02-20 14:57:14 +00:00 |
|
config-recorderv2.h
|
Add wake on alarm support for Ipods. Rename HAVE_ALARM_MOD to HAVE_ALARM_RTC since it's not always a mod. Make Ipod PCF driver keep other flags in OOCC1 that have been set instead of overwriting them.
|
2007-02-28 21:55:11 +00:00 |
|
config-tpj1022.h
|
FS#6674: HAVE_XXX souldn't be defined with a value.
|
2007-02-20 14:57:14 +00:00 |
|
config.h
|
FS#6860 - Battery calibration for Sansa. Thanks to Matthias Wientapper.
|
2007-03-23 10:59:01 +00:00 |
|
cpu.h
|
Removed the Gmini 120 and Gmini SP code. These ports are dead, unfortunately.
|
2006-11-10 20:26:01 +00:00 |
|
debug.h
|
Fix simulator builds, and some debugf() format strings.
|
2007-03-17 09:54:28 +00:00 |
|
disk.h
|
Partition type 0x84 is "OS/2 hidden C: drive"
|
2007-03-16 14:41:55 +00:00 |
|
ds2411.h
|
iAudio X5: Enable reading of DS2411 serial number. See it under System|Debug|View HW info.
|
2007-03-11 13:59:31 +00:00 |
|
eeprom_24cxx.h
|
eeprom driver for the h3x0 series, cleaned up the h1x0 series driver a bit, added debug entry for h3x0 that allows to write to the eeprom
|
2006-08-15 22:54:06 +00:00 |
|
eeprom_settings.h
|
Prepare core support for the iriver bootloader supporting ROM images
|
2007-01-12 18:34:00 +00:00 |
|
enc_base.h
|
SWCODEC Encoders: Better declarations of chunk flags. Mark constants as unsigned long to match structure variable type.
|
2007-02-10 07:19:32 +00:00 |
|
fat.h
|
Remove unused code, make comments c-style, make one private function static
|
2007-02-25 15:44:55 +00:00 |
|
fmradio.h
|
Change the radio screen and recording screen to use the global_status structure for state. I guess global_status had been added already and I missed it. :D
|
2007-02-07 04:24:21 +00:00 |
|
fmradio_i2c.h
|
Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5.
|
2006-07-21 08:42:28 +00:00 |
|
font.h
|
Use a larger font cache on the targets that can afford the (quite small) RAM usage
|
2007-03-05 08:32:35 +00:00 |
|
gdb_api.h
|
Mapped iFP DRAM to 0xc00000 and enabled caching in this area.
|
2006-02-12 23:16:05 +00:00 |
|
general.h
|
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
|
2006-11-06 18:18:05 +00:00 |
|
generic_i2c.h
|
Removed executable flag
|
2007-01-09 23:29:07 +00:00 |
|
hangul.h
|
Add support for loadable vkeyboard layouts
|
2006-03-29 16:21:42 +00:00 |
|
hwcompat.h
|
|
|
|
i2c-coldfire.h
|
Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5.
|
2006-07-21 08:42:28 +00:00 |
|
i2c-pp.h
|
Correct the (C) info
|
2007-02-27 21:22:29 +00:00 |
|
i2c.h
|
|
|
|
i2s.h
|
Move I2S initialisation out of the Wolfson codec driver
|
2006-12-09 19:18:18 +00:00 |
|
id3.h
|
Rating support for database and WPS (based on FS# 6301). A value between 0 and 10 can be assigned to the currently playing track using the WPS context menu. This value is displayed in the WPS using the %rr tag (replacing autoscore) and can be used as "rating" in tagnavi.config (examples provided).
|
2007-03-26 15:08:59 +00:00 |
|
isp1362.h
|
Removed executable flag
|
2007-01-09 23:29:07 +00:00 |
|
kernel.h
|
Make scheduler functions thread safe core wise. A big step towards playback running on COP (not yet possible because more protection on file system level is necessary).
|
2007-03-26 16:55:17 +00:00 |
|
lcd-charcell.h
|
First step of charcell LCD code rework: * Make it fully unicode aware so that adding non-ISO8859-1 scripts becomes possible (limited by the LCD capabilities of course). * Make the API more similar to the bitmap LCD code's API. * Moved hardware dependent parts to target tree. * Simplified code. * Jumpscroll temporarily non-functional.
|
2007-03-26 07:52:13 +00:00 |
|
lcd-remote.h
|
Move target specific parts of the H100 remote LCD driver to target tree.
|
2007-02-25 22:09:14 +00:00 |
|
lcd.h
|
First step of charcell LCD code rework: * Make it fully unicode aware so that adding non-ISO8859-1 scripts becomes possible (limited by the LCD capabilities of course). * Make the API more similar to the bitmap LCD code's API. * Moved hardware dependent parts to target tree. * Simplified code. * Jumpscroll temporarily non-functional.
|
2007-03-26 07:52:13 +00:00 |
|
led.h
|
removed old statusbar and buttonbar code
|
2005-11-20 01:02:14 +00:00 |
|
logf.h
|
Fix simulator builds, and some debugf() format strings.
|
2007-03-17 09:54:28 +00:00 |
|
m5636.h
|
Removed executable flag
|
2007-01-09 23:29:07 +00:00 |
|
mas.h
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
|
mcf5249.h
|
H300: (1) Use DMA for LCD updates, with auto-aligned line reads. Speeds up LCD updates by ~ 75% at 11MHz and 45MHz. Only ~ 11% speedup at 124MHz due to (2). (2) Less aggressive LCD transfer timing at 124MHz. With the previous timing, slightly corrupted display contents was reported, and with DMA transfers at least 4 waitstates are needed to make updates work at all. * A table in system-iriver.c shows settings for all integer multiples of the base clock frequency (info for developers, not yet complete).
|
2006-11-02 20:50:50 +00:00 |
|
mcf5250.h
|
Some corrections for MCF5250
|
2006-02-22 20:48:27 +00:00 |
|
mp3_playback.h
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
|
mp3data.h
|
Shave a few bytes off the binary size, especially on hwcodec targets
|
2007-02-15 22:55:22 +00:00 |
|
mpeg.h
|
Hook up .cue file detection via a callback klugde on HWCODEC, to make cue sheet support actually work.
|
2007-03-01 00:26:24 +00:00 |
|
panic.h
|
|
|
|
pcf50605.h
|
Move all iPod targets into the target tree. FS#5890
|
2006-10-05 10:58:51 +00:00 |
|
pcf50606.h
|
Some more M5 adjustments.
|
2007-03-05 01:31:26 +00:00 |
|
pcm_playback.h
|
Audio Init: Just can't stand that heirarchy. Add one level of abstraction. Might come in handy anyhow. Use sound.h instead of the conditional includes for audio hardware headers. If someone doesn't like that, yell at my evil twin. :)
|
2007-03-11 06:21:43 +00:00 |
|
pcm_record.h
|
Place all recording functionality on pcmrec thread to serialize all recording operations. Button mash problems should be ruled out of pcm_record.c. Add additional lightweight checks by default and display any warnings that occurred during recording in first line of recording screen when they occur by blinking back and forth from warning display to normal line (Warning: <hex bitmask>). Warnings are cleared when beginning a new recording so write the number down if you see it and file a report. Add heavier checks when PCMREC_PARANOID is defined in the player config header (encoders and pcm_record must be aware of the define since it changes the chunk header format). These checks are mainly concerned with things that may cause skipping but also add unwanted overhead for normal operation. Best used with logf enabled.
|
2006-12-10 14:21:31 +00:00 |
|
pcm_sampr.h
|
avoid using #if on undefined symbols, in preparation for -Wundef
|
2007-02-17 21:15:06 +00:00 |
|
pnx0101.h
|
PNX0101 changes:
|
2007-03-24 19:26:13 +00:00 |
|
power.h
|
Fix remaining CONFIG_TUNER checks.
|
2007-02-18 08:46:12 +00:00 |
|
powermgmt.h
|
Improved power management (FS#3001). Shutdown rockbox when the battery gets to a level where the device doesn't function properly. Calculate remaining charging time while charging (rather than remaining running time). Show "Low Battery" and "Battery Empty" warnings. Also fixes FS#4786.
|
2006-11-11 01:18:57 +00:00 |
|
pp5002.h
|
Dual core support for PP502x players (iPod G4 and later, iriver h10, Sansa - iPod G3 will be coming soon.) This allows threads to be run on either core provided that all communications between the cores is done using uncached memory. There should be no significant change in battery life from doing this. Documentation (on the RockboxKernel wiki page) will follow shortly.
|
2007-03-04 20:06:41 +00:00 |
|
pp5020.h
|
Dual core support for PP502x players (iPod G4 and later, iriver h10, Sansa - iPod G3 will be coming soon.) This allows threads to be run on either core provided that all communications between the cores is done using uncached memory. There should be no significant change in battery life from doing this. Documentation (on the RockboxKernel wiki page) will follow shortly.
|
2007-03-04 20:06:41 +00:00 |
|
pp5024.h
|
added mostly dummy changes to allow building of a Sansa e200 bootloader
|
2006-08-01 22:28:14 +00:00 |
|
profile.h
|
Fix profile builds
|
2006-08-24 13:10:20 +00:00 |
|
replaygain.h
|
Add support for parsing binary data ID3 tags. Add support for parsing RVA2 ID3 tags for replaygain values instead of TXXX tags when playing files tagged with ID3v2.4. Patch by psyche78 (task #2937)
|
2006-07-20 10:35:20 +00:00 |
|
rolo.h
|
Improved RoLo support for PortalPlayer - handles the COP correctly
|
2007-02-27 22:55:12 +00:00 |
|
rtc.h
|
Set CONFIG_RTC to 0 for non-RTC targets, and check with #if to profit from -Wundef. No code change.
|
2007-03-16 23:47:03 +00:00 |
|
s3c2440.h
|
Setup LCD ourselves; move LCD buffer and TTB to free up 1.7MB of memory
|
2007-01-13 02:24:15 +00:00 |
|
serial.h
|
Logf output on the serial port for h100 targets
|
2006-10-12 20:22:16 +00:00 |
|
sh7034.h
|
SH1: Changed UIE() to use the same reset method as on coldfire, using the watchdog timer. Should be more reliable this way. Disabled LED handling and added reboot-with-on for Ondio. * All: #ifdef cleanup in panicf(), added reboot-with-on for Ondio.
|
2005-11-09 00:54:43 +00:00 |
|
sound.h
|
Oops, missed a file from r12727
|
2007-03-11 17:58:14 +00:00 |
|
spdif.h
|
H100/General: HAL for S/PDIF and refinement/bufixes in optical output powering/source selection.
|
2006-11-13 23:21:54 +00:00 |
|
structec.h
|
Make database endianess independent.
|
2007-02-13 21:51:18 +00:00 |
|
sw_i2c.h
|
FS#6419 - driver for H1x0 series RTC Mod with runtime detection
|
2007-02-28 13:20:36 +00:00 |
|
system.h
|
Make scheduler functions thread safe core wise. A big step towards playback running on COP (not yet possible because more protection on file system level is necessary).
|
2007-03-26 16:55:17 +00:00 |
|
thread.h
|
This should fix the remaining compilation issues.
|
2007-03-26 17:58:45 +00:00 |
|
timer.h
|
PNX0101 changes:
|
2007-03-24 19:26:13 +00:00 |
|
tlv320.h
|
put back the return types which got lost in the previous commit
|
2006-12-06 13:48:50 +00:00 |
|
tuner.h
|
FM Radio mishmash: Make a quieter screen for the SWCODEC targets esp. for the benefit of x5; I wasn't sure if it was good to alter timeouts for HW codec. Simplify things and prepare for eventual scanning and tuning changes (which should help quiet x5 down even more). Make things behave themselves better in general. Enable SWCODEC FM Recording menu and screen for sim as a bonus.
|
2007-03-16 14:40:40 +00:00 |
|
uda1380.h
|
put back the return types which got lost in the previous commit
|
2006-12-06 13:48:50 +00:00 |
|
usb.h
|
FS#4770 - Add USB charging for the H300 series
|
2007-02-01 10:47:22 +00:00 |
|
usb_serial.h
|
Added non-blocking get/put_byte routines.
|
2006-02-03 23:28:53 +00:00 |
|
wm8731l.h
|
FS#6096. Recording on PortalPlayer targets (H10, iPod Video, iPod 4g, iPod Color, iPod Nano).
|
2006-12-18 01:52:21 +00:00 |
|
wm8758.h
|
FS#6096. Recording on PortalPlayer targets (H10, iPod Video, iPod 4g, iPod Color, iPod Nano).
|
2006-12-18 01:52:21 +00:00 |
|
wm8975.h
|
move some audio driver specific code to the correspoding files
|
2006-12-06 13:34:15 +00:00 |
|
wmcodec.h
|
Move I2S initialisation out of the Wolfson codec driver
|
2006-12-09 19:18:18 +00:00 |
b1a5c0ffa9