rockbox/firmware/drivers/dac.c
Linus Nielsen Feltzing e1cb054fa0 Now uses i2c_begin/end
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@1147 a1c6a512-1295-4272-9138-f99709370657
2002-06-24 12:35:37 +00:00

74 lines
2 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Linus Nielsen Feltzing
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "i2c.h"
#include "debug.h"
#include "dac.h"
int dac_volume(unsigned int volume)
{
int ret = 0;
unsigned char buf[3];
i2c_begin();
if(volume > 0x38)
volume = 0x38;
buf[0] = DAC_REG_WRITE | DAC_AVOL;
buf[1] = (volume & 0x3f) | 0x40; /* Deemphasis ON */
buf[2] = volume & 0x3f;
/* send read command */
if (i2c_write(DAC_DEV_WRITE,buf,3))
{
ret = -1;
}
i2c_end();
return ret;
}
/******************************************************************
** Bit6: 0 = 3V 1 = 5V
** Bit5: 0 = normal 1 = low power
** Bit4: 0 = AUX2 off 1 = AUX2 on
** Bit3: 0 = AUX1 off 1 = AUX2 on
** Bit2: 0 = DAC off 1 = DAC on
** Bit1: 0 = stereo 1 = mono
** Bit0: 0 = normal right amp 1 = inverted right amp
******************************************************************/
int dac_config(int value)
{
int ret = 0;
unsigned char buf[2];
i2c_begin();
buf[0] = DAC_REG_WRITE | DAC_GCFG;
buf[1] = value;
/* send read command */
if (i2c_write(DAC_DEV_WRITE,buf,2))
{
ret = -1;
}
i2c_end();
return 0;
}