0e16bd3cc9
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13662 a1c6a512-1295-4272-9138-f99709370657
399 lines
9.5 KiB
C
399 lines
9.5 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2007 by Linus Nielsen Feltzing
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
|
|
#include <stdlib.h>
|
|
#include <stdio.h>
|
|
#include "inttypes.h"
|
|
#include "string.h"
|
|
#include "cpu.h"
|
|
#include "system.h"
|
|
#include "lcd.h"
|
|
#include "lcd-remote.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include "ata.h"
|
|
#include "usb.h"
|
|
#include "disk.h"
|
|
#include "font.h"
|
|
#include "adc.h"
|
|
#include "backlight.h"
|
|
#include "backlight-target.h"
|
|
#include "button.h"
|
|
#include "panic.h"
|
|
#include "power.h"
|
|
#include "file.h"
|
|
#include "uda1380.h"
|
|
#include "pcf50606.h"
|
|
#include "common.h"
|
|
#include "rbunicode.h"
|
|
#include "isp1362.h"
|
|
|
|
#include <stdarg.h>
|
|
|
|
/* Maximum allowed firmware image size. 10MB is more than enough */
|
|
#define MAX_LOADSIZE (10*1024*1024)
|
|
|
|
#define DRAM_START 0x31000000
|
|
|
|
char version[] = APPSVERSION;
|
|
|
|
/* Reset the cookie for the crt0 crash check */
|
|
inline void __reset_cookie(void)
|
|
{
|
|
asm(" move.l #0,%d0");
|
|
asm(" move.l %d0,0x10017ffc");
|
|
}
|
|
|
|
void start_iriver_fw(void)
|
|
{
|
|
asm(" move.w #0x2700,%sr");
|
|
__reset_cookie();
|
|
asm(" movec.l %d0,%vbr");
|
|
asm(" move.l 0,%sp");
|
|
asm(" lea.l 8,%a0");
|
|
asm(" jmp (%a0)");
|
|
}
|
|
|
|
void start_firmware(void)
|
|
{
|
|
asm(" move.w #0x2700,%sr");
|
|
__reset_cookie();
|
|
asm(" move.l %0,%%d0" :: "i"(DRAM_START));
|
|
asm(" movec.l %d0,%vbr");
|
|
asm(" move.l %0,%%sp" :: "m"(*(int *)DRAM_START));
|
|
asm(" move.l %0,%%a0" :: "m"(*(int *)(DRAM_START+4)));
|
|
asm(" jmp (%a0)");
|
|
}
|
|
|
|
void shutdown(void)
|
|
{
|
|
printf("Shutting down...");
|
|
|
|
/* We need to gracefully spin down the disk to prevent clicks. */
|
|
if (ide_powered())
|
|
{
|
|
/* Make sure ATA has been initialized. */
|
|
ata_init();
|
|
|
|
/* And put the disk into sleep immediately. */
|
|
ata_sleepnow();
|
|
}
|
|
|
|
sleep(HZ*2);
|
|
|
|
__backlight_off();
|
|
__remote_backlight_off();
|
|
|
|
__reset_cookie();
|
|
power_off();
|
|
}
|
|
|
|
/* Print the battery voltage (and a warning message). */
|
|
void check_battery(void)
|
|
{
|
|
int adc_battery, battery_voltage, batt_int, batt_frac;
|
|
|
|
adc_battery = adc_read(ADC_BATTERY);
|
|
|
|
battery_voltage = (adc_battery * BATTERY_SCALE_FACTOR) / 10000;
|
|
batt_int = battery_voltage / 100;
|
|
batt_frac = battery_voltage % 100;
|
|
|
|
printf("Batt: %d.%02dV", batt_int, batt_frac);
|
|
|
|
if (battery_voltage <= 310)
|
|
{
|
|
printf("WARNING! BATTERY LOW!!");
|
|
sleep(HZ*2);
|
|
}
|
|
}
|
|
|
|
/* From the pcf50606 driver */
|
|
extern unsigned char pcf50606_intregs[3];
|
|
|
|
/* From common.c */
|
|
extern int line;
|
|
extern int remote_line;
|
|
|
|
void main(void)
|
|
{
|
|
int i;
|
|
int rc;
|
|
bool rc_on_button = false;
|
|
bool on_button = false;
|
|
bool rec_button = false;
|
|
bool hold_status = false;
|
|
int data;
|
|
bool rtc_alarm;
|
|
int button;
|
|
|
|
/* We want to read the buttons as early as possible, before the user
|
|
releases the ON button */
|
|
|
|
/* Set GPIO33, GPIO37, GPIO38 and GPIO52 as general purpose inputs
|
|
(The ON and Hold buttons on the main unit and the remote) */
|
|
or_l(0x00100062, &GPIO1_FUNCTION);
|
|
and_l(~0x00100062, &GPIO1_ENABLE);
|
|
|
|
data = GPIO1_READ;
|
|
if ((data & 0x20) == 0)
|
|
on_button = true;
|
|
|
|
if ((data & 0x40) == 0)
|
|
rc_on_button = true;
|
|
|
|
/* Set the default state of the hard drive power to OFF */
|
|
ide_power_enable(false);
|
|
|
|
power_init();
|
|
|
|
/* Check the interrupt registers if it was an RTC alarm */
|
|
rtc_alarm = (pcf50606_intregs[0] & 0x80)?true:false;
|
|
|
|
/* Turn off if we believe the start was accidental */
|
|
if(!(rtc_alarm || on_button || rc_on_button ||
|
|
usb_detect() || charger_inserted())) {
|
|
__reset_cookie();
|
|
power_off();
|
|
}
|
|
|
|
audiohw_reset();
|
|
|
|
/* Start with the main backlight OFF. */
|
|
__backlight_init();
|
|
__backlight_off();
|
|
|
|
__remote_backlight_on();
|
|
|
|
system_init();
|
|
kernel_init();
|
|
|
|
/* Set up waitstates for the peripherals */
|
|
set_cpu_frequency(0); /* PLL off */
|
|
coldfire_set_pllcr_audio_bits(DEFAULT_PLLCR_AUDIO_BITS);
|
|
set_irq_level(0);
|
|
|
|
isp1362_init();
|
|
|
|
adc_init();
|
|
button_init();
|
|
|
|
backlight_init();
|
|
|
|
lcd_init();
|
|
lcd_remote_init();
|
|
font_init();
|
|
|
|
lcd_setfont(FONT_SYSFIXED);
|
|
|
|
printf("Rockbox boot loader");
|
|
printf("Version %s", version);
|
|
|
|
sleep(HZ/50); /* Allow the button driver to check the buttons */
|
|
rec_button = ((button_status() & BUTTON_REC) == BUTTON_REC)
|
|
|| ((button_status() & BUTTON_RC_REC) == BUTTON_RC_REC);
|
|
|
|
check_battery();
|
|
|
|
if(rtc_alarm)
|
|
printf("RTC alarm detected");
|
|
|
|
/* Don't start if the Hold button is active on the device you
|
|
are starting with */
|
|
if ((on_button && button_hold()) ||
|
|
(rc_on_button && remote_button_hold()))
|
|
{
|
|
hold_status = true;
|
|
}
|
|
if (hold_status && !rtc_alarm && !usb_detect() && !charger_inserted())
|
|
{
|
|
if (detect_original_firmware())
|
|
{
|
|
printf("Hold switch on");
|
|
shutdown();
|
|
}
|
|
}
|
|
|
|
/* Holding REC while starting runs the original firmware */
|
|
if (detect_original_firmware() && rec_button)
|
|
{
|
|
printf("Starting original firmware...");
|
|
start_iriver_fw();
|
|
}
|
|
|
|
if(charger_inserted())
|
|
{
|
|
const char charging_msg[] = "Charging...";
|
|
const char complete_msg[] = "Charging complete";
|
|
const char *msg;
|
|
int w, h;
|
|
bool blink_toggle = false;
|
|
bool request_start = false;
|
|
|
|
cpu_idle_mode(true);
|
|
|
|
while(charger_inserted() && !request_start)
|
|
{
|
|
button = button_get_w_tmo(HZ);
|
|
|
|
switch(button)
|
|
{
|
|
case BUTTON_ON:
|
|
request_start = true;
|
|
break;
|
|
|
|
case BUTTON_NONE: /* Timeout */
|
|
|
|
if(charging_state())
|
|
{
|
|
/* To be replaced with a nice animation */
|
|
blink_toggle = !blink_toggle;
|
|
msg = charging_msg;
|
|
}
|
|
else
|
|
{
|
|
blink_toggle = true;
|
|
msg = complete_msg;
|
|
}
|
|
|
|
font_getstringsize(msg, &w, &h, FONT_SYSFIXED);
|
|
reset_screen();
|
|
if(blink_toggle)
|
|
lcd_putsxy((LCD_WIDTH-w)/2, (LCD_HEIGHT-h)/2, msg);
|
|
|
|
check_battery();
|
|
break;
|
|
}
|
|
|
|
if(usb_detect())
|
|
request_start = true;
|
|
}
|
|
if(!request_start)
|
|
{
|
|
__reset_cookie();
|
|
power_off();
|
|
}
|
|
|
|
cpu_idle_mode(false);
|
|
}
|
|
|
|
usb_init();
|
|
|
|
/* A hack to enter USB mode without using the USB thread */
|
|
if(usb_detect())
|
|
{
|
|
const char msg[] = "Bootloader USB mode";
|
|
int w, h;
|
|
font_getstringsize(msg, &w, &h, FONT_SYSFIXED);
|
|
reset_screen();
|
|
lcd_putsxy((LCD_WIDTH-w)/2, (LCD_HEIGHT-h)/2, msg);
|
|
lcd_update();
|
|
|
|
lcd_remote_puts(0, 3, msg);
|
|
lcd_remote_update();
|
|
|
|
ide_power_enable(true);
|
|
ata_enable(false);
|
|
sleep(HZ/20);
|
|
usb_enable(true);
|
|
cpu_idle_mode(true);
|
|
while (usb_detect())
|
|
{
|
|
/* Print the battery status. */
|
|
line = 0;
|
|
remote_line = 0;
|
|
check_battery();
|
|
|
|
ata_spin(); /* Prevent the drive from spinning down */
|
|
sleep(HZ);
|
|
}
|
|
|
|
cpu_idle_mode(false);
|
|
usb_enable(false);
|
|
|
|
reset_screen();
|
|
lcd_update();
|
|
}
|
|
|
|
rc = ata_init();
|
|
if(rc)
|
|
{
|
|
reset_screen();
|
|
printf("ATA error: %d", rc);
|
|
printf("Insert USB cable and press");
|
|
printf("a button");
|
|
while(!(button_get(true) & BUTTON_REL));
|
|
}
|
|
|
|
|
|
disk_init();
|
|
|
|
rc = disk_mount_all();
|
|
if (rc<=0)
|
|
{
|
|
reset_screen();
|
|
printf("No partition found");
|
|
while(button_get(true) != SYS_USB_CONNECTED) {};
|
|
}
|
|
|
|
printf("Loading firmware");
|
|
i = load_firmware((unsigned char *)DRAM_START, BOOTFILE, MAX_LOADSIZE);
|
|
if(i < 0)
|
|
printf("Error: %s", strerror(i));
|
|
|
|
if (i == EOK)
|
|
start_firmware();
|
|
|
|
if (!detect_original_firmware())
|
|
{
|
|
printf("No firmware found on disk");
|
|
sleep(HZ*2);
|
|
shutdown();
|
|
}
|
|
else {
|
|
sleep(HZ*2);
|
|
start_iriver_fw();
|
|
}
|
|
}
|
|
|
|
/* These functions are present in the firmware library, but we reimplement
|
|
them here because the originals do a lot more than we want */
|
|
void screen_dump(void)
|
|
{
|
|
}
|
|
|
|
int usb_screen(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
unsigned short *bidi_l2v(const unsigned char *str, int orientation)
|
|
{
|
|
static unsigned short utf16_buf[SCROLL_LINE_SIZE];
|
|
unsigned short *target;
|
|
(void)orientation;
|
|
|
|
target = utf16_buf;
|
|
|
|
while (*str)
|
|
str = utf8decode(str, target++);
|
|
*target = 0;
|
|
return utf16_buf;
|
|
}
|