6ef2db2c11
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15655 a1c6a512-1295-4272-9138-f99709370657
372 lines
10 KiB
C
372 lines
10 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Rockbox driver for iPod LCDs
|
|
*
|
|
* Based on code from the ipodlinux project - http://ipodlinux.org/
|
|
* Adapted for Rockbox in November 2005
|
|
*
|
|
* Original file: linux/arch/armnommu/mach-ipod/fb.c
|
|
*
|
|
* Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include "cpu.h"
|
|
#include "lcd.h"
|
|
#include "kernel.h"
|
|
#include "system.h"
|
|
#include "hwcompat.h"
|
|
|
|
/* LCD command codes for HD66753 */
|
|
|
|
#define R_START_OSC 0x00
|
|
#define R_DRV_OUTPUT_CONTROL 0x01
|
|
#define R_DRV_WAVEFORM_CONTROL 0x02
|
|
#define R_POWER_CONTROL 0x03
|
|
#define R_CONTRAST_CONTROL 0x04
|
|
#define R_ENTRY_MODE 0x05
|
|
#define R_ROTATION 0x06
|
|
#define R_DISPLAY_CONTROL 0x07
|
|
#define R_CURSOR_CONTROL 0x08
|
|
#define R_HORIZONTAL_CURSOR_POS 0x0b
|
|
#define R_VERTICAL_CURSOR_POS 0x0c
|
|
#define R_1ST_SCR_DRV_POS 0x0d
|
|
#define R_2ND_SCR_DRV_POS 0x0e
|
|
#define R_RAM_WRITE_MASK 0x10
|
|
#define R_RAM_ADDR_SET 0x11
|
|
#define R_RAM_DATA 0x12
|
|
|
|
#ifdef HAVE_BACKLIGHT_INVERSION
|
|
/* The backlight makes the LCD appear negative on the 1st/2nd gen */
|
|
static bool lcd_inverted = false;
|
|
static bool lcd_backlit = false;
|
|
static void invert_display(void);
|
|
#endif
|
|
|
|
#if defined(IPOD_1G2G) || defined(IPOD_3G)
|
|
static unsigned short power_reg_h;
|
|
#define POWER_REG_H power_reg_h
|
|
#else
|
|
#define POWER_REG_H 0x1200
|
|
#endif
|
|
|
|
#ifdef IPOD_1G2G
|
|
static unsigned short contrast_reg_h;
|
|
#define CONTRAST_REG_H contrast_reg_h
|
|
#else
|
|
#define CONTRAST_REG_H 0x400
|
|
#endif
|
|
|
|
/* needed for flip */
|
|
static int addr_offset;
|
|
#if defined(IPOD_MINI) || defined(IPOD_MINI2G)
|
|
static int pix_offset;
|
|
#endif
|
|
|
|
static const unsigned char dibits[16] ICONST_ATTR = {
|
|
0x00, 0x03, 0x0C, 0x0F, 0x30, 0x33, 0x3C, 0x3F,
|
|
0xC0, 0xC3, 0xCC, 0xCF, 0xF0, 0xF3, 0xFC, 0xFF
|
|
};
|
|
|
|
/* wait for LCD with timeout */
|
|
static inline void lcd_wait_write(void)
|
|
{
|
|
while (LCD1_CONTROL & LCD1_BUSY_MASK);
|
|
}
|
|
|
|
/* send LCD data */
|
|
#if CONFIG_CPU == PP5002
|
|
STATICIRAM void ICODE_ATTR lcd_send_data(unsigned data)
|
|
#else
|
|
static void lcd_send_data(unsigned data)
|
|
#endif
|
|
{
|
|
lcd_wait_write();
|
|
#ifdef IPOD_MINI2G
|
|
LCD1_CMD = data | 0x760000;
|
|
#else
|
|
LCD1_DATA = data >> 8;
|
|
lcd_wait_write();
|
|
LCD1_DATA = data & 0xff;
|
|
#endif
|
|
}
|
|
|
|
/* send LCD command */
|
|
static void lcd_prepare_cmd(unsigned cmd)
|
|
{
|
|
lcd_wait_write();
|
|
#ifdef IPOD_MINI2G
|
|
LCD1_CMD = cmd | 0x740000;
|
|
#else
|
|
LCD1_CMD = 0;
|
|
lcd_wait_write();
|
|
LCD1_CMD = cmd;
|
|
#endif
|
|
}
|
|
|
|
/* send LCD command and data */
|
|
static void lcd_cmd_and_data(unsigned cmd, unsigned data)
|
|
{
|
|
lcd_prepare_cmd(cmd);
|
|
lcd_send_data(data);
|
|
}
|
|
|
|
/* LCD init */
|
|
void lcd_init_device(void)
|
|
{
|
|
#ifdef IPOD_1G2G
|
|
if ((IPOD_HW_REVISION >> 16) == 1)
|
|
{
|
|
power_reg_h = 0x1500;
|
|
contrast_reg_h = 0x700;
|
|
}
|
|
else /* 2nd gen */
|
|
{
|
|
if (inl(0xcf00404c) & 0x01) /* check bit 0 */
|
|
{
|
|
power_reg_h = 0x1520; /* Set step-up frequency to f/8 instead of
|
|
* f/32, for better blacklevel stability */
|
|
contrast_reg_h = 0x400;
|
|
}
|
|
else
|
|
{
|
|
power_reg_h = 0x1100;
|
|
contrast_reg_h = 0x300;
|
|
}
|
|
}
|
|
#elif defined IPOD_3G
|
|
if (inl(0xcf00404c) & 0x01) /* check bit 0 */
|
|
power_reg_h = 0x1520; /* Set step-up frequency to f/8 instead of
|
|
* f/32, for better blacklevel stability */
|
|
else
|
|
power_reg_h = 0x1100;
|
|
#endif
|
|
|
|
#ifdef IPOD_MINI2G /* serial LCD hookup */
|
|
lcd_wait_write();
|
|
LCD1_CONTROL = 0x01730084; /* fastest setting */
|
|
#elif defined(IPOD_1G2G) || defined(IPOD_3G)
|
|
LCD1_CONTROL = (LCD1_CONTROL & 0x0002) | 0x0084; /* fastest setting, keep backlight bit */
|
|
#else
|
|
LCD1_CONTROL = 0x0084; /* fastest setting */
|
|
#endif
|
|
|
|
lcd_cmd_and_data(R_POWER_CONTROL, POWER_REG_H | 0xc);
|
|
#ifdef HAVE_BACKLIGHT_INVERSION
|
|
invert_display();
|
|
#else
|
|
lcd_cmd_and_data(R_DISPLAY_CONTROL, 0x0015);
|
|
#endif
|
|
lcd_set_flip(false);
|
|
lcd_cmd_and_data(R_ENTRY_MODE, 0x0000);
|
|
|
|
#ifdef IPOD_4G
|
|
GPIOB_ENABLE |= 0x4; /* B02 enable */
|
|
GPIOB_ENABLE |= 0x8; /* B03 enable */
|
|
GPO32_ENABLE |= 0x2000000; /* D01 enable */
|
|
GPO32_VAL |= 0x2000000; /* D01 =1 */
|
|
|
|
DEV_EN |= 0x20000; /* PWM enable */
|
|
#endif
|
|
}
|
|
|
|
/*** hardware configuration ***/
|
|
|
|
int lcd_default_contrast(void)
|
|
{
|
|
#ifdef IPOD_1G2G
|
|
return 28;
|
|
#elif defined(IPOD_MINI) || defined(IPOD_MINI2G) || defined(IPOD_3G)
|
|
return 42;
|
|
#elif defined(IPOD_4G)
|
|
return 35;
|
|
#endif
|
|
}
|
|
|
|
/* Rockbox stores the contrast as 0..63 - we add 64 to it */
|
|
void lcd_set_contrast(int val)
|
|
{
|
|
if (val < 0) val = 0;
|
|
else if (val > 63) val = 63;
|
|
|
|
lcd_cmd_and_data(R_CONTRAST_CONTROL, CONTRAST_REG_H | (val + 64));
|
|
}
|
|
|
|
#ifdef HAVE_BACKLIGHT_INVERSION
|
|
static void invert_display(void)
|
|
{
|
|
if (lcd_inverted ^ lcd_backlit)
|
|
lcd_cmd_and_data(R_DISPLAY_CONTROL, 0x0017);
|
|
else
|
|
lcd_cmd_and_data(R_DISPLAY_CONTROL, 0x0015);
|
|
}
|
|
|
|
void lcd_set_invert_display(bool yesno)
|
|
{
|
|
lcd_inverted = yesno;
|
|
invert_display();
|
|
}
|
|
|
|
void lcd_set_backlight_inversion(bool yesno)
|
|
{
|
|
lcd_backlit = yesno;
|
|
invert_display();
|
|
}
|
|
#else
|
|
void lcd_set_invert_display(bool yesno)
|
|
{
|
|
if (yesno)
|
|
lcd_cmd_and_data(R_DISPLAY_CONTROL, 0x0017);
|
|
else
|
|
lcd_cmd_and_data(R_DISPLAY_CONTROL, 0x0015);
|
|
}
|
|
#endif
|
|
|
|
/* turn the display upside down (call lcd_update() afterwards) */
|
|
void lcd_set_flip(bool yesno)
|
|
{
|
|
#if defined(IPOD_MINI) || defined(IPOD_MINI2G)
|
|
if (yesno) {
|
|
/* 168x112, inverse COM order */
|
|
lcd_cmd_and_data(R_DRV_OUTPUT_CONTROL, 0x020d);
|
|
lcd_cmd_and_data(R_1ST_SCR_DRV_POS, 0x8316); /* 22..131 */
|
|
addr_offset = (22 << 5) | (20 - 4);
|
|
pix_offset = -2;
|
|
} else {
|
|
/* 168x112, inverse SEG order */
|
|
lcd_cmd_and_data(R_DRV_OUTPUT_CONTROL, 0x010d);
|
|
lcd_cmd_and_data(R_1ST_SCR_DRV_POS, 0x6d00); /* 0..109 */
|
|
addr_offset = 20;
|
|
pix_offset = 0;
|
|
}
|
|
#else
|
|
if (yesno) {
|
|
/* 168x128, inverse SEG & COM order */
|
|
lcd_cmd_and_data(R_DRV_OUTPUT_CONTROL, 0x030f);
|
|
lcd_cmd_and_data(R_1ST_SCR_DRV_POS, 0x8304); /* 4..131 */
|
|
addr_offset = (4 << 5) | (20 - 1);
|
|
} else {
|
|
/* 168x128 */
|
|
lcd_cmd_and_data(R_DRV_OUTPUT_CONTROL, 0x000f);
|
|
lcd_cmd_and_data(R_1ST_SCR_DRV_POS, 0x7f00); /* 0..127 */
|
|
addr_offset = 20;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void lcd_enable(bool on)
|
|
{
|
|
if (on)
|
|
{
|
|
lcd_cmd_and_data(R_START_OSC, 1); /* start oscillation */
|
|
sleep(HZ/10); /* wait 10ms */
|
|
lcd_cmd_and_data(R_POWER_CONTROL, POWER_REG_H); /*clear standby mode */
|
|
lcd_cmd_and_data(R_POWER_CONTROL, POWER_REG_H | 0xc);
|
|
/* enable opamp & booster */
|
|
}
|
|
else
|
|
{
|
|
lcd_cmd_and_data(R_POWER_CONTROL, POWER_REG_H);
|
|
/* switch off opamp & booster */
|
|
lcd_cmd_and_data(R_POWER_CONTROL, POWER_REG_H | 0x1);
|
|
/* enter standby mode */
|
|
}
|
|
}
|
|
|
|
/*** update functions ***/
|
|
|
|
/* Performance function that works with an external buffer
|
|
note that x, bwidtht and stride are in 8-pixel units! */
|
|
void lcd_blit(const unsigned char* data, int bx, int y, int bwidth,
|
|
int height, int stride)
|
|
{
|
|
const unsigned char *src, *src_end;
|
|
|
|
while (height--) {
|
|
src = data;
|
|
src_end = data + bwidth;
|
|
lcd_cmd_and_data(R_RAM_ADDR_SET, (y++ << 5) + addr_offset - bx);
|
|
lcd_prepare_cmd(R_RAM_DATA);
|
|
do {
|
|
unsigned byte = *src++;
|
|
lcd_send_data((dibits[byte>>4] << 8) | dibits[byte&0x0f]);
|
|
} while (src < src_end);
|
|
data += stride;
|
|
}
|
|
}
|
|
|
|
void lcd_update_rect(int x, int y, int width, int height)
|
|
{
|
|
int xmax, ymax;
|
|
|
|
if (x + width > LCD_WIDTH)
|
|
width = LCD_WIDTH - x;
|
|
if (width <= 0)
|
|
return;
|
|
|
|
ymax = y + height - 1;
|
|
if (ymax >= LCD_HEIGHT)
|
|
ymax = LCD_HEIGHT - 1;
|
|
|
|
#if defined(IPOD_MINI) || defined(IPOD_MINI2G)
|
|
x += pix_offset;
|
|
#endif
|
|
/* writing is done in 16-bit units (8 pixels) */
|
|
xmax = (x + width - 1) >> 3;
|
|
x >>= 3;
|
|
width = xmax - x + 1;
|
|
|
|
for (; y <= ymax; y++) {
|
|
unsigned char *data, *data_end;
|
|
|
|
lcd_cmd_and_data(R_RAM_ADDR_SET, (y << 5) + addr_offset - x);
|
|
lcd_prepare_cmd(R_RAM_DATA);
|
|
|
|
data = &lcd_framebuffer[y][2*x];
|
|
data_end = data + 2 * width;
|
|
#if defined(IPOD_MINI) || defined(IPOD_MINI2G)
|
|
if (pix_offset == -2) {
|
|
unsigned cur_word = *data++;
|
|
do {
|
|
cur_word = (cur_word << 8) | *data++;
|
|
cur_word = (cur_word << 8) | *data++;
|
|
lcd_send_data((cur_word >> 4) & 0xffff);
|
|
} while (data <= data_end);
|
|
} else
|
|
#endif
|
|
{
|
|
do {
|
|
unsigned highbyte = *data++;
|
|
lcd_send_data((highbyte << 8) | *data++);
|
|
} while (data < data_end);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Update the display. */
|
|
void lcd_update(void)
|
|
{
|
|
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
|
|
}
|
|
|
|
#ifdef HAVE_LCD_SHUTDOWN
|
|
/* LCD powerdown */
|
|
void lcd_shutdown(void)
|
|
{
|
|
lcd_cmd_and_data(R_POWER_CONTROL, 0x1500); /* Turn off op amp power */
|
|
lcd_cmd_and_data(R_POWER_CONTROL, 0x1502); /* Put LCD driver in standby */
|
|
}
|
|
#endif
|