a5fd68d13d
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23255 a1c6a512-1295-4272-9138-f99709370657
95 lines
3.4 KiB
C
95 lines
3.4 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright © 2008 Rafaël Carré
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/* ARM PrimeCell PL180 SD/MMC controller */
|
|
|
|
/* MCIStatus bits */
|
|
|
|
/* bits 10:0 can be cleared by a write in MCIClear */
|
|
#define MCI_CMD_CRC_FAIL (1<<0)
|
|
#define MCI_DATA_CRC_FAIL (1<<1)
|
|
#define MCI_CMD_TIMEOUT (1<<2)
|
|
#define MCI_DATA_TIMEOUT (1<<3)
|
|
#define MCI_TX_UNDERRUN (1<<4)
|
|
#define MCI_RX_OVERRUN (1<<5)
|
|
#define MCI_CMD_RESP_END (1<<6)
|
|
#define MCI_CMD_SENT (1<<7)
|
|
#define MCI_DATA_END (1<<8)
|
|
#define MCI_START_BIT_ERR (1<<9)
|
|
#define MCI_DATA_BLOCK_END (1<<10)
|
|
/* bits 21:11 are only cleared by the hardware logic */
|
|
#define MCI_CMD_ACTIVE (1<<11)
|
|
#define MCI_TX_ACTIVE (1<<12)
|
|
#define MCI_RX_ACTIVE (1<<13)
|
|
#define MCI_TX_FIFO_HALF_EMPTY (1<<14)
|
|
#define MCI_RX_FIFO_HALF_FULL (1<<15)
|
|
#define MCI_TX_FIFO_FULL (1<<16)
|
|
#define MCI_RX_FIFO_FULL (1<<17)
|
|
#define MCI_TX_FIFO_EMPTY (1<<18)
|
|
#define MCI_RX_FIFO_EMPTY (1<<19)
|
|
#define MCI_TX_DATA_AVAIL (1<<20)
|
|
#define MCI_RX_DATA_AVAIL (1<<21)
|
|
|
|
|
|
/* MCIPower bits */
|
|
#define MCI_POWER_OFF 0x0
|
|
/* 0x1 is reserved */
|
|
#define MCI_POWER_UP 0x2
|
|
#define MCI_POWER_ON 0x3
|
|
|
|
/* bits 5:2 are the voltage */
|
|
#define MCI_VDD_2_0 (0<<2) /* 2.0 - 2.6 comm only */
|
|
#define MCI_VDD_2_1 (1<<2)
|
|
#define MCI_VDD_2_2 (2<<2)
|
|
#define MCI_VDD_2_3 (3<<2)
|
|
#define MCI_VDD_2_4 (4<<2)
|
|
#define MCI_VDD_2_5 (5<<2)
|
|
#define MCI_VDD_2_6 (6<<2)
|
|
|
|
#define MCI_VDD_2_7 (7<<2) /* 2.7 - 3.6 Data Transfer */
|
|
#define MCI_VDD_2_8 (8<<2)
|
|
#define MCI_VDD_2_9 (9<<2)
|
|
#define MCI_VDD_3_0 (10<<2)
|
|
#define MCI_VDD_3_1 (11<<2)
|
|
#define MCI_VDD_3_2 (12<<2)
|
|
#define MCI_VDD_3_3 (13<<2)
|
|
#define MCI_VDD_3_4 (14<<2)
|
|
#define MCI_VDD_3_5 (15<<2)
|
|
|
|
#define MCI_POWER_OPEN_DRAIN (1<<6)
|
|
#define MCI_POWER_ROD (1<<7)
|
|
|
|
|
|
/* MCIClock bits */
|
|
/* bits 7:0 are the clock divider */
|
|
#define MCI_CLOCK_ENABLE (1<<8)
|
|
#define MCI_CLOCK_POWERSAVE (1<<9)
|
|
#define MCI_CLOCK_BYPASS (1<<10)
|
|
#define MCI_CLOCK_WIDEBUS (1<<11)
|
|
|
|
|
|
/* MCICommand bits */
|
|
/* bits 5:0 are the command index */
|
|
#define MCI_COMMAND_RESPONSE (1<<6)
|
|
#define MCI_COMMAND_LONG_RESPONSE (1<<7)
|
|
#define MCI_COMMAND_INTERRUPT (1<<8)
|
|
#define MCI_COMMAND_PENDING (1<<9)
|
|
#define MCI_COMMAND_ENABLE (1<<10)
|