2670e3f038
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20511 a1c6a512-1295-4272-9138-f99709370657
210 lines
6.1 KiB
C
210 lines
6.1 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2008 by Catalin Patulea
|
|
* Copyright (C) 2008 by Maurus Cuelenaere
|
|
* Copyright (C) 2009 by Karl Kurbjun
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include "registers.h"
|
|
#include "arm.h"
|
|
#include "dma.h"
|
|
|
|
/* This is placed at the right (aligned) address using linker.cmd. */
|
|
#pragma DATA_SECTION (data, ".dma")
|
|
|
|
#define DSP_BUFFER_SIZE PCM_SIZE/2
|
|
|
|
/* This is the buffer on the DSP side used for SARAM to McBSP (IIS) */
|
|
signed short data[DSP_BUFFER_SIZE];
|
|
|
|
/* These two describe the location of the buffer on the ARM (set in DSPHINT
|
|
* and dspinit)
|
|
*/
|
|
volatile unsigned short sdem_addrh;
|
|
volatile unsigned short sdem_addrl;
|
|
|
|
/* This is the size of the ARM buffer (set in DSPHINT and dspinit) */
|
|
volatile unsigned short sdem_dsp_size;
|
|
|
|
/* These two variables keep track of the buffer level in the DSP, dsp_level,
|
|
* (SARAM to McBSP) and the level on the ARM buffer (sdem_level).
|
|
*/
|
|
unsigned short dsp_level=0;
|
|
unsigned short sdem_level=0;
|
|
|
|
/* This is used to keep track of the last SDRAM to SARAM transfer */
|
|
unsigned short last_size;
|
|
|
|
/* This tells us which half of the DSP buffer (data) is free */
|
|
unsigned short dma0_unlocked;
|
|
|
|
volatile unsigned short dma0_stopped=1;
|
|
|
|
short waiting=0;
|
|
/* rebuffer sets up the next SDRAM to SARAM transfer and tells the ARM when it
|
|
* is done with a buffer.
|
|
*/
|
|
|
|
/* Notes: The upper limit on larger buffers is the size of a short. If larger
|
|
* buffer sizes are needed the code on the ARM side needs to be changed to
|
|
* update a full long.
|
|
*/
|
|
void rebuffer(void)
|
|
{
|
|
unsigned long sdem_addr;
|
|
|
|
if(dma0_stopped==1) /* Stop */
|
|
{
|
|
DMPREC&=0xFFFE; /* Stop MCBSP DMA0 */
|
|
audiohw_stop();
|
|
DMSFC0 = 2 << 12 | 1 << 11;
|
|
sdem_level=0;
|
|
return;
|
|
}
|
|
|
|
if(dsp_level==DSP_BUFFER_SIZE || sdem_level==sdem_dsp_size)
|
|
{
|
|
if(dma0_stopped==2) /* Pause */
|
|
{
|
|
DMPREC&=0xFFFE; /* Stop MCBSP DMA0 */
|
|
audiohw_stop();
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* If the sdem_level is equal to the buffer size the ARM code gave
|
|
* (sdem_dsp_size) then reset the size and ask the arm for another buffer
|
|
*/
|
|
if(sdem_level==sdem_dsp_size)
|
|
{
|
|
sdem_level=0;
|
|
|
|
/* Get a new buffer (location and size) from ARM */
|
|
status.msg = MSG_REFILL;
|
|
waiting=1;
|
|
|
|
startack();
|
|
}
|
|
|
|
if(!waiting)
|
|
{
|
|
/* Size is in bytes (but forced 32 bit transfers */
|
|
if( (dsp_level + (sdem_dsp_size - sdem_level) ) > DSP_BUFFER_SIZE)
|
|
{
|
|
last_size = DSP_BUFFER_SIZE-dsp_level;
|
|
}
|
|
else
|
|
{
|
|
last_size = sdem_dsp_size-sdem_level;
|
|
}
|
|
|
|
/* DSP addresses are 16 bit (word) */
|
|
DSP_ADDRL = (unsigned short)data + (dma0_unlocked >> 1) + (dsp_level>>1);
|
|
DSP_ADDRH = 0;
|
|
|
|
/* SDRAM addresses are 8 bit (byte)
|
|
* Warning: These addresses are forced to 32 bit alignment!
|
|
*/
|
|
sdem_addr = ((unsigned long)sdem_addrh << 16 | sdem_addrl) + sdem_level;
|
|
SDEM_ADDRL = sdem_addr & 0xffff;
|
|
SDEM_ADDRH = sdem_addr >> 16;
|
|
|
|
/* Set the size of the SDRAM to SARAM transfer (demac transfer) */
|
|
DMA_SIZE = last_size;
|
|
|
|
DMA_CTRL = 0;
|
|
|
|
/* These are just debug signals that are not used/needed right now */
|
|
status.payload.refill._DMA_TRG = DMA_TRG;
|
|
status.payload.refill._SDEM_ADDRH = SDEM_ADDRH;
|
|
status.payload.refill._SDEM_ADDRL = SDEM_ADDRL;
|
|
status.payload.refill._DSP_ADDRH = DSP_ADDRH;
|
|
status.payload.refill._DSP_ADDRL = DSP_ADDRL;
|
|
|
|
/* Start the demac transfer */
|
|
DMA_TRG = 1;
|
|
}
|
|
}
|
|
|
|
/* This interupt handler is for the SARAM (on DSP) to McBSP IIS DMA transfer.
|
|
* It interupts at 1/2 empty and empty so that we can start filling a new buffer
|
|
* from SDRAM when a half is free. dsp_level should always be full when this
|
|
* interupt occurs except for the initial start.
|
|
*/
|
|
interrupt void handle_dma0(void)
|
|
{
|
|
/* Byte offset to half-buffer locked by DMA0.
|
|
0 for top, PCM_SIZE/2 for bottom */
|
|
unsigned short dma0_locked;
|
|
|
|
IFR = 1 << 6;
|
|
|
|
/* DMSRC0 is the beginning of the DMA0-locked SARAM half-buffer. */
|
|
DMSA = 0x00 /* DMSRC0 */;
|
|
dma0_locked = (DMSDN << 1) & (DSP_BUFFER_SIZE);
|
|
dma0_unlocked = dma0_locked ^ (DSP_BUFFER_SIZE);
|
|
|
|
dsp_level = 0;
|
|
|
|
/* Start the SDRAM to SARAM copy */
|
|
rebuffer();
|
|
}
|
|
|
|
/* This interupt handler runs every time a DMA transfer is complete from SDRAM
|
|
* to the SARAM buffer. It is used to update the SARAM buffer level
|
|
* (dsp_level), the SDRAM buffer level (sdem_level) and to rebuffer if the dsp
|
|
* buffer is not full.
|
|
*/
|
|
interrupt void handle_dmac(void) {
|
|
IFR = 1 << 11;
|
|
|
|
dsp_level+=last_size;
|
|
sdem_level+=last_size;
|
|
|
|
if(dsp_level<DSP_BUFFER_SIZE)
|
|
{
|
|
rebuffer();
|
|
}
|
|
}
|
|
|
|
void dma_init(void) {
|
|
/* Configure SARAM to McBSP DMA */
|
|
|
|
/* Event XEVT0, 32-bit transfers, 0 frame count */
|
|
DMSFC0 = 2 << 12 | 1 << 11;
|
|
|
|
/* Interrupts generated, Half and full buffer.
|
|
* ABU mode, From data space with postincrement, to data space with no
|
|
* change
|
|
*/
|
|
DMMCR0 = 1 << 14 | 1 << 13 |
|
|
1 << 12 | 1 << 8 | 1 << 6 | 1;
|
|
|
|
/* Set the source (incrementing) location */
|
|
DMSRC0 = (unsigned short)&data;
|
|
|
|
/* Set the destination (static) location to the McBSP IIS interface */
|
|
DMDST0 = (unsigned short)&DXR20;
|
|
|
|
/* Set the size of the buffer */
|
|
DMCTR0 = sizeof(data);
|
|
|
|
/* Setup DMA0 interrupts and start the transfer */
|
|
DMPREC = 2 << 6;
|
|
}
|