658026e626
Note: I left behind lcd_bitmap in features.txt, because removing it would require considerable work in the manual and the translations. Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
130 lines
3.3 KiB
C
130 lines
3.3 KiB
C
/*
|
|
* This config file is for the Sansa C100 series
|
|
*/
|
|
|
|
#define MODEL_NAME "Sandisk Sansa c100 series"
|
|
|
|
/* For Rolo and bootloader */
|
|
#define MODEL_NUMBER 30
|
|
|
|
/* define hardware samples rate caps mask */
|
|
#define HW_SAMPR_CAPS (/*SAMPR_CAP_88 | */SAMPR_CAP_44/* | SAMPR_CAP_22 | SAMPR_CAP_11*/)
|
|
|
|
|
|
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you can flip your LCD */
|
|
/*#define HAVE_LCD_FLIP*/
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
/*#define HAVE_LCD_INVERT*/
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* define this if you have a flash memory storage */
|
|
#define HAVE_FLASH_STORAGE
|
|
|
|
/* Only v1 */
|
|
#define CONFIG_STORAGE STORAGE_NAND
|
|
#define CONFIG_NAND NAND_TCC
|
|
|
|
/* c100's with direct-to-NAND access are FAT16 */
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 128
|
|
#define LCD_HEIGHT 64
|
|
/* sqrt(128^2 + 64^2) / 1.7 = 84.2 */
|
|
#define LCD_DPI 84
|
|
#define LCD_DEPTH 16 /* 65536 colours */
|
|
#define LCD_PIXELFORMAT RGB565 /*rgb565*/
|
|
|
|
/*#define LCD_PIXELFORMAT VERTICAL_PACKING*/
|
|
|
|
/* define this to indicate your device's keypad */
|
|
#define CONFIG_KEYPAD SANSA_C100_PAD
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_TCC77X
|
|
|
|
/* define this if you have RTC RAM available for settings */
|
|
//#define HAVE_RTC_RAM
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x50000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x50000
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
|
|
|
|
|
|
|
|
/* Define this if you have the TLV320 audio codec */
|
|
#define HAVE_TLV320
|
|
|
|
/*#define CONFIG_TUNER TEA5767*/
|
|
|
|
/* TLV320 has no tone controls, so we use the software ones */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
#define CONFIG_I2C I2C_TCC77X
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 540 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 540 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 540 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* define this if the unit should not shut down on low battery. */
|
|
#define NO_LOW_BATTERY_SHUTDOWN
|
|
|
|
/* Define this if you have a TCC770 */
|
|
#define CONFIG_CPU TCC770
|
|
|
|
/* Define this if you have ATA power-off control */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 120000000
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* The start address index for ROM builds */
|
|
/* #define ROM_START 0x11010 for behind original Archos */
|
|
#define ROM_START 0x7010 /* for behind BootBox */
|
|
|
|
#define CONFIG_LCD LCD_S6B33B2
|
|
|
|
#define BOOTFILE_EXT "c100"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#ifdef BOOTLOADER
|
|
#define TCCBOOT
|
|
#endif
|
|
|
|
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|