rockbox/bootloader/telechips.c
Rob Purchase 5991478628 Read ID codes & raw page data from D2 NAND flash (work in progress;
no logical->physical address translation yet)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16167 a1c6a512-1295-4272-9138-f99709370657
2008-01-25 21:37:59 +00:00

154 lines
3.8 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Dave Chapman
*
* Based on Rockbox iriver bootloader by Linus Nielsen Feltzing
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include "cpu.h"
#include "system.h"
#include "lcd.h"
#include "kernel.h"
#include "thread.h"
#include "ata.h"
#include "fat.h"
#include "disk.h"
#include "font.h"
#include "button.h"
#include "adc.h"
#include "adc-target.h"
#include "backlight-target.h"
#include "panic.h"
#include "power.h"
#include "file.h"
#include "common.h"
#if defined(COWON_D2)
#include "i2c.h"
#endif
char version[] = APPSVERSION;
extern int line;
void* main(void)
{
int button;
int power_count = 0;
int count = 0;
int i;
bool do_power_off = false;
system_init();
adc_init();
lcd_init();
font_init();
#if defined(COWON_D2)
lcd_enable(true);
#endif
_backlight_on();
#if defined(COWON_D2)
ata_init();
#endif
while(!do_power_off) {
line = 0;
printf("Hello World!");
button = button_read_device();
/* Power-off if POWER button has been held for a long time
This loop is currently running at about 100 iterations/second
*/
if (button & POWEROFF_BUTTON) {
power_count++;
if (power_count > 200)
do_power_off = true;
} else {
power_count = 0;
}
printf("Btn: 0x%08x",button);
#if defined(COWON_D2)
printf("GPIOA: 0x%08x",GPIOA);
printf("GPIOB: 0x%08x",GPIOB);
printf("GPIOC: 0x%08x",GPIOC);
printf("GPIOD: 0x%08x",GPIOD);
printf("GPIOE: 0x%08x",GPIOE);
for (i = 0; i<4; i++)
{
printf("ADC%d: 0x%04x",i,adc_read(i));
}
/* TODO: Establish how the touchscreen driver is going to work.
Since it needs I2C read/write, it can't easily go on a tick task */
{
unsigned char buf[] = { 0x2f, (0xE<<1) | 1, /* ADC start for X+Y */
0, 0, 0 };
int x,y;
i2c_write(0x10, buf, 2);
i2c_readmem(0x10, 0x2e, buf, 5);
x = (buf[2] << 2) | (buf[3] & 3);
y = (buf[4] << 2) | ((buf[3] & 0xC) >> 2);
printf("X: 0x%03x Y: 0x%03x",x,y);
buf[0] = 0x2f;
buf[1] = (0xF<<1) | 1; /* ADC start for P1+P2 */
i2c_write(0x10, buf, 2);
i2c_readmem(0x10, 0x2e, buf, 5);
x = (buf[2] << 2) | (buf[3] & 3);
y = (buf[4] << 2) | ((buf[3] & 0xC) >> 2);
printf("P1: 0x%03x P2: 0x%03x",x,y);
}
#endif
count++;
printf("Count: %d",count);
}
lcd_clear_display();
line = 0;
printf("POWER-OFF");
#if defined(COWON_D2)
lcd_enable(false);
#endif
/* TODO: Power-off */
while(1);
return 0;
}
/* These functions are present in the firmware library, but we reimplement
them here because the originals do a lot more than we want */
void usb_acknowledge(void)
{
}
void usb_wait_for_disconnect(void)
{
}