311 lines
9.8 KiB
C
311 lines
9.8 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (c) 2013 by Amaury Pouly
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include <sys/types.h> /* off_t */
|
|
#include <string.h>
|
|
#include "cpu.h"
|
|
#include "system.h"
|
|
#include "backlight-target.h"
|
|
#include "lcd.h"
|
|
#include "lcdif-imx233.h"
|
|
#include "clkctrl-imx233.h"
|
|
#include "pinctrl-imx233.h"
|
|
#include "logf.h"
|
|
|
|
#ifdef HAVE_LCD_ENABLE
|
|
static bool lcd_on;
|
|
#endif
|
|
static int lcd_model;
|
|
|
|
static inline uint32_t encode_16_to_18(uint32_t a)
|
|
{
|
|
return ((a & 0xff) << 1) | (((a >> 8) & 0xff) << 10);
|
|
}
|
|
|
|
static void lcd_write_reg(uint32_t reg, uint32_t data)
|
|
{
|
|
uint32_t old_reg = reg;
|
|
/* get back to 18-bit word length */
|
|
imx233_lcdif_set_word_length(18);
|
|
reg = encode_16_to_18(reg);
|
|
data = encode_16_to_18(data);
|
|
|
|
imx233_lcdif_pio_send(false, 1, ®);
|
|
if(old_reg != 0x22)
|
|
imx233_lcdif_pio_send(true, 1, &data);
|
|
}
|
|
|
|
static void lcd_init_seq(void)
|
|
{
|
|
if(lcd_model == 0)
|
|
{
|
|
lcd_write_reg(0xe3, 0x3008);
|
|
lcd_write_reg(0xe7, 0x12);
|
|
lcd_write_reg(0xef, 0x1231);
|
|
lcd_write_reg(0x01, 0x100);
|
|
lcd_write_reg(0x02, 0x700);
|
|
lcd_write_reg(0x03, 0x1028);
|
|
lcd_write_reg(0x04, 0);
|
|
lcd_write_reg(0x08, 0x207);
|
|
lcd_write_reg(0x09, 0);
|
|
lcd_write_reg(0x0a, 0);
|
|
lcd_write_reg(0x0c, 0);
|
|
lcd_write_reg(0x0d, 0);
|
|
lcd_write_reg(0x0f, 0);
|
|
lcd_write_reg(0x10, 0);
|
|
lcd_write_reg(0x11, 7);
|
|
lcd_write_reg(0x12, 0);
|
|
lcd_write_reg(0x13, 0);
|
|
mdelay(200);
|
|
lcd_write_reg(0x10, 0x1490);
|
|
lcd_write_reg(0x11, 0x227);
|
|
mdelay(50);
|
|
lcd_write_reg(0x12, 0x9c);
|
|
mdelay(50);
|
|
lcd_write_reg(0x13, 0xc00);
|
|
lcd_write_reg(0x29, 5);
|
|
lcd_write_reg(0x2b, 0xc);
|
|
lcd_write_reg(0x20, 0xef);
|
|
lcd_write_reg(0x21, 0);
|
|
lcd_write_reg(0x30, 6);
|
|
lcd_write_reg(0x31, 0x703);
|
|
lcd_write_reg(0x32, 0x206);
|
|
lcd_write_reg(0x35, 4);
|
|
lcd_write_reg(0x36, 0x1a05);
|
|
lcd_write_reg(0x37, 0x600);
|
|
lcd_write_reg(0x38, 0x307);
|
|
lcd_write_reg(0x39, 0x707);
|
|
lcd_write_reg(0x3c, 0x400);
|
|
lcd_write_reg(0x3d, 0x50f);
|
|
lcd_write_reg(0x50, 0);
|
|
lcd_write_reg(0x51, 0xef);
|
|
lcd_write_reg(0x52, 0);
|
|
lcd_write_reg(0x53, 0x13f);
|
|
lcd_write_reg(0x60, 0xa700);
|
|
lcd_write_reg(0x61, 1);
|
|
lcd_write_reg(0x6a, 0);
|
|
lcd_write_reg(0x80, 0);
|
|
lcd_write_reg(0x81, 0);
|
|
lcd_write_reg(0x82, 0);
|
|
lcd_write_reg(0x83, 0);
|
|
lcd_write_reg(0x84, 0);
|
|
lcd_write_reg(0x85, 0);
|
|
lcd_write_reg(0x90, 0x10);
|
|
lcd_write_reg(0x92, 0x600);
|
|
lcd_write_reg(0x07, 0x133);
|
|
}
|
|
else
|
|
{
|
|
lcd_write_reg(0x01, 0x100);
|
|
lcd_write_reg(0x02, 0x700);
|
|
lcd_write_reg(0x03, 0x1028);
|
|
lcd_write_reg(0x04, 0);
|
|
lcd_write_reg(0x08, 0x207);
|
|
lcd_write_reg(0x09, 0);
|
|
lcd_write_reg(0x0a, 0);
|
|
lcd_write_reg(0x0c, 0);
|
|
lcd_write_reg(0x0d, 0);
|
|
lcd_write_reg(0x0f, 0);
|
|
lcd_write_reg(0x10, 0);
|
|
lcd_write_reg(0x11, 7);
|
|
lcd_write_reg(0x12, 0);
|
|
lcd_write_reg(0x13, 0);
|
|
mdelay(200);
|
|
lcd_write_reg(0x10, 0x1290);
|
|
lcd_write_reg(0x11, 0x227);
|
|
mdelay(50);
|
|
lcd_write_reg(0x12, 0x9c);
|
|
mdelay(50);
|
|
lcd_write_reg(0x13, 0x1f00);
|
|
lcd_write_reg(0x29, 0x30);
|
|
lcd_write_reg(0x2b, 0xd);
|
|
lcd_write_reg(0x20, 0xef);
|
|
lcd_write_reg(0x21, 0);
|
|
lcd_write_reg(0x30, 0x404);
|
|
lcd_write_reg(0x31, 0x404);
|
|
lcd_write_reg(0x32, 0x404);
|
|
lcd_write_reg(0x37, 0x303);
|
|
lcd_write_reg(0x38, 0x303);
|
|
lcd_write_reg(0x39, 0x303);
|
|
lcd_write_reg(0x35, 0x103);
|
|
lcd_write_reg(0x3c, 0x301);
|
|
lcd_write_reg(0x36, 0x1e00);
|
|
lcd_write_reg(0x3d, 0xf);
|
|
lcd_write_reg(0x50, 0);
|
|
lcd_write_reg(0x51, 0xef);
|
|
lcd_write_reg(0x52, 0);
|
|
lcd_write_reg(0x53, 0x13f);
|
|
lcd_write_reg(0x60, 0xa700);
|
|
lcd_write_reg(0x61, 0);
|
|
lcd_write_reg(0x6a, 0);
|
|
lcd_write_reg(0x80, 0);
|
|
lcd_write_reg(0x81, 0);
|
|
lcd_write_reg(0x82, 0);
|
|
lcd_write_reg(0x83, 0);
|
|
lcd_write_reg(0x84, 0);
|
|
lcd_write_reg(0x85, 0);
|
|
lcd_write_reg(0x2b, 0xd);
|
|
mdelay(50);
|
|
lcd_write_reg(0x90, 0x17);
|
|
lcd_write_reg(0x92, 0);
|
|
lcd_write_reg(0x93, 3);
|
|
lcd_write_reg(0x95, 0x110);
|
|
lcd_write_reg(0x97, 0);
|
|
lcd_write_reg(0x98, 0);
|
|
lcd_write_reg(0x07, 0x133);
|
|
}
|
|
}
|
|
|
|
void lcd_init_device(void)
|
|
{
|
|
/* clock at 24MHZ */
|
|
imx233_clkctrl_enable(CLK_PIX, false);
|
|
imx233_clkctrl_set_div(CLK_PIX, 1);
|
|
imx233_clkctrl_set_bypass(CLK_PIX, true); /* use XTAL */
|
|
imx233_clkctrl_enable(CLK_PIX, true);
|
|
imx233_lcdif_init();
|
|
imx233_lcdif_set_lcd_databus_width(18);
|
|
imx233_lcdif_enable_underflow_recover(true);
|
|
imx233_lcdif_setup_system_pins(18);
|
|
imx233_lcdif_set_timings(2, 2, 2, 2);
|
|
|
|
imx233_pinctrl_acquire(2, 8, "lcd_model");
|
|
imx233_pinctrl_set_function(2, 8, PINCTRL_FUNCTION_GPIO);
|
|
imx233_pinctrl_enable_gpio(2, 8, false);
|
|
lcd_model = imx233_pinctrl_get_gpio(2, 8);
|
|
|
|
// reset device
|
|
imx233_lcdif_reset_lcd(true);
|
|
mdelay(50);
|
|
imx233_lcdif_reset_lcd(false);
|
|
mdelay(10);
|
|
imx233_lcdif_reset_lcd(true);
|
|
|
|
lcd_init_seq();
|
|
#ifdef HAVE_LCD_ENABLE
|
|
lcd_on = true;
|
|
#endif
|
|
}
|
|
|
|
#ifdef HAVE_LCD_ENABLE
|
|
bool lcd_active(void)
|
|
{
|
|
return lcd_on;
|
|
}
|
|
|
|
static void lcd_enable_seq(bool enable)
|
|
{
|
|
if(!enable)
|
|
{
|
|
}
|
|
else
|
|
{
|
|
}
|
|
}
|
|
|
|
void lcd_enable(bool enable)
|
|
{
|
|
if(lcd_on == enable)
|
|
return;
|
|
|
|
lcd_on = enable;
|
|
|
|
lcd_enable_seq(enable);
|
|
if(enable)
|
|
send_event(LCD_EVENT_ACTIVATION, NULL);
|
|
}
|
|
#endif
|
|
|
|
void lcd_update(void)
|
|
{
|
|
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
|
|
}
|
|
|
|
/* NOTE the LCD is rotated: it's a 240x320 panel with (0,0) being the bottom-left
|
|
* corner when the player is hold in landscape mode. This means x and y axis and
|
|
* exchanged and the y axis is reversed. */
|
|
|
|
void lcd_update_rect(int x, int y, int w, int h)
|
|
{
|
|
#ifdef HAVE_LCD_ENABLE
|
|
if(!lcd_on)
|
|
return;
|
|
#endif
|
|
/* make sure the rectangle is included in the screen */
|
|
x = MIN(x, LCD_WIDTH);
|
|
y = MIN(y, LCD_HEIGHT);
|
|
w = MIN(w, LCD_WIDTH - x);
|
|
h = MIN(h, LCD_HEIGHT - y);
|
|
|
|
imx233_lcdif_wait_ready();
|
|
lcd_write_reg(0x50, LCD_HEIGHT - y - h);
|
|
lcd_write_reg(0x51, LCD_HEIGHT - y - 1);
|
|
lcd_write_reg(0x52, x);
|
|
lcd_write_reg(0x53, x + w - 1);
|
|
lcd_write_reg(0x20, LCD_HEIGHT - y - 1);
|
|
lcd_write_reg(0x21, x);
|
|
lcd_write_reg(0x22, 0);
|
|
imx233_lcdif_wait_ready();
|
|
imx233_lcdif_set_word_length(16);
|
|
imx233_lcdif_set_byte_packing_format(0xf); /* two pixels per 32-bit word */
|
|
|
|
/* there are two cases here:
|
|
* - either width = LCD_WIDTH and we can directly memcopy a part of lcd_framebuffer to FRAME
|
|
* and send it
|
|
* - either width != LCD_WIDTH and we have to build a contiguous copy of the rectangular area
|
|
* into FRAME before sending it (which is slower and doesn't use the hardware)
|
|
* In all cases, FRAME just acts as a temporary buffer.
|
|
* NOTE It's more interesting to do a copy to FRAME in all cases since in system mode
|
|
* the clock runs at 24MHz which provides barely 10MB/s bandwidth compared to >100MB/s
|
|
* for memcopy operations
|
|
*/
|
|
if(w == LCD_WIDTH)
|
|
{
|
|
memcpy((void *)FRAME, FBADDR(x,y), w * h * sizeof(fb_data));
|
|
}
|
|
else
|
|
{
|
|
for(int i = 0; i < h; i++)
|
|
memcpy((fb_data *)FRAME + i * w, FBADDR(x,y + i), w * sizeof(fb_data));
|
|
}
|
|
/* WARNING The LCDIF has a limitation on the vertical count ! In 16-bit packed mode
|
|
* (which we used, ie 16-bit per pixel, 2 pixels per 32-bit words), the v_count
|
|
* field must be a multiple of 2. Furthermore, it seems the lcd controller doesn't
|
|
* really like when both w and h are even, probably because the writes to the GRAM
|
|
* are done on several words and the controller requires dummy writes.
|
|
* The workaround is to always make sure that we send a number of pixels which is
|
|
* a multiple of 4 so that both the lcdif and the controller are happy. If any
|
|
* of w or h is odd, we will send a copy of the first pixels as dummy writes. We will
|
|
* send at most 3 bytes. We then send (w * h + 3) / 4 x 4 bytes.
|
|
*/
|
|
if(w % 2 == 1 || h % 2 == 1)
|
|
{
|
|
/* copy three pixel after the last one */
|
|
for(int i = 0; i < 3; i++)
|
|
*((fb_data *)FRAME + w * h + i) = *((fb_data *)FRAME + i);
|
|
/* WARNING we need to update w and h to reflect the pixel count BUT it
|
|
* has no relation to w * h (it can even be 2 * prime). Hopefully, w <= 240 and
|
|
* h <= 320 so w * h <= 76800 and (w * h + 3) / 4 <= 38400 which fits into
|
|
* a 16-bit integer (horizontal count). */
|
|
h = (w * h + 3) / 4;
|
|
w = 4;
|
|
}
|
|
imx233_lcdif_dma_send((void *)FRAME_PHYS_ADDR, w, h);
|
|
}
|