rockbox/firmware/target/arm/s5l8700/dma-s5l8700.c
Thomas Martitz 467999ac9c Remove svn:executable from these files.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21797 a1c6a512-1295-4272-9138-f99709370657
2009-07-12 09:16:55 +00:00

119 lines
3.7 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright © 2009 Bertrik Sikken
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "s5l8700.h"
#include "dma-target.h"
#include "panic.h"
#include "system.h"
/* Driver for the IODMA part of the s5l8700
When requesting a DMA transfer the supplied callback is stored and called
upon completion of the DMA transfer (callback runs in interrupt context).
*/
#define DMAC_BASE 0x38400000
#define DMABASE(c) (*(volatile unsigned int*)(DMAC_BASE+0x00+(0x20*c)))
#define DMACON(c) (*(volatile unsigned int*)(DMAC_BASE+0x04+(0x20*c)))
#define DMATCNT(c) (*(volatile unsigned int*)(DMAC_BASE+0x08+(0x20*c)))
#define DMACADDR(c) (*(volatile unsigned int*)(DMAC_BASE+0x0C+(0x20*c)))
#define DMACTCNT(c) (*(volatile unsigned int*)(DMAC_BASE+0x10+(0x20*c)))
#define DMACOM(c) (*(volatile unsigned int*)(DMAC_BASE+0x14+(0x20*c)))
#define DMANOFF(c) (*(volatile unsigned int*)(DMAC_BASE+0x18+(0x20*c)))
#define DMACOM_HOLD 2 /* only allowed on channel 0 */
#define DMACOM_SKIP 3 /* only allowed on channel 0 */
#define DMACOM_CHAN_ON 4
#define DMACOM_CHAN_OFF 5
#define DMACOM_CLEAR_HCOM 6
#define DMACOM_CLEAR_HCOM_WCOM 7
/* one completion callback for each channel */
static void (*dma_callback[4])(void);
void dma_init(void)
{
int i;
for (i = 0; i < 4; i++) {
dma_callback[i] = NULL;
dma_disable_channel(i);
}
INTMSK |= (1 << 10);
}
/* setup a DMA transfer, but do not start it yet */
void dma_setup_channel(int channel, int sel, int dir, int dsize, int blen,
void *addr, size_t size, void (*callback)(void))
{
dma_callback[channel] = callback;
DMACON(channel) = (sel << 30) | /* DEVSEL */
(dir << 29) | /* DIR */
(0 << 24) | /* SCHCNT */
(dsize << 22) | /* DSIZE */
(blen << 19) | /* BLEN */
(0 << 18) | /* RELOAD */
(0 << 17) | /* HCOMINT */
(1 << 16) | /* WCOMINT */
(0 << 0); /* OFFSET */
DMABASE(channel) = (unsigned int)addr;
DMATCNT(channel) = size - 1;
}
void dma_enable_channel(int channel)
{
DMACOM(channel) = DMACOM_CHAN_ON;
}
void dma_disable_channel(int channel)
{
DMACOM(channel) = DMACOM_CHAN_OFF;
}
/* interrupt handler for all DMA channels */
void INT_DMA(void)
{
unsigned int mask;
int channel;
mask = (1 << 0) | /* WCOMx interrupt bit */
(1 << 1); /* HCOMx interrupt bit */
for (channel = 0; channel < 4; channel++) {
if (DMAALLST & mask) {
/* clear half and whole completion bits */
DMACOM(channel) = DMACOM_CLEAR_HCOM_WCOM;
if (dma_callback[channel]) {
dma_callback[channel]();
}
}
mask <<= 4;
}
}