Karl Kurbjun 670559f868 Make sure that the IDE power pin is properly initialized ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13389 a1c6a512-1295-4272-9138-f99709370657		2007-05-15 00:22:51 +00:00
..
adc-meg-fx.c
adc-target.h
ata-meg-fx.c	Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized.	2007-05-07 19:34:34 +00:00
ata-target.h
backlight-meg-fx.c	Gigabeat Button/Backlight update: Reduce the number of writes to the sc606 when control registers are not changing. Fix up some buttonlight bugs. Add in full sc606 initialization during the backlight init.	2007-05-14 05:04:21 +00:00
backlight-target.h	More Gigabeat button light fixes. Settings now work properly, startup does not cause the button lights to flash when disabled. Buttonlights are now shutdown on power off.	2007-05-10 03:08:47 +00:00
button-meg-fx.c	Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized.	2007-05-07 19:34:34 +00:00
button-target.h
dma_start.c
i2c-meg-fx.c
i2c-meg-fx.h
kernel-meg-fx.c
lcd-as-meg-fx.S
lcd-meg-fx.c
lcd-target.h
mmu-meg-fx.c
mmu-meg-fx.h
pcm-meg-fx.c	Gigabeat: Remove the 8kHz for now because it doesn't seem to work too well. Also, HW_SAMPR_CAPS should always be defined for sim and target.	2007-05-04 15:21:24 +00:00
power-meg-fx.c	Make sure that the IDE power pin is properly initialized	2007-05-15 00:22:51 +00:00
sc606-meg-fx.c	revert the last changes because they prevent some Gigabeats from shutting down	2007-05-11 16:42:53 +00:00
sc606-meg-fx.h
system-meg-fx.c	Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized.	2007-05-07 19:34:34 +00:00
system-target.h
usb-meg-fx.c	Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized.	2007-05-07 19:34:34 +00:00
usb-target.h
wmcodec-meg-fx.c	No more ear doctor visits after powering/unpowering the Gigabeat. Cleanup a little too.	2007-05-03 18:08:00 +00:00