Michael Sevakis ff25b3a208 ata: do some threading-related corrections (some sync related where it matters). Make sure 'sleeping' is 'false' before the powerup sequence (throws-off powermgmt and it *is* about to woken again and powermgmt will need to compensate). Avoid looking at mutex flag directly; there's no tangible benefit I can discern and changes to the kernel that alter the meaning shouldn't be able to break anything. For that, in the jz sd driver, have sd_disk_is_active just return 'false' like all the other SD drivers do. If it *must* return this, it should implement it's own method but it seems to not matter. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26234 a1c6a512-1295-4272-9138-f99709370657		2010-05-21 15:33:31 +00:00
..
onda_vx747	Onda VX747/VX777: update battery charge cycle	2010-01-03 16:55:18 +00:00
onda_vx767	Fix Onda VX767	2009-11-26 17:22:32 +00:00
app.lds	Onda VX747/VX777: cleanup linker files a bit	2010-01-03 16:34:56 +00:00
ata-nand-jz4740.c
ata-nand-target.h
ata-sd-jz4740.c	ata: do some threading-related corrections (some sync related where it matters). Make sure 'sleeping' is 'false' before the powerup sequence (throws-off powermgmt and it *is* about to woken again and powermgmt will need to compensate). Avoid looking at mutex flag directly; there's no tangible benefit I can discern and changes to the kernel that alter the meaning shouldn't be able to break anything. For that, in the jz sd driver, have sd_disk_is_active just return 'false' like all the other SD drivers do. If it *must* return this, it should implement it's own method but it seems to not matter.	2010-05-21 15:33:31 +00:00
backlight-target.h
boot.lds
codec-jz4740.c	Hopefully finish off the red from r26051.	2010-05-15 14:16:35 +00:00
crt0.S
debug-jz4740.c
debug-target.h
dma_acc-jz4740.c
fmradio-i2c-jz4740.c
i2c-jz4740.c	Onda VX747/VX777: fix not closing I²C all times	2010-01-03 17:32:11 +00:00
kernel-jz4740.c
lcd-jz4740.c	Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).	2010-05-06 21:04:40 +00:00
lcd-target.h	Onda VX747/VX777: centralise LCD clock en-/disabling.	2010-01-03 16:28:15 +00:00
pcm-jz4740.c	PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to be handled there. Driver can just return current pointer for recording peaks. A new define, HAVE_PCM_REC_DMA_ADDRESS, specifies that physical addresses are being used for recording and translation is needed before starting a new block. The drivers need not worry about aligning start and size nor should care if either will be zero. All this will be checked in the logical layer first.	2010-05-12 14:05:36 +00:00
system-jz4740.c	Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).	2010-05-06 21:04:40 +00:00
system-target.h
timer-jz4740.c
usb-jz4740.c	Ingenic Jz4740: eliminate EP0 state machine + small cleanups	2010-05-03 20:36:34 +00:00