rockbox/apps/features.txt
Solomon Peachy 658026e626 [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice.
Note:  I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.

Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
2020-07-24 21:20:13 +00:00

273 lines
4.1 KiB
Text

/* This file controls which strings are included when rockbox is built and
when the .lng and .voice files are built. That means that a change in this
file will break compatibility with older .lng and .voice files and that those
version numbers should be updated. It also means that changing defines in
the various config*.h files could also break back compatibility */
#if defined(HAVE_ACCESSORY_SUPPLY)
accessory_supply
#endif
#if defined(HAVE_AGC)
agc
#endif
#if defined(HAVE_RTC_ALARM)
alarm
#endif
#if defined(HAVE_BACKLIGHT_BRIGHTNESS)
backlight_brightness
#endif
#if BATTERY_TYPES_COUNT > 1
battery_types
#endif
#if defined(HAVE_BUTTON_LIGHT)
button_light
#endif
#if defined(HAVE_BUTTONLIGHT_BRIGHTNESS)
buttonlight_brightness
#endif
#if defined(HAVE_CROSSFADE)
crossfade
#endif
#if defined(HAVE_DIRCACHE)
dircache
#endif
#if defined(HAVE_FLASH_STORAGE)
flash_storage
#endif
#if defined(HAVE_HEADPHONE_DETECTION)
headphone_detection
#endif
#if defined(HAVE_LINEOUT_DETECTION)
lineout_detection
#endif
#if defined(HAS_BUTTON_HOLD)
hold_button
#endif
#if defined(HAVE_HOTKEY)
hotkey
#endif
lcd_bitmap
#if LCD_DEPTH > 1
lcd_non-mono
#endif
#if defined(HAVE_LCD_COLOR)
lcd_color
#endif
#if defined(HAVE_LCD_INVERT)
lcd_invert
#endif
#if defined(HAVE_LCD_SLEEP)
lcd_sleep
#endif
#if defined(HAVE_MORSE_INPUT)
morse_input
#endif
#if defined(HAVE_PITCHCONTROL)
pitchscreen
#endif
#if defined(HAVE_MULTIVOLUME)
multivolume
#endif
#if defined(HAVE_MULTIDRIVE) && defined(USB_ENABLE_STORAGE)
multidrive_usb
#endif
#if defined(HAVE_QUICKSCREEN)
quickscreen
#endif
#if CONFIG_TUNER != 0
radio
#ifdef HAVE_REMOTE_LCD
radio_remote
#endif
#endif
#if defined(HAVE_RECORDING)
recording
recording_swcodec
#if defined(HAVE_LINE_IN)
recording_linein
#endif
#if defined(HAVE_MIC_IN)
recording_mic
#endif
#endif
#if defined(HAVE_HISTOGRAM)
histogram
#endif
#if defined(HAVE_REMOTE_LCD)
remote
remote_lcd_invert
#endif
#if defined(HAVE_REMOTE_LCD_TICKING)
remote_ticking
#endif
#if CONFIG_RTC
rtc
#endif
#if defined(IPOD_ACCESSORY_PROTOCOL)
serial_port
#endif
#if defined(HAVE_SPDIF_POWER)
spdif_power
#endif
#if defined(HAVE_SPEAKER)
speaker
#endif
swcodec
#if defined(HAVE_TAGCACHE)
tagcache
#endif
#if defined(HAVE_TC_RAMCACHE)
tc_ramcache
#endif
#if CONFIG_CHARGING
charging
#if defined(HAVE_USB_CHARGING_ENABLE)
usb_charging_enable
#endif
#endif
#if defined(HAVE_WHEEL_ACCELERATION)
wheel_acceleration
#endif
#if defined(HAVE_LINEOUT_POWEROFF)
lineout_poweroff
#endif
#if defined(HAVE_TOUCHSCREEN)
touchscreen
#endif
#if defined(HAVE_TOUCHPAD_DEADZONE)
touchpad_deadzone
#endif
#if defined(HAVE_IMX233_CODEC) || defined(HAVE_WM8750) || defined(HAVE_WM8978)
depth_3d
#endif
/* This should be AUDIOHW_HAVE_FILTER_ROLL_OFF but that is only defined later */
#if defined(DX50) || defined(HAVE_DF1704_CODEC) || defined(HAVE_PCM1792_CODEC) || defined(HAVE_CS4398) || defined(HAVE_WM8740) || defined(HAVE_ES9018)
filter_roll_off
#endif
#if defined(HAVE_ES9018)
es9018
#endif
/* These features are only used by the manual so they won't break binary
* compatibility
*/
#if (PLUGIN_BUFFER_SIZE >= 0x80000)
large_plugin_buffer
#endif
#if defined(AB_REPEAT_ENABLE) && !defined(ACTION_WPSAB_SINGLE)
ab_repeat_buttons
#endif
#if defined(HAVE_ALBUMART)
albumart
#endif
#if defined(HAVE_BACKLIGHT_FADING_INT_SETTING)
backlight_fade_int
#elif defined(HAVE_BACKLIGHT_FADING_BOOL_SETTING)
backlight_fade_bool
#endif
#if defined(HAVE_DISK_STORAGE)
disk_storage
#endif
#if defined(HAS_REMOTE_BUTTON_HOLD)
remote_button_hold
#endif
#if defined(HAVE_LCD_FLIP)
lcd_flip
#endif
#if defined(HAVE_LCD_CONTRAST)
lcd_contrast
#endif
#if defined(HAVE_SCROLLWHEEL)
scrollwheel
#endif
#if defined(HAVE_USB_POWER)
usb_power
#endif
#if defined(HAVE_USBSTACK)
usbstack
#endif
#if defined(USB_ENABLE_HID)
usb_hid
#if defined(HAVE_USB_HID_MOUSE)
usb_hid_mouse
#endif
#endif
#if defined(HAVE_SPDIF_IN)
recording_digital
#endif
#if MEMORYSIZE <= 2
lowmem
#endif
#if defined(HAVE_HARDWARE_CLICK)
hardware_click
#endif
#if defined(HAVE_PLAY_FREQ)
play_frequency
#endif
#if defined(HAVE_BOOTDATA)
boot_data
#endif
#if defined(HAVE_MULTIBOOT)
multi_boot
#endif