205 lines
5.8 KiB
C
205 lines
5.8 KiB
C
/*
|
|
* This config file is for Packard Bell Vibe 500
|
|
*/
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 67
|
|
|
|
#define MODEL_NAME "Packard Bell Vibe 500"
|
|
|
|
#define CONFIG_STORAGE STORAGE_ATA
|
|
|
|
/*define this if the ATA controller and method of USB access support LBA48 */
|
|
#define HAVE_LBA48
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
|
|
|
|
/* define the bitmask of hardware sample rates */
|
|
#define HW_SAMPR_CAPS (/*SAMPR_CAP_88 |*/ SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS (/*SAMPR_CAP_88 |*/ SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can ivert the colours on your LCD */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 160
|
|
#define LCD_HEIGHT 128
|
|
/* sqrt(160^2 + 128^2) / 1.8 = 113.8 */
|
|
#define LCD_DPI 114
|
|
#define LCD_DEPTH 16 /* 65536 colors */
|
|
#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 */
|
|
|
|
#ifndef BOOTLOADER
|
|
/* Define this if your LCD can be enabled/disabled */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
|
should be defined as well. */
|
|
#define HAVE_LCD_SLEEP
|
|
#define HAVE_LCD_SLEEP_SETTING
|
|
#endif
|
|
|
|
#define CONFIG_KEYPAD PBELL_VIBE500_PAD
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
|
|
|
|
|
|
/* define this if you have a real-time clock */
|
|
/* Philips 8563T - E8564 is a clone of it */
|
|
#define CONFIG_RTC RTC_E8564
|
|
#define HAVE_RTC_ALARM
|
|
|
|
/* define this if you have a disk storage, i.e. something
|
|
that needs spinups and can cause skips when shaked */
|
|
#define HAVE_DISK_STORAGE
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* Define the type of audio codec */
|
|
#define HAVE_WM8731
|
|
|
|
/* WM8731 has no tone controls, so we use the software ones */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 16
|
|
#define DEFAULT_BRIGHTNESS_SETTING 10
|
|
|
|
/* define this if you have a light associated with the buttons */
|
|
#define HAVE_BUTTON_LIGHT
|
|
#define HAVE_BUTTONLIGHT_BRIGHTNESS /* for compatibility */
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 1000 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 1500 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Hardware controlled charging, software can monitor plug and charge state */
|
|
#define CONFIG_CHARGING CHARGING_SIMPLE
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* Define this if you have a PortalPlayer PP5020 */
|
|
#define CONFIG_CPU PP5020
|
|
|
|
/* Define this if you want to use the PP5022 i2c interface */
|
|
#define CONFIG_I2C I2C_PP5020
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The start address index for ROM builds */
|
|
#define ROM_START 0x00000000
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x80000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 75000000
|
|
|
|
#define CONFIG_LCD LCD_VIBE500
|
|
|
|
/* Define this if your LCD can set contrast */
|
|
#define HAVE_LCD_CONTRAST
|
|
#define MIN_CONTRAST_SETTING 0
|
|
#define MAX_CONTRAST_SETTING 16
|
|
#define DEFAULT_CONTRAST_SETTING 10 /* OF */
|
|
|
|
/* We're able to shut off power to the HDD */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* Offset ( in the firmware file's header ) to the file length */
|
|
#define FIRMWARE_OFFSET_FILE_LENGTH 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_ARC
|
|
|
|
/* enable these for the experimental usb stack */
|
|
#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0x0409
|
|
#define USB_PRODUCT_ID 0x8038
|
|
#define HAVE_USB_HID_MOUSE
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
/* define this if the device has larger sectors when accessed via USB */
|
|
/* (only relevant in disk.c, fat.c now always supports large virtual sectors) */
|
|
/* #define MAX_LOG_SECTOR_SIZE 2048 */
|
|
|
|
/* define this if the hard drive uses large physical sectors (ATA-7 feature) */
|
|
/* and doesn't handle them in the drive firmware */
|
|
/* #define MAX_PHYS_SECTOR_SIZE 1024 */
|
|
|
|
#define MI4_FORMAT
|
|
#define BOOTFILE_EXT "mi4"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
/* DMA is used only for reading on PP502x because although reads are ~8x faster
|
|
* writes appear to be ~25% slower.
|
|
*/
|
|
#ifndef BOOTLOADER
|
|
#define HAVE_ATA_DMA
|
|
#endif
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|