Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/samsungyh820.h
Solomon Peachy 658026e626 [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 
Note:  I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.

Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
2020-07-24 21:20:13 +00:00

211 lines
5.8 KiB
C
Raw Blame History

/*
* This config file is for the Samsung YH-820
*/
/* For Rolo and boot loader */
#define MODEL_NUMBER 57
#define MODEL_NAME "Samsung YH-820"
/* define this if you have recording possibility */
#define HAVE_RECORDING
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN )
/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
SAMPR_CAP_11 | SAMPR_CAP_8)
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
SAMPR_CAP_11 | SAMPR_CAP_8)
/* Type of LCD */
#define CONFIG_LCD LCD_S6B33B2
/* LCD dimensions */
#define LCD_WIDTH 128
#define LCD_HEIGHT 96
/* sqrt(128^2 + 96^2) / 1.5 = 106.7 */
#define LCD_DPI 107
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565
/* LCD stays visible without backlight - simulator hint */
#define HAVE_TRANSFLECTIVE_LCD
#ifndef BOOTLOADER
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_E8564
/* TODO ??? */
//#define HAVE_RTC_ALARM
/* Define this if your LCD can be enabled/disabled */
/* #define HAVE_LCD_ENABLE */
/* Define this if your LCD can be put to sleep.
HAVE_LCD_ENABLE should be defined as well.
Note: with a transflective display, HAVE_LCD_ENABLE shouldn't be defined.
LCD gets disabled when setting to sleep. */
#define HAVE_LCD_SLEEP
#define HAVE_LCD_SLEEP_SETTING
/* The same code may also be used when shutting down */
#define HAVE_LCD_SHUTDOWN
#endif /* !BOOTLOADER */
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
/* Define this if your LCD can set contrast */
#define HAVE_LCD_CONTRAST
#define MIN_CONTRAST_SETTING 0
#define MAX_CONTRAST_SETTING 255
#define DEFAULT_CONTRAST_SETTING 137
/* define this if you can flip your LCD */
/* #define HAVE_LCD_FLIP */
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* put the lcd frame buffer in IRAM */
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR */
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
#define CONFIG_KEYPAD SAMSUNG_YH820_PAD
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA
/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48
/* We're able to shut off power to the HDD */
/* todo #define HAVE_ATA_POWER_OFF */
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
/* Define this if you have the AK4537 audio codec */
#define HAVE_AK4537
/* AK4537 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
#define AB_REPEAT_ENABLE
#define BATTERY_CAPACITY_DEFAULT 650 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 800 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* define current usage levels */
#define CURRENT_NORMAL 90 /* All values are estimations from my battery */
#define CURRENT_BACKLIGHT 50 /* benches and may need some tuning */
#if defined(HAVE_RECORDING)
#define CURRENT_RECORD 5
#endif
/* Hardware controlled charging */
#define CONFIG_CHARGING CHARGING_SIMPLE
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* Define this if you have a PortalPlayer PP5020 */
#define CONFIG_CPU PP5020
/* Define this if you want to use the PP5020 i2c interface */
#define CONFIG_I2C I2C_PP5020
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* The start address index for ROM builds */
#define ROM_START 0x00000000
/* The size of the flash ROM */
#define FLASH_SIZE 0x100000
/* Define this to the CPU frequency */
#define CPU_FREQ 75000000
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x04e8
#define USB_PRODUCT_ID 0x5023
#define HAVE_USB_HID_MOUSE
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define MI4_FORMAT
#define BOOTFILE_EXT "mi4"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0x00
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 0x00
#define ICODE_ATTR_TREMOR_NOT_MDCT
/* DMA is used only for reading on PP502x because although reads are ~8x faster
* writes appear to be ~25% slower.
*/
#ifndef BOOTLOADER
#define HAVE_ATA_DMA
#endif
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink