91647264f8
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25248 a1c6a512-1295-4272-9138-f99709370657
295 lines
9 KiB
C
295 lines
9 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2002 by Alan Korr
|
|
* Copyright (C) 2008 François Dinel
|
|
* Copyright (C) 2008-2009 Rafaël Carré
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
|
|
#include "kernel.h"
|
|
#include "lcd.h"
|
|
#include "system.h"
|
|
#include "cpu.h"
|
|
#include "string.h"
|
|
|
|
#include "lcd-clip.h"
|
|
|
|
/*** definitions ***/
|
|
|
|
#define LCD_SET_LOWER_COLUMN_ADDRESS ((char)0x00)
|
|
#define LCD_SET_HIGHER_COLUMN_ADDRESS ((char)0x10)
|
|
#define LCD_SET_DISPLAY_START_LINE ((char)0x40)
|
|
#define LCD_SET_CONTRAST_CONTROL_REGISTER ((char)0x81)
|
|
#define LCD_SET_SEGMENT_REMAP ((char)0xA0)
|
|
#define LCD_SET_SEGMENT_REMAP_INV ((char)0xA1)
|
|
#define LCD_SET_ENTIRE_DISPLAY_OFF ((char)0xA4)
|
|
#define LCD_SET_ENTIRE_DISPLAY_ON ((char)0xA5)
|
|
#define LCD_SET_NORMAL_DISPLAY ((char)0xA6)
|
|
#define LCD_SET_REVERSE_DISPLAY ((char)0xA7)
|
|
#define LCD_SET_MULTIPLEX_RATIO ((char)0xA8)
|
|
#define LCD_SET_DC_DC ((char)0xAD)
|
|
#define LCD_SET_DC_DC_PART2 ((char)0x8A)
|
|
#define LCD_SET_DISPLAY_OFF ((char)0xAE)
|
|
#define LCD_SET_DISPLAY_ON ((char)0xAF)
|
|
#define LCD_SET_PAGE_ADDRESS ((char)0xB0)
|
|
#define LCD_SET_COM_OUTPUT_SCAN_DIRECTION ((char)0xC0)
|
|
#define LCD_SET_COM_OUTPUT_SCAN_DIRECTION_INV ((char)0xC8)
|
|
#define LCD_SET_DISPLAY_CLOCK_AND_OSC_FREQ ((char)0xD5)
|
|
#define LCD_SET_VCOM_DESELECT_LEVEL ((char)0xDB)
|
|
#define LCD_SET_PRECHARGE_PERIOD ((char)0xD9)
|
|
#define LCD_NOP ((char)0xE3)
|
|
|
|
/* LCD command codes */
|
|
#define LCD_CNTL_CONTRAST 0x81 /* Contrast */
|
|
#define LCD_CNTL_OUTSCAN 0xc8 /* Output scan direction */
|
|
#define LCD_CNTL_SEGREMAP 0xa1 /* Segment remap */
|
|
#define LCD_CNTL_DISPON 0xaf /* Display on */
|
|
|
|
#define LCD_CNTL_PAGE 0xb0 /* Page address */
|
|
#define LCD_CNTL_HIGHCOL 0x10 /* Upper column address */
|
|
#define LCD_CNTL_LOWCOL 0x00 /* Lower column address */
|
|
|
|
/** globals **/
|
|
|
|
static bool display_on; /* used by lcd_enable */
|
|
|
|
/*** hardware configuration ***/
|
|
|
|
int lcd_default_contrast(void)
|
|
{
|
|
return DEFAULT_CONTRAST_SETTING;
|
|
}
|
|
|
|
void lcd_set_contrast(int val)
|
|
{
|
|
lcd_write_command(LCD_CNTL_CONTRAST);
|
|
lcd_write_command(val);
|
|
}
|
|
|
|
void lcd_set_invert_display(bool yesno)
|
|
{
|
|
if (yesno)
|
|
lcd_write_command(LCD_SET_REVERSE_DISPLAY);
|
|
else
|
|
lcd_write_command(LCD_SET_NORMAL_DISPLAY);
|
|
}
|
|
|
|
/* turn the display upside down (call lcd_update() afterwards) */
|
|
void lcd_set_flip(bool yesno)
|
|
{
|
|
if (yesno)
|
|
{
|
|
lcd_write_command(LCD_SET_SEGMENT_REMAP);
|
|
lcd_write_command(LCD_SET_COM_OUTPUT_SCAN_DIRECTION);
|
|
}
|
|
else
|
|
{
|
|
lcd_write_command(LCD_SET_SEGMENT_REMAP_INV);
|
|
lcd_write_command(LCD_SET_COM_OUTPUT_SCAN_DIRECTION_INV);
|
|
}
|
|
}
|
|
|
|
#ifdef HAVE_LCD_ENABLE
|
|
void lcd_enable(bool enable)
|
|
{
|
|
if(display_on == enable)
|
|
return;
|
|
|
|
if( (display_on = enable) ) /* simple '=' is not a typo ! */
|
|
{
|
|
lcd_enable_power(enable);
|
|
lcd_write_command(LCD_SET_DISPLAY_ON);
|
|
send_event(LCD_EVENT_ACTIVATION, NULL);
|
|
}
|
|
else
|
|
{
|
|
lcd_write_command(LCD_SET_DISPLAY_OFF);
|
|
lcd_enable_power(enable);
|
|
}
|
|
}
|
|
|
|
bool lcd_active(void)
|
|
{
|
|
return display_on;
|
|
}
|
|
|
|
#endif
|
|
|
|
/* LCD init, largely based on what OF does */
|
|
void lcd_init_device(void)
|
|
{
|
|
int i;
|
|
#define LCD_FULLSCREEN (128+4)
|
|
fb_data p_bytes[LCD_FULLSCREEN]; /* framebuffer used to clear the screen */
|
|
|
|
lcd_hw_init();
|
|
|
|
/* Set display clock (divide ratio = 1) and oscillator frequency (1) */
|
|
lcd_write_command(LCD_SET_DISPLAY_CLOCK_AND_OSC_FREQ);
|
|
lcd_write_command(0x10);
|
|
|
|
/* Set VCOM deselect level to 0.76V */
|
|
lcd_write_command(LCD_SET_VCOM_DESELECT_LEVEL);
|
|
lcd_write_command(0x34);
|
|
|
|
/* Set pre-charge period (p1period is 2 dclk and p2period is 5 dclk) */
|
|
lcd_write_command(LCD_SET_PRECHARGE_PERIOD);
|
|
lcd_write_command(0x25);
|
|
|
|
/* Set contrast register to 12% */
|
|
lcd_set_contrast(lcd_default_contrast());
|
|
|
|
/* Disable DC-DC */
|
|
lcd_write_command(LCD_SET_DC_DC);
|
|
lcd_write_command(LCD_SET_DC_DC_PART2/*|0*/);
|
|
|
|
/* Set starting line as 0 */
|
|
lcd_write_command(LCD_SET_DISPLAY_START_LINE /*|(0 & 0x3f)*/);
|
|
|
|
/* Column 131 is remapped to SEG0 */
|
|
lcd_write_command(LCD_SET_SEGMENT_REMAP_INV);
|
|
|
|
/* Invert COM scan direction (N-1 to 0) */
|
|
lcd_write_command(LCD_SET_COM_OUTPUT_SCAN_DIRECTION_INV);
|
|
|
|
/* Set normal display mode (not every pixel ON) */
|
|
lcd_write_command(LCD_SET_ENTIRE_DISPLAY_OFF);
|
|
|
|
/* Set normal display mode (not inverted) */
|
|
lcd_write_command(LCD_SET_NORMAL_DISPLAY);
|
|
|
|
/* Clear whole framebuffer, including "overscan"
|
|
* We don't need to handle that out of screen columns in lcd_clear_display()
|
|
* since we will never write into it anymore
|
|
*/
|
|
lcd_write_command (LCD_SET_HIGHER_COLUMN_ADDRESS /*| 0*/);
|
|
lcd_write_command (LCD_SET_LOWER_COLUMN_ADDRESS /*| 0*/);
|
|
|
|
memset(p_bytes, 0, sizeof(p_bytes)); /* fills with 0 : pixel off */
|
|
|
|
for(i = 0; i < 8; i++)
|
|
{
|
|
lcd_write_command (LCD_SET_PAGE_ADDRESS | (i /*& 0xf*/));
|
|
lcd_write_data(p_bytes, LCD_FULLSCREEN /* overscan */);
|
|
}
|
|
|
|
lcd_enable(true);
|
|
|
|
lcd_update();
|
|
}
|
|
|
|
/*** Update functions ***/
|
|
|
|
/* Performance function that works with an external buffer
|
|
note that by and bheight are in 8-pixel units! */
|
|
void lcd_blit_mono(const unsigned char *data, int x, int by, int width,
|
|
int bheight, int stride)
|
|
{
|
|
if(!display_on)
|
|
return;
|
|
|
|
/* Copy display bitmap to hardware */
|
|
while (bheight--)
|
|
{
|
|
lcd_write_command (LCD_CNTL_PAGE | (by++ & 0xf));
|
|
lcd_write_command (LCD_CNTL_HIGHCOL | (((x+2)>>4) & 0xf));
|
|
lcd_write_command (LCD_CNTL_LOWCOL | ((x+2) & 0xf));
|
|
|
|
lcd_write_data(data, width);
|
|
data += stride;
|
|
}
|
|
}
|
|
|
|
/* Helper function for lcd_grey_phase_blit(). */
|
|
void lcd_grey_data(unsigned char *values, unsigned char *phases, int count);
|
|
|
|
/* Performance function that works with an external buffer
|
|
note that by and bheight are in 8-pixel units! */
|
|
void lcd_blit_grey_phase(unsigned char *values, unsigned char *phases,
|
|
int x, int by, int width, int bheight, int stride)
|
|
{
|
|
if(!display_on)
|
|
return;
|
|
|
|
stride <<= 3; /* 8 pixels per block */
|
|
/* Copy display bitmap to hardware */
|
|
while (bheight--)
|
|
{
|
|
lcd_write_command (LCD_CNTL_PAGE | (by++ & 0xf));
|
|
lcd_write_command (LCD_CNTL_HIGHCOL | (((x+2)>>4) & 0xf));
|
|
lcd_write_command (LCD_CNTL_LOWCOL | ((x+2) & 0xf));
|
|
|
|
lcd_grey_data(values, phases, width);
|
|
|
|
values += stride;
|
|
phases += stride;
|
|
}
|
|
}
|
|
|
|
/* Update the display.
|
|
This must be called after all other LCD functions that change the display. */
|
|
void lcd_update(void) ICODE_ATTR;
|
|
void lcd_update(void)
|
|
{
|
|
int y;
|
|
|
|
if(!display_on)
|
|
return;
|
|
|
|
/* Copy display bitmap to hardware */
|
|
for (y = 0; y < LCD_FBHEIGHT; y++)
|
|
{
|
|
lcd_write_command (LCD_CNTL_PAGE | (y & 0xf));
|
|
lcd_write_command (LCD_CNTL_HIGHCOL | ((2 >> 4) & 0xf));
|
|
lcd_write_command (LCD_CNTL_LOWCOL | (2 & 0xf));
|
|
|
|
lcd_write_data (lcd_framebuffer[y], LCD_WIDTH);
|
|
}
|
|
}
|
|
|
|
/* Update a fraction of the display. */
|
|
void lcd_update_rect(int, int, int, int) ICODE_ATTR;
|
|
void lcd_update_rect(int x, int y, int width, int height)
|
|
{
|
|
int ymax;
|
|
|
|
if(!display_on)
|
|
return;
|
|
|
|
/* The Y coordinates have to work on even 8 pixel rows */
|
|
ymax = (y + height-1) >> 3;
|
|
y >>= 3;
|
|
|
|
if(x + width > LCD_WIDTH)
|
|
width = LCD_WIDTH - x;
|
|
if (width <= 0)
|
|
return; /* nothing left to do, 0 is harmful to lcd_write_data() */
|
|
if(ymax >= LCD_FBHEIGHT)
|
|
ymax = LCD_FBHEIGHT-1;
|
|
|
|
/* Copy specified rectange bitmap to hardware */
|
|
for (; y <= ymax; y++)
|
|
{
|
|
lcd_write_command (LCD_CNTL_PAGE | (y & 0xf));
|
|
lcd_write_command (LCD_CNTL_HIGHCOL | (((x+2) >> 4) & 0xf));
|
|
lcd_write_command (LCD_CNTL_LOWCOL | ((x+2) & 0xf));
|
|
|
|
lcd_write_data (&lcd_framebuffer[y][x], width);
|
|
}
|
|
}
|