Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/ata-sd-pp.c
Thomas Martitz ee7cf6c63c Remove unused card_detect(), and make card_detect_target() static inline in each sd driver. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23757 a1c6a512-1295-4272-9138-f99709370657
2009-11-26 00:51:09 +00:00

1378 lines
39 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 Daniel Ankers
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h" /* for HAVE_MULTIDRIVE */
#include "fat.h"
#include "hotswap.h"
#ifdef HAVE_HOTSWAP
#include "sd-pp-target.h"
#endif
#include "ata_idle_notify.h"
#include "system.h"
#include <string.h>
#include "thread.h"
#include "led.h"
#include "disk.h"
#include "cpu.h"
#include "panic.h"
#include "usb.h"
#include "sd.h"
#include "storage.h"
#define SECTOR_SIZE 512
#define BLOCKS_PER_BANK 0x7a7800
/* Comparing documentations of various MMC/SD controllers revealed, */
/* that this controller seems to be a mix of PXA27x, PXA255 and */
/* some PP specific stuff. The register and bit definitions are */
/* taken from the 'PXA27x Developers Manual', as it appears to be */
/* the closest match. Known differences and obscurities are commented.*/
#define MMC_STRPCL (*(volatile unsigned int *)(0x70008200))
#define MMC_STAT (*(volatile unsigned int *)(0x70008204))
#define MMC_CLKRT (*(volatile unsigned int *)(0x70008208))
#define MMC_SPI (*(volatile unsigned int *)(0x7000820c))
#define MMC_CMDAT (*(volatile unsigned int *)(0x70008210))
#define MMC_RESTO (*(volatile unsigned int *)(0x70008214))
#define MMC_RDTO (*(volatile unsigned int *)(0x70008218))
#define MMC_BLKLEN (*(volatile unsigned int *)(0x7000821c))
#define MMC_NUMBLK (*(volatile unsigned int *)(0x70008220))
#define MMC_I_MASK (*(volatile unsigned int *)(0x70008224))
#define MMC_CMD (*(volatile unsigned int *)(0x70008228))
#define MMC_ARGH (*(volatile unsigned int *)(0x7000822c))
#define MMC_ARGL (*(volatile unsigned int *)(0x70008230))
#define MMC_RES (*(volatile unsigned int *)(0x70008234))
/* PXA255/27x have separate RX/TX FIFOs with 32x8 bit */
/* PP502x has a combined Data FIFO with 16x16 bit */
#define MMC_DATA_FIFO (*(volatile unsigned int *)(0x70008280))
/* PP specific registers, no other controller seem to have such. */
#define MMC_SD_STATE (*(volatile unsigned int *)(0x70008238))
#define MMC_INIT_1 (*(volatile unsigned int *)(0x70008240))
#define MMC_INIT_2 (*(volatile unsigned int *)(0x70008244))
/* MMC_STAT bits */
#define STAT_SDIO_SUSPEND_ACK (1 << 16)
#define STAT_SDIO_INT (1 << 15)
#define STAT_RD_STALLED (1 << 14)
#define STAT_END_CMD_RES (1 << 13)
#define STAT_PRG_DONE (1 << 12)
#define STAT_DATA_TRAN_DONE (1 << 11)
#define STAT_SPI_WR_ERR (1 << 10)
#define STAT_FLASH_ERR (1 << 9)
#define STAT_CLK_EN (1 << 8)
#define STAT_RECV_FIFO_FULL (1 << 7) /* taken from PXA255 */
#define STAT_XMIT_FIFO_EMPTY (1 << 6) /* taken from PXA255 */
#define STAT_RES_CRC_ERR (1 << 5)
#define STAT_DAT_ERR_TOKEN (1 << 4)
#define STAT_CRC_RD_ERR (1 << 3)
#define STAT_CRC_WR_ERR (1 << 2)
#define STAT_TIME_OUT_RES (1 << 1)
#define STAT_TIME_OUT_READ (1)
#define STAT_ERROR_BITS (0x3f)
/* MMC_CMDAT bits */
/* Some of the bits used by the OF don't make much sense with these */
/* definitions. So they're probably different between PXA and PP502x */
/* Bits 0-5 appear to match though. */
#define CMDAT_SDIO_RESUME (1 << 13)
#define CMDAT_SDIO_SUSPEND (1 << 12)
#define CMDAT_SDIO_INT_EN (1 << 11)
#define CMDAT_STOP_TRAN (1 << 10)
#define CMDAT_SD_4DAT (1 << 8)
#define CMDAT_DMA_EN (1 << 7)
#define CMDAT_INIT (1 << 6)
#define CMDAT_BUSY (1 << 5)
#define CMDAT_STRM_BLK (1 << 4)
#define CMDAT_WR_RD (1 << 3)
#define CMDAT_DATA_EN (1 << 2)
#define CMDAT_RES_TYPE3 (3)
#define CMDAT_RES_TYPE2 (2)
#define CMDAT_RES_TYPE1 (1)
/* MMC_I_MASK bits */
/* PP502x apparently only has bits 0-3 */
#define I_MASK_SDIO_SUSPEND_ACK (1 << 12)
#define I_MASK_SDIO_INT (1 << 11)
#define I_MASK_RD_STALLED (1 << 10)
#define I_MASK_RES_ERR (1 << 9)
#define I_MASK_DAT_ERR (1 << 8)
#define I_MASK_TINT (1 << 7)
#define I_MASK_TXFIFO_WR_REQ (1 << 6)
#define I_MASK_RXFIFO_RD_REQ (1 << 5)
#define I_MASK_CLK_IS_OFF (1 << 4)
#define I_MASK_STOP_CMD (1 << 3)
#define I_MASK_END_CMD_RES (1 << 2)
#define I_MASK_PRG_DONE (1 << 1)
#define I_MASK_DATA_TRAN_DONE (1 << 0)
#define FIFO_LEN 16 /* FIFO is 16 words deep */
#define EC_OK 0
#define EC_FAILED 1
#define EC_NOCARD 2
#define EC_WAIT_STATE_FAILED 3
#define EC_CHECK_TIMEOUT_FAILED 4
#define EC_POWER_UP 5
#define EC_READ_TIMEOUT 6
#define EC_WRITE_TIMEOUT 7
#define EC_TRAN_SEL_BANK 8
#define EC_TRAN_READ_ENTRY 9
#define EC_TRAN_READ_EXIT 10
#define EC_TRAN_WRITE_ENTRY 11
#define EC_TRAN_WRITE_EXIT 12
#define EC_FIFO_SEL_BANK_EMPTY 13
#define EC_FIFO_SEL_BANK_DONE 14
#define EC_FIFO_ENA_BANK_EMPTY 15
#define EC_FIFO_READ_FULL 16
#define EC_FIFO_WR_EMPTY 17
#define EC_FIFO_WR_DONE 18
#define EC_COMMAND 19
#define NUM_EC 20
/* for compatibility */
static long last_disk_activity = -1;
/** static, private data **/
static bool initialized = false;
static long next_yield = 0;
#define MIN_YIELD_PERIOD 1000
static tCardInfo card_info[2];
static tCardInfo *currcard = NULL; /* current active card */
struct sd_card_status
{
int retry;
int retry_max;
};
static struct sd_card_status sd_status[NUM_DRIVES] =
{
{ 0, 1 },
#ifdef HAVE_MULTIDRIVE
{ 0, 10 }
#endif
};
/* Shoot for around 75% usage */
static long sd_stack [(DEFAULT_STACK_SIZE*2 + 0x1c0)/sizeof(long)];
static const char sd_thread_name[] = "ata/sd";
static struct mutex sd_mtx SHAREDBSS_ATTR;
static struct event_queue sd_queue;
#ifdef HAVE_HOTSWAP
static int sd_first_drive = 0;
#endif
/* Posted when card plugged status has changed */
#define SD_HOTSWAP 1
/* Actions taken by sd_thread when card status has changed */
enum sd_thread_actions
{
SDA_NONE = 0x0,
SDA_UNMOUNTED = 0x1,
SDA_MOUNTED = 0x2
};
/* Private Functions */
static unsigned int check_time[NUM_EC];
static inline bool sd_check_timeout(long timeout, int id)
{
return !TIME_AFTER(USEC_TIMER, check_time[id] + timeout);
}
static bool sd_poll_status(unsigned int trigger, long timeout)
{
long t = USEC_TIMER;
while ((MMC_STAT & trigger) == 0)
{
long time = USEC_TIMER;
if (TIME_AFTER(time, next_yield))
{
long ty = USEC_TIMER;
yield();
timeout += USEC_TIMER - ty;
next_yield = ty + MIN_YIELD_PERIOD;
}
if (TIME_AFTER(time, t + timeout))
return false;
}
return true;
}
static int sd_command(unsigned int cmd, unsigned long arg1,
unsigned long *response, unsigned int cmdat)
{
int i, words; /* Number of 16 bit words to read from MMC_RES */
unsigned int data[9];
MMC_CMD = cmd;
MMC_ARGH = (unsigned int)((arg1 & 0xffff0000) >> 16);
MMC_ARGL = (unsigned int)((arg1 & 0xffff));
MMC_CMDAT = cmdat;
if (!sd_poll_status(STAT_END_CMD_RES, 100000))
return -EC_COMMAND;
if ((MMC_STAT & STAT_ERROR_BITS) != 0)
/* Error sending command */
return -EC_COMMAND - (MMC_STAT & STAT_ERROR_BITS)*100;
if (cmd == SD_GO_IDLE_STATE)
return 0; /* no response here */
words = (cmdat == CMDAT_RES_TYPE2) ? 9 : 3;
for (i = 0; i < words; i++) /* MMC_RES is read MSB first */
data[i] = MMC_RES; /* Read most significant 16-bit word */
if (response == NULL)
{
/* response discarded */
}
else if (cmdat == CMDAT_RES_TYPE2)
{
/* Response type 2 has the following structure:
* [135:135] Start Bit - '0'
* [134:134] Transmission bit - '0'
* [133:128] Reserved - '111111'
* [127:001] CID or CSD register including internal CRC7
* [000:000] End Bit - '1'
*/
response[3] = (data[0]<<24) + (data[1]<<8) + (data[2]>>8);
response[2] = (data[2]<<24) + (data[3]<<8) + (data[4]>>8);
response[1] = (data[4]<<24) + (data[5]<<8) + (data[6]>>8);
response[0] = (data[6]<<24) + (data[7]<<8) + (data[8]>>8);
}
else
{
/* Response types 1, 1b, 3, 6, 7 have the following structure:
* Types 4 and 5 are not supported.
*
* [47] Start bit - '0'
* [46] Transmission bit - '0'
* [45:40] R1, R1b, R6, R7: Command index
* R3: Reserved - '111111'
* [39:8] R1, R1b: Card Status
* R3: OCR Register
* R6: [31:16] RCA
* [15: 0] Card Status Bits 23, 22, 19, 12:0
* [23] COM_CRC_ERROR
* [22] ILLEGAL_COMMAND
* [19] ERROR
* [12:9] CURRENT_STATE
* [8] READY_FOR_DATA
* [7:6]
* [5] SD_APP_CMD
* [4]
* [3] AKE_SEQ_ERROR
* [2] Reserved
* [1:0] Reserved for test mode
* R7: [19:16] Voltage accepted
* [15:8] echo-back of check pattern
* [7:1] R1, R1b: CRC7
* R3: Reserved - '1111111'
* [0] End Bit - '1'
*/
response[0] = (data[0]<<24) + (data[1]<<8) + (data[2]>>8);
}
return 0;
}
static int sd_wait_for_state(unsigned int state, int id)
{
unsigned long response = 0;
unsigned int timeout = 0x80000;
check_time[id] = USEC_TIMER;
while (1)
{
int ret = sd_command(SD_SEND_STATUS, currcard->rca, &response, CMDAT_RES_TYPE1);
long us;
if (ret < 0)
return ret*100 - id;
if (((response >> 9) & 0xf) == state)
{
MMC_SD_STATE = state;
return 0;
}
if (!sd_check_timeout(timeout, id))
return -EC_WAIT_STATE_FAILED*100 - id;
us = USEC_TIMER;
if (TIME_AFTER(us, next_yield))
{
yield();
timeout += USEC_TIMER - us;
next_yield = us + MIN_YIELD_PERIOD;
}
}
}
static inline bool card_detect_target(void)
{
#ifdef HAVE_HOTSWAP
#ifdef SANSA_E200
return (GPIOA_INPUT_VAL & 0x80) == 0; /* low active */
#elif defined SANSA_C200
return (GPIOL_INPUT_VAL & 0x08) != 0; /* high active */
#endif
#else
return false;
#endif
}
static inline void copy_read_sectors_fast(unsigned char **buf)
{
/* Copy one chunk of 16 words using best method for start alignment */
switch ( (intptr_t)*buf & 3 )
{
case 0:
asm volatile (
"ldmia %[data], { r2-r9 } \r\n"
"orr r2, r2, r3, lsl #16 \r\n"
"orr r4, r4, r5, lsl #16 \r\n"
"orr r6, r6, r7, lsl #16 \r\n"
"orr r8, r8, r9, lsl #16 \r\n"
"stmia %[buf]!, { r2, r4, r6, r8 } \r\n"
"ldmia %[data], { r2-r9 } \r\n"
"orr r2, r2, r3, lsl #16 \r\n"
"orr r4, r4, r5, lsl #16 \r\n"
"orr r6, r6, r7, lsl #16 \r\n"
"orr r8, r8, r9, lsl #16 \r\n"
"stmia %[buf]!, { r2, r4, r6, r8 } \r\n"
: [buf]"+&r"(*buf)
: [data]"r"(&MMC_DATA_FIFO)
: "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9"
);
break;
case 1:
asm volatile (
"ldmia %[data], { r2-r9 } \r\n"
"orr r3, r2, r3, lsl #16 \r\n"
"strb r3, [%[buf]], #1 \r\n"
"mov r3, r3, lsr #8 \r\n"
"strh r3, [%[buf]], #2 \r\n"
"mov r3, r3, lsr #16 \r\n"
"orr r3, r3, r4, lsl #8 \r\n"
"orr r3, r3, r5, lsl #24 \r\n"
"mov r5, r5, lsr #8 \r\n"
"orr r5, r5, r6, lsl #8 \r\n"
"orr r5, r5, r7, lsl #24 \r\n"
"mov r7, r7, lsr #8 \r\n"
"orr r7, r7, r8, lsl #8 \r\n"
"orr r7, r7, r9, lsl #24 \r\n"
"mov r2, r9, lsr #8 \r\n"
"stmia %[buf]!, { r3, r5, r7 } \r\n"
"ldmia %[data], { r3-r10 } \r\n"
"orr r2, r2, r3, lsl #8 \r\n"
"orr r2, r2, r4, lsl #24 \r\n"
"mov r4, r4, lsr #8 \r\n"
"orr r4, r4, r5, lsl #8 \r\n"
"orr r4, r4, r6, lsl #24 \r\n"
"mov r6, r6, lsr #8 \r\n"
"orr r6, r6, r7, lsl #8 \r\n"
"orr r6, r6, r8, lsl #24 \r\n"
"mov r8, r8, lsr #8 \r\n"
"orr r8, r8, r9, lsl #8 \r\n"
"orr r8, r8, r10, lsl #24 \r\n"
"mov r10, r10, lsr #8 \r\n"
"stmia %[buf]!, { r2, r4, r6, r8 } \r\n"
"strb r10, [%[buf]], #1 \r\n"
: [buf]"+&r"(*buf)
: [data]"r"(&MMC_DATA_FIFO)
: "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10"
);
break;
case 2:
asm volatile (
"ldmia %[data], { r2-r9 } \r\n"
"strh r2, [%[buf]], #2 \r\n"
"orr r3, r3, r4, lsl #16 \r\n"
"orr r5, r5, r6, lsl #16 \r\n"
"orr r7, r7, r8, lsl #16 \r\n"
"stmia %[buf]!, { r3, r5, r7 } \r\n"
"ldmia %[data], { r2-r8, r10 } \r\n"
"orr r2, r9, r2, lsl #16 \r\n"
"orr r3, r3, r4, lsl #16 \r\n"
"orr r5, r5, r6, lsl #16 \r\n"
"orr r7, r7, r8, lsl #16 \r\n"
"stmia %[buf]!, { r2, r3, r5, r7 } \r\n"
"strh r10, [%[buf]], #2 \r\n"
: [buf]"+&r"(*buf)
: [data]"r"(&MMC_DATA_FIFO)
: "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10"
);
break;
case 3:
asm volatile (
"ldmia %[data], { r2-r9 } \r\n"
"orr r3, r2, r3, lsl #16 \r\n"
"strb r3, [%[buf]], #1 \r\n"
"mov r3, r3, lsr #8 \r\n"
"orr r3, r3, r4, lsl #24 \r\n"
"mov r4, r4, lsr #8 \r\n"
"orr r5, r4, r5, lsl #8 \r\n"
"orr r5, r5, r6, lsl #24 \r\n"
"mov r6, r6, lsr #8 \r\n"
"orr r7, r6, r7, lsl #8 \r\n"
"orr r7, r7, r8, lsl #24 \r\n"
"mov r8, r8, lsr #8 \r\n"
"orr r2, r8, r9, lsl #8 \r\n"
"stmia %[buf]!, { r3, r5, r7 } \r\n"
"ldmia %[data], { r3-r10 } \r\n"
"orr r2, r2, r3, lsl #24 \r\n"
"mov r3, r3, lsr #8 \r\n"
"orr r4, r3, r4, lsl #8 \r\n"
"orr r4, r4, r5, lsl #24 \r\n"
"mov r5, r5, lsr #8 \r\n"
"orr r6, r5, r6, lsl #8 \r\n"
"orr r6, r6, r7, lsl #24 \r\n"
"mov r7, r7, lsr #8 \r\n"
"orr r8, r7, r8, lsl #8 \r\n"
"orr r8, r8, r9, lsl #24 \r\n"
"mov r9, r9, lsr #8 \r\n"
"orr r10, r9, r10, lsl #8 \r\n"
"stmia %[buf]!, { r2, r4, r6, r8 } \r\n"
"strh r10, [%[buf]], #2 \r\n"
"mov r10, r10, lsr #16 \r\n"
"strb r10, [%[buf]], #1 \r\n"
: [buf]"+&r"(*buf)
: [data]"r"(&MMC_DATA_FIFO)
: "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10"
);
break;
}
}
static inline void copy_read_sectors_slow(unsigned char** buf)
{
int cnt = FIFO_LEN;
int t;
/* Copy one chunk of 16 words */
asm volatile (
"1: \r\n"
"ldrh %[t], [%[data]] \r\n"
"strb %[t], [%[buf]], #1 \r\n"
"mov %[t], %[t], lsr #8 \r\n"
"strb %[t], [%[buf]], #1 \r\n"
"subs %[cnt], %[cnt], #1 \r\n"
"bgt 1b \r\n"
: [cnt]"+&r"(cnt), [buf]"+&r"(*buf),
[t]"=&r"(t)
: [data]"r"(&MMC_DATA_FIFO)
);
}
/* Writes have to be kept slow for now */
static inline void copy_write_sectors(const unsigned char** buf)
{
int cnt = FIFO_LEN - 1;
unsigned t;
long time;
time = USEC_TIMER + 3;
if (((intptr_t)*buf & 3) == 0)
{
asm volatile (
"ldmia %[buf]!, { r3, r5, r7, r9 } \r\n"
"mov r4, r3, lsr #16 \r\n"
"mov r6, r5, lsr #16 \r\n"
"mov r8, r7, lsr #16 \r\n"
"mov r10, r9, lsr #16 \r\n"
"stmia %[data], { r3-r10 } \r\n"
"ldmia %[buf]!, { r3, r5, r7, r9 } \r\n"
"mov r4, r3, lsr #16 \r\n"
"mov r6, r5, lsr #16 \r\n"
"mov r8, r7, lsr #16 \r\n"
"mov %[t], r9, lsr #16 \r\n"
"stmia %[data], { r3-r9 } \r\n"
: [buf]"+&r"(*buf), [t]"=&r"(t)
: [data]"r"(&MMC_DATA_FIFO)
: "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10"
);
}
else
{
do
{
t = *(*buf)++;
t |= *(*buf)++ << 8;
MMC_DATA_FIFO = t;
} while (--cnt > 0); /* tail loop is faster */
t = *(*buf)++;
t |= *(*buf)++ << 8;
}
/* Don't write the last word before at least 3 usec have elapsed since FIFO_EMPTY */
/* This prevents the 'two bytes inserted' bug. */
while (!TIME_AFTER(USEC_TIMER, time));
MMC_DATA_FIFO = t;
}
static int sd_select_bank(unsigned char bank)
{
unsigned char card_data[512];
const unsigned char* write_buf;
int i, ret;
memset(card_data, 0, 512);
ret = sd_wait_for_state(SD_TRAN, EC_TRAN_SEL_BANK);
if (ret < 0)
return ret;
MMC_BLKLEN = 512;
MMC_NUMBLK = 1;
ret = sd_command(35, 0, NULL, /* CMD35 is vendor specific */
0x1c00 | CMDAT_WR_RD | CMDAT_DATA_EN | CMDAT_RES_TYPE1);
if (ret < 0)
return ret;
MMC_SD_STATE = SD_PRG;
card_data[0] = bank;
/* Write the card data */
write_buf = card_data;
for (i = 0; i < SD_BLOCK_SIZE/2; i += FIFO_LEN)
{
/* Wait for the FIFO to empty */
if (sd_poll_status(STAT_XMIT_FIFO_EMPTY, 10000))
{
copy_write_sectors(&write_buf); /* Copy one chunk of 16 words */
continue;
}
return -EC_FIFO_SEL_BANK_EMPTY;
}
if (!sd_poll_status(STAT_PRG_DONE, 10000))
return -EC_FIFO_SEL_BANK_DONE;
currcard->current_bank = bank;
return 0;
}
static void sd_card_mux(int card_no)
{
/* Set the current card mux */
#if defined(SANSA_E200)
if (card_no == 0)
{
GPO32_VAL |= 0x4;
GPIO_CLEAR_BITWISE(GPIOA_ENABLE, 0x7a);
GPIO_CLEAR_BITWISE(GPIOA_OUTPUT_EN, 0x7a);
GPIO_SET_BITWISE(GPIOD_ENABLE, 0x1f);
GPIO_SET_BITWISE(GPIOD_OUTPUT_VAL, 0x1f);
GPIO_SET_BITWISE(GPIOD_OUTPUT_EN, 0x1f);
outl((inl(0x70000014) & ~(0x3ffff)) | 0x255aa, 0x70000014);
}
else
{
GPO32_VAL &= ~0x4;
GPIO_CLEAR_BITWISE(GPIOD_ENABLE, 0x1f);
GPIO_CLEAR_BITWISE(GPIOD_OUTPUT_EN, 0x1f);
GPIO_SET_BITWISE(GPIOA_ENABLE, 0x7a);
GPIO_SET_BITWISE(GPIOA_OUTPUT_VAL, 0x7a);
GPIO_SET_BITWISE( GPIOA_OUTPUT_EN, 0x7a);
outl(inl(0x70000014) & ~(0x3ffff), 0x70000014);
}
#elif defined(SANSA_C200)
if (card_no == 0)
{
GPO32_VAL |= 0x4;
GPIO_CLEAR_BITWISE(GPIOD_ENABLE, 0x1f);
GPIO_CLEAR_BITWISE(GPIOD_OUTPUT_EN, 0x1f);
GPIO_SET_BITWISE(GPIOA_ENABLE, 0x7a);
GPIO_SET_BITWISE(GPIOA_OUTPUT_VAL, 0x7a);
GPIO_SET_BITWISE( GPIOA_OUTPUT_EN, 0x7a);
outl(inl(0x70000014) & ~(0x3ffff), 0x70000014);
}
else
{
GPO32_VAL &= ~0x4;
GPIO_CLEAR_BITWISE(GPIOA_ENABLE, 0x7a);
GPIO_CLEAR_BITWISE(GPIOA_OUTPUT_EN, 0x7a);
GPIO_SET_BITWISE(GPIOD_ENABLE, 0x1f);
GPIO_SET_BITWISE(GPIOD_OUTPUT_VAL, 0x1f);
GPIO_SET_BITWISE(GPIOD_OUTPUT_EN, 0x1f);
outl((inl(0x70000014) & ~(0x3ffff)) | 0x255aa, 0x70000014);
}
#elif defined(PHILIPS_SA9200)
/* only 1 "card" (no external memory card) */
(void)card_no;
GPIO_SET_BITWISE(GPIOH_ENABLE, 0x80);
GPIO_SET_BITWISE(GPIOH_OUTPUT_EN, 0x80);
outl(0x255aa, 0x70000014);
GPIO_CLEAR_BITWISE(GPIOA_ENABLE, 0x04);
GPIO_CLEAR_BITWISE(GPIOA_OUTPUT_EN, 0x04);
GPIO_CLEAR_BITWISE(GPIOA_ENABLE, 0x7a);
GPIO_CLEAR_BITWISE(GPIOA_OUTPUT_EN, 0x7a);
GPIO_SET_BITWISE(GPIOH_OUTPUT_VAL, 0x80);
GPIO_SET_BITWISE(GPIOH_OUTPUT_EN, 0x80);
#endif
}
static void sd_init_device(int card_no)
{
/* SD Protocol registers */
#ifdef HAVE_HOTSWAP
unsigned long response = 0;
#endif
unsigned int i;
unsigned char carddata[512];
unsigned char *dataptr;
unsigned long temp_reg[4];
int ret;
/* Enable and initialise controller */
MMC_CLKRT = 6; /* switch to lowest clock rate */
/* Initialise card data as blank */
memset(currcard, 0, sizeof(*currcard));
/* Switch card mux to card to initialize */
sd_card_mux(card_no);
/* Init NAND */
MMC_INIT_1 |= (1 << 15);
MMC_INIT_2 |= (1 << 15);
MMC_INIT_2 &= ~(3 << 12);
MMC_INIT_2 |= (1 << 13);
MMC_INIT_1 &= ~(3 << 12);
MMC_INIT_1 |= (1 << 13);
DEV_EN |= DEV_ATA; /* Enable controller */
DEV_RS |= DEV_ATA; /* Reset controller */
DEV_RS &=~DEV_ATA; /* Clear Reset */
MMC_SD_STATE = SD_TRAN;
MMC_I_MASK = 0xf; /* disable interrupts */
ret = sd_command(SD_GO_IDLE_STATE, 0, NULL, 0x100);
if (ret < 0)
goto card_init_error;
check_time[EC_POWER_UP] = USEC_TIMER;
#ifdef HAVE_HOTSWAP
/* Check for SDHC:
- non-SDHC cards simply ignore SD_SEND_IF_COND (CMD8) and we get error -219,
which we can just ignore and assume we're dealing with standard SD.
- SDHC cards echo back the argument into the response. This is how we
tell if the card is SDHC.
*/
ret = sd_command(SD_SEND_IF_COND,0x1aa, &response,
CMDAT_DATA_EN | CMDAT_RES_TYPE3);
if ( (ret < 0) && (ret!=-219) )
goto card_init_error;
#endif
while ((currcard->ocr & (1 << 31)) == 0) /* until card is powered up */
{
ret = sd_command(SD_APP_CMD, currcard->rca, NULL, CMDAT_RES_TYPE1);
if (ret < 0)
goto card_init_error;
#ifdef HAVE_HOTSWAP
if(response == 0x1aa)
{
/* SDHC */
ret = sd_command(SD_APP_OP_COND, (1<<30)|0x100000,
&currcard->ocr, CMDAT_RES_TYPE3);
}
else
#endif /* HAVE_HOTSWAP */
{
/* SD Standard */
ret = sd_command(SD_APP_OP_COND, 0x100000, &currcard->ocr,
CMDAT_RES_TYPE3);
}
if (ret < 0)
goto card_init_error;
if (!sd_check_timeout(5000000, EC_POWER_UP))
{
ret = -EC_POWER_UP;
goto card_init_error;
}
}
ret = sd_command(SD_ALL_SEND_CID, 0, temp_reg, CMDAT_RES_TYPE2);
if (ret < 0)
goto card_init_error;
for(i=0; i<4; i++)
currcard->cid[i] = temp_reg[3-i];
ret = sd_command(SD_SEND_RELATIVE_ADDR, 0, &currcard->rca, CMDAT_RES_TYPE1);
if (ret < 0)
goto card_init_error;
ret = sd_command(SD_SEND_CSD, currcard->rca, temp_reg, CMDAT_RES_TYPE2);
if (ret < 0)
goto card_init_error;
for(i=0; i<4; i++)
currcard->csd[i] = temp_reg[3-i];
sd_parse_csd(currcard);
MMC_CLKRT = 0; /* switch to highest clock rate */
ret = sd_command(SD_SELECT_CARD, currcard->rca, NULL,
0x80 | CMDAT_RES_TYPE1);
if (ret < 0)
goto card_init_error;
ret = sd_command(SD_APP_CMD, currcard->rca, NULL, CMDAT_RES_TYPE1);
if (ret < 0)
goto card_init_error;
ret = sd_command(SD_SET_BUS_WIDTH, currcard->rca | 2, NULL,
CMDAT_RES_TYPE1); /* 4 bit */
if (ret < 0)
goto card_init_error;
ret = sd_command(SD_SET_BLOCKLEN, currcard->blocksize, NULL,
CMDAT_RES_TYPE1);
if (ret < 0)
goto card_init_error;
MMC_BLKLEN = currcard->blocksize;
/* If this card is >4GB & not SDHC, then we need to enable bank switching */
if( (currcard->numblocks >= BLOCKS_PER_BANK) &&
((currcard->ocr & (1<<30)) == 0) )
{
MMC_SD_STATE = SD_TRAN;
MMC_NUMBLK = 1;
ret = sd_command(SD_SWITCH_FUNC, 0x80ffffef, NULL,
0x1c00 | CMDAT_DATA_EN | CMDAT_RES_TYPE1);
if (ret < 0)
goto card_init_error;
/* Read 512 bytes from the card.
The first 512 bits contain the status information
TODO: Do something useful with this! */
dataptr = carddata;
for (i = 0; i < SD_BLOCK_SIZE/2; i += FIFO_LEN)
{
/* Wait for the FIFO to be full */
if (sd_poll_status(STAT_RECV_FIFO_FULL, 100000))
{
copy_read_sectors_slow(&dataptr);
continue;
}
ret = -EC_FIFO_ENA_BANK_EMPTY;
goto card_init_error;
}
}
currcard->initialized = 1;
return;
/* Card failed to initialize so disable it */
card_init_error:
currcard->initialized = ret;
}
/* lock must already be aquired */
static void sd_select_device(int card_no)
{
currcard = &card_info[card_no];
if (card_no == 0)
{
/* Main card always gets a chance */
sd_status[0].retry = 0;
}
if (currcard->initialized > 0)
{
/* This card is already initialized - switch to it */
sd_card_mux(card_no);
return;
}
if (currcard->initialized == 0)
{
/* Card needs (re)init */
sd_init_device(card_no);
}
}
/* API Functions */
int sd_read_sectors(IF_MD2(int drive,) unsigned long start, int incount,
void* inbuf)
{
#ifndef HAVE_MULTIDRIVE
const int drive = 0;
#endif
int ret;
unsigned char *buf, *buf_end;
unsigned int bank;
/* TODO: Add DMA support. */
mutex_lock(&sd_mtx);
sd_enable(true);
led(true);
sd_read_retry:
if (drive != 0 && !card_detect_target())
{
/* no external sd-card inserted */
ret = -EC_NOCARD;
goto sd_read_error;
}
sd_select_device(drive);
if (currcard->initialized < 0)
{
ret = currcard->initialized;
goto sd_read_error;
}
last_disk_activity = current_tick;
/* Only switch banks with non-SDHC cards */
if((currcard->ocr & (1<<30))==0)
{
bank = start / BLOCKS_PER_BANK;
if (currcard->current_bank != bank)
{
ret = sd_select_bank(bank);
if (ret < 0)
goto sd_read_error;
}
start -= bank * BLOCKS_PER_BANK;
}
ret = sd_wait_for_state(SD_TRAN, EC_TRAN_READ_ENTRY);
if (ret < 0)
goto sd_read_error;
MMC_NUMBLK = incount;
#ifdef HAVE_HOTSWAP
if(currcard->ocr & (1<<30) )
{
/* SDHC */
ret = sd_command(SD_READ_MULTIPLE_BLOCK, start, NULL,
0x1c00 | CMDAT_BUSY | CMDAT_DATA_EN | CMDAT_RES_TYPE1);
}
else
#endif
{
ret = sd_command(SD_READ_MULTIPLE_BLOCK, start * SD_BLOCK_SIZE, NULL,
0x1c00 | CMDAT_BUSY | CMDAT_DATA_EN | CMDAT_RES_TYPE1);
}
if (ret < 0)
goto sd_read_error;
/* TODO: Don't assume SD_BLOCK_SIZE == SECTOR_SIZE */
buf_end = (unsigned char *)inbuf + incount * currcard->blocksize;
for (buf = inbuf; buf < buf_end;)
{
/* Wait for the FIFO to be full */
if (sd_poll_status(STAT_RECV_FIFO_FULL, 0x80000))
{
copy_read_sectors_fast(&buf); /* Copy one chunk of 16 words */
/* TODO: Switch bank if necessary */
continue;
}
ret = -EC_FIFO_READ_FULL;
goto sd_read_error;
}
last_disk_activity = current_tick;
ret = sd_command(SD_STOP_TRANSMISSION, 0, NULL, CMDAT_RES_TYPE1);
if (ret < 0)
goto sd_read_error;
ret = sd_wait_for_state(SD_TRAN, EC_TRAN_READ_EXIT);
if (ret < 0)
goto sd_read_error;
while (1)
{
led(false);
sd_enable(false);
mutex_unlock(&sd_mtx);
return ret;
sd_read_error:
if (sd_status[drive].retry < sd_status[drive].retry_max
&& ret != -EC_NOCARD)
{
sd_status[drive].retry++;
currcard->initialized = 0;
goto sd_read_retry;
}
}
}
int sd_write_sectors(IF_MD2(int drive,) unsigned long start, int count,
const void* outbuf)
{
/* Write support is not finished yet */
/* TODO: The standard suggests using ACMD23 prior to writing multiple blocks
to improve performance */
#ifndef HAVE_MULTIDRIVE
const int drive = 0;
#endif
int ret;
const unsigned char *buf, *buf_end;
unsigned int bank;
mutex_lock(&sd_mtx);
sd_enable(true);
led(true);
sd_write_retry:
if (drive != 0 && !card_detect_target())
{
/* no external sd-card inserted */
ret = -EC_NOCARD;
goto sd_write_error;
}
sd_select_device(drive);
if (currcard->initialized < 0)
{
ret = currcard->initialized;
goto sd_write_error;
}
/* Only switch banks with non-SDHC cards */
if((currcard->ocr & (1<<30))==0)
{
bank = start / BLOCKS_PER_BANK;
if (currcard->current_bank != bank)
{
ret = sd_select_bank(bank);
if (ret < 0)
goto sd_write_error;
}
start -= bank * BLOCKS_PER_BANK;
}
check_time[EC_WRITE_TIMEOUT] = USEC_TIMER;
ret = sd_wait_for_state(SD_TRAN, EC_TRAN_WRITE_ENTRY);
if (ret < 0)
goto sd_write_error;
MMC_NUMBLK = count;
#ifdef HAVE_HOTSWAP
if(currcard->ocr & (1<<30) )
{
/* SDHC */
ret = sd_command(SD_WRITE_MULTIPLE_BLOCK, start, NULL,
CMDAT_WR_RD | CMDAT_DATA_EN | CMDAT_RES_TYPE1);
}
else
#endif
{
ret = sd_command(SD_WRITE_MULTIPLE_BLOCK, start*SD_BLOCK_SIZE, NULL,
CMDAT_WR_RD | CMDAT_DATA_EN | CMDAT_RES_TYPE1);
}
if (ret < 0)
goto sd_write_error;
buf_end = outbuf + count * currcard->blocksize - 2*FIFO_LEN;
for (buf = outbuf; buf <= buf_end;)
{
if (buf == buf_end)
{
/* Set MMC_SD_STATE to SD_PRG for the last buffer fill */
MMC_SD_STATE = SD_PRG;
}
copy_write_sectors(&buf); /* Copy one chunk of 16 words */
/* TODO: Switch bank if necessary */
/* Wait for the FIFO to empty */
if (!sd_poll_status(STAT_XMIT_FIFO_EMPTY, 0x80000))
{
ret = -EC_FIFO_WR_EMPTY;
goto sd_write_error;
}
}
last_disk_activity = current_tick;
if (!sd_poll_status(STAT_PRG_DONE, 0x80000))
{
ret = -EC_FIFO_WR_DONE;
goto sd_write_error;
}
ret = sd_command(SD_STOP_TRANSMISSION, 0, NULL, CMDAT_RES_TYPE1);
if (ret < 0)
goto sd_write_error;
ret = sd_wait_for_state(SD_TRAN, EC_TRAN_WRITE_EXIT);
if (ret < 0)
goto sd_write_error;
while (1)
{
led(false);
sd_enable(false);
mutex_unlock(&sd_mtx);
return ret;
sd_write_error:
if (sd_status[drive].retry < sd_status[drive].retry_max
&& ret != -EC_NOCARD)
{
sd_status[drive].retry++;
currcard->initialized = 0;
goto sd_write_retry;
}
}
}
static void sd_thread(void) __attribute__((noreturn));
static void sd_thread(void)
{
struct queue_event ev;
bool idle_notified = false;
while (1)
{
queue_wait_w_tmo(&sd_queue, &ev, HZ);
switch ( ev.id )
{
#ifdef HAVE_HOTSWAP
case SYS_HOTSWAP_INSERTED:
case SYS_HOTSWAP_EXTRACTED:
fat_lock(); /* lock-out FAT activity first -
prevent deadlocking via disk_mount that
would cause a reverse-order attempt with
another thread */
mutex_lock(&sd_mtx); /* lock-out card activity - direct calls
into driver that bypass the fat cache */
/* We now have exclusive control of fat cache and ata */
disk_unmount(sd_first_drive+1); /* release "by force", ensure file
descriptors aren't leaked and any busy
ones are invalid if mounting */
/* Force card init for new card, re-init for re-inserted one or
* clear if the last attempt to init failed with an error. */
card_info[1].initialized = 0;
sd_status[1].retry = 0;
if (ev.id == SYS_HOTSWAP_INSERTED)
disk_mount(sd_first_drive+1);
queue_broadcast(SYS_FS_CHANGED, 0);
/* Access is now safe */
mutex_unlock(&sd_mtx);
fat_unlock();
break;
#endif
case SYS_TIMEOUT:
if (TIME_BEFORE(current_tick, last_disk_activity+(3*HZ)))
{
idle_notified = false;
}
else
{
/* never let a timer wrap confuse us */
next_yield = USEC_TIMER;
if (!idle_notified)
{
call_storage_idle_notifys(false);
idle_notified = true;
}
}
break;
case SYS_USB_CONNECTED:
usb_acknowledge(SYS_USB_CONNECTED_ACK);
/* Wait until the USB cable is extracted again */
usb_wait_for_disconnect(&sd_queue);
break;
case SYS_USB_DISCONNECTED:
usb_acknowledge(SYS_USB_DISCONNECTED_ACK);
break;
}
}
}
void sd_enable(bool on)
{
if(on)
{
DEV_EN |= DEV_ATA; /* Enable controller */
}
else
{
DEV_EN &= ~DEV_ATA; /* Disable controller */
}
}
#ifdef HAVE_HOTSWAP
void card_enable_monitoring_target(bool on)
{
if (on)
{
#ifdef SANSA_E200
GPIO_SET_BITWISE(GPIOA_INT_EN, 0x80);
#elif defined(SANSA_C200)
GPIO_SET_BITWISE(GPIOL_INT_EN, 0x08);
#endif
}
else
{
#ifdef SANSA_E200
GPIO_CLEAR_BITWISE(GPIOA_INT_EN, 0x80);
#elif defined(SANSA_C200)
GPIO_CLEAR_BITWISE(GPIOL_INT_EN, 0x08);
#endif
}
}
#endif
int sd_init(void)
{
int ret = 0;
if (!initialized)
mutex_init(&sd_mtx);
mutex_lock(&sd_mtx);
led(false);
if (!initialized)
{
initialized = true;
/* init controller */
#if defined(PHILIPS_SA9200)
GPIOA_ENABLE = 0x00;
GPIO_SET_BITWISE(GPIOD_ENABLE, 0x01);
#else
outl(inl(0x70000088) & ~(0x4), 0x70000088);
outl(inl(0x7000008c) & ~(0x4), 0x7000008c);
GPO32_ENABLE |= 0x4;
GPIO_SET_BITWISE(GPIOG_ENABLE, (0x3 << 5));
GPIO_SET_BITWISE(GPIOG_OUTPUT_EN, (0x3 << 5));
GPIO_SET_BITWISE(GPIOG_OUTPUT_VAL, (0x3 << 5));
#endif
#ifdef HAVE_HOTSWAP
/* enable card detection port - mask interrupt first */
#ifdef SANSA_E200
GPIO_CLEAR_BITWISE(GPIOA_INT_EN, 0x80);
GPIO_CLEAR_BITWISE(GPIOA_OUTPUT_EN, 0x80);
GPIO_SET_BITWISE(GPIOA_ENABLE, 0x80);
#elif defined SANSA_C200
GPIO_CLEAR_BITWISE(GPIOL_INT_EN, 0x08);
GPIO_CLEAR_BITWISE(GPIOL_OUTPUT_EN, 0x08);
GPIO_SET_BITWISE(GPIOL_ENABLE, 0x08);
#endif
#endif
sd_select_device(0);
if (currcard->initialized < 0)
ret = currcard->initialized;
queue_init(&sd_queue, true);
create_thread(sd_thread, sd_stack, sizeof(sd_stack), 0,
sd_thread_name IF_PRIO(, PRIORITY_USER_INTERFACE)
IF_COP(, CPU));
/* enable interupt for the mSD card */
sleep(HZ/10);
#ifdef HAVE_HOTSWAP
#ifdef SANSA_E200
CPU_INT_EN = HI_MASK;
CPU_HI_INT_EN = GPIO0_MASK;
GPIOA_INT_LEV = (0x80 << 8) | (~GPIOA_INPUT_VAL & 0x80);
GPIOA_INT_CLR = 0x80;
#elif defined SANSA_C200
CPU_INT_EN = HI_MASK;
CPU_HI_INT_EN = GPIO2_MASK;
GPIOL_INT_LEV = (0x08 << 8) | (~GPIOL_INPUT_VAL & 0x08);
GPIOL_INT_CLR = 0x08;
#endif
#endif
}
mutex_unlock(&sd_mtx);
return ret;
}
tCardInfo *card_get_info_target(int card_no)
{
return &card_info[card_no];
}
#ifdef HAVE_HOTSWAP
static int sd1_oneshot_callback(struct timeout *tmo)
{
(void)tmo;
/* This is called only if the state was stable for 300ms - check state
* and post appropriate event. */
if (card_detect_target())
queue_broadcast(SYS_HOTSWAP_INSERTED, 0);
else
queue_broadcast(SYS_HOTSWAP_EXTRACTED, 0);
return 0;
}
/* called on insertion/removal interrupt */
void microsd_int(void)
{
static struct timeout sd1_oneshot;
#ifdef SANSA_E200
GPIO_CLEAR_BITWISE(GPIOA_INT_EN, 0x80);
GPIOA_INT_LEV = (0x80 << 8) | (~GPIOA_INPUT_VAL & 0x80);
GPIOA_INT_CLR = 0x80;
GPIO_SET_BITWISE(GPIOA_INT_EN, 0x80);
#elif defined SANSA_C200
GPIO_CLEAR_BITWISE(GPIOL_INT_EN, 0x08);
GPIOL_INT_LEV = (0x08 << 8) | (~GPIOL_INPUT_VAL & 0x08);
GPIOL_INT_CLR = 0x08;
GPIO_SET_BITWISE(GPIOL_INT_EN, 0x08);
#endif
timeout_register(&sd1_oneshot, sd1_oneshot_callback, (3*HZ/10), 0);
}
#endif /* HAVE_HOTSWAP */
long sd_last_disk_activity(void)
{
return last_disk_activity;
}
#ifdef HAVE_HOTSWAP
bool sd_removable(IF_MD_NONVOID(int drive))
{
#ifndef HAVE_MULTIDRIVE
const int drive=0;
#endif
return (drive==1);
}
bool sd_present(IF_MD_NONVOID(int drive))
{
#ifndef HAVE_MULTIDRIVE
const int drive=0;
#endif
if(drive==0)
{
return true;
}
else
{
return card_detect_target();
}
}
#endif
#ifdef CONFIG_STORAGE_MULTI
int sd_num_drives(int first_drive)
{
#ifdef HAVE_HOTSWAP
/* Store which logical drive number(s) we have been assigned */
sd_first_drive = first_drive;
#else
(void)first_drive;
#endif
#ifdef HAVE_MULTIDRIVE
return 2;
#else
return 1;
#endif
}
#endif
Reference in a new issue View git blame Copy permalink