rockbox/firmware/target/arm/imx233/pinctrl-imx233.c
Amaury Pouly 85c32dbd12 imx233/fuze+: add pin irq support
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30195 a1c6a512-1295-4272-9138-f99709370657
2011-07-22 15:45:50 +00:00

77 lines
2.4 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2011 by Amaury Pouly
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "system.h"
#include "system-target.h"
#include "cpu.h"
#include "pinctrl-imx233.h"
static pin_irq_cb_t pin_cb[3][32]; /* 3 banks, 32 pins/bank */
static void INT_GPIO(int bank)
{
uint32_t fire = HW_PINCTRL_IRQSTAT(bank) & HW_PINCTRL_IRQEN(bank);
for(int pin = 0; pin < 32; pin++)
if(fire & (1 << pin))
{
pin_irq_cb_t cb = pin_cb[bank][pin];
imx233_setup_pin_irq(bank, pin, false, false, false, NULL);
if(cb)
cb(bank, pin);
}
}
void INT_GPIO0(void)
{
INT_GPIO(0);
}
void INT_GPIO1(void)
{
INT_GPIO(1);
}
void INT_GPIO2(void)
{
INT_GPIO(2);
}
void imx233_setup_pin_irq(int bank, int pin, bool enable_int,
bool level, bool polarity, pin_irq_cb_t cb)
{
__REG_CLR(HW_PINCTRL_PIN2IRQ(bank)) = 1 << pin;
__REG_CLR(HW_PINCTRL_IRQEN(bank)) = 1 << pin;
__REG_CLR(HW_PINCTRL_IRQSTAT(bank))= 1 << pin;
pin_cb[bank][pin] = cb;
if(enable_int)
{
if(level)
__REG_SET(HW_PINCTRL_IRQLEVEL(bank)) = 1 << pin;
else
__REG_CLR(HW_PINCTRL_IRQLEVEL(bank)) = 1 << pin;
if(polarity)
__REG_SET(HW_PINCTRL_IRQPOL(bank)) = 1 << pin;
else
__REG_CLR(HW_PINCTRL_IRQPOL(bank)) = 1 << pin;
__REG_SET(HW_PINCTRL_PIN2IRQ(bank)) = 1 << pin;
__REG_SET(HW_PINCTRL_IRQEN(bank)) = 1 << pin;
imx233_enable_interrupt(INT_SRC_GPIO(bank), true);
}
}