Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/drivers/lcd-ipod.c
Jens Arnold 4ac150e8d3 Get rid of the redundant APPLE_* macros. * Fix wrong comments in lcd-ipod.c 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@9561 a1c6a512-1295-4272-9138-f99709370657
2006-04-08 09:08:38 +00:00

510 lines
14 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Rockbox driver for iPod LCDs
*
* Based on code from the ipodlinux project - http://ipodlinux.org/
* Adapted for Rockbox in November 2005
*
* Original file: linux/arch/armnommu/mach-ipod/fb.c
*
* Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "lcd.h"
#include "kernel.h"
#include "system.h"
/* check if number of useconds has past */
static inline bool timer_check(int clock_start, int usecs)
{
return ((int)(USEC_TIMER - clock_start)) >= usecs;
}
#if (CONFIG_LCD == LCD_IPOD2BPP)
/*** hardware configuration ***/
#if CONFIG_CPU == PP5002
#define IPOD_LCD_BASE 0xc0001000
#define IPOD_LCD_BUSY_MASK 0x80000000
#else /* PP5020 */
#define IPOD_LCD_BASE 0x70003000
#define IPOD_LCD_BUSY_MASK 0x00008000
#endif
/* LCD command codes for HD66753 */
#define LCD_CMD 0x08
#define LCD_DATA 0x10
#define R_START_OSC 0x00
#define R_DRV_OUTPUT_CONTROL 0x01
#define R_DRV_WAVEFORM_CONTROL 0x02
#define R_POWER_CONTROL 0x03
#define R_CONTRAST_CONTROL 0x04
#define R_ENTRY_MODE 0x05
#define R_ROTATION 0x06
#define R_DISPLAY_CONTROL 0x07
#define R_CURSOR_CONTROL 0x08
#define R_HORIZONTAL_CURSOR_POS 0x0b
#define R_VERTICAL_CURSOR_POS 0x0c
#define R_1ST_SCR_DRV_POS 0x0d
#define R_2ND_SCR_DRV_POS 0x0e
#define R_RAM_WRITE_MASK 0x10
#define R_RAM_ADDR_SET 0x11
#define R_RAM_DATA 0x12
/* needed for flip */
static int addr_offset;
#if defined(IPOD_MINI) || defined(IPOD_MINI2G)
static int pix_offset;
#endif
static const unsigned char dibits[16] ICONST_ATTR = {
0x00, 0x03, 0x0C, 0x0F, 0x30, 0x33, 0x3C, 0x3F,
0xC0, 0xC3, 0xCC, 0xCF, 0xF0, 0xF3, 0xFC, 0xFF
};
/* wait for LCD with timeout */
static inline void lcd_wait_write(void)
{
int start = USEC_TIMER;
do {
if ((inl(IPOD_LCD_BASE) & 0x8000) == 0) break;
} while (timer_check(start, 1000) == 0);
}
/* send LCD data */
static void lcd_send_data(unsigned data)
{
lcd_wait_write();
#ifdef IPOD_MINI2G
outl((inl(IPOD_LCD_BASE) & ~0x1f00000) | 0x1700000, IPOD_LCD_BASE);
outl(data | 0x760000, IPOD_LCD_BASE+8);
#else
outl(data >> 8, IPOD_LCD_BASE + LCD_DATA);
lcd_wait_write();
outl(data & 0xff, IPOD_LCD_BASE + LCD_DATA);
#endif
}
/* send LCD command */
static void lcd_prepare_cmd(unsigned cmd)
{
lcd_wait_write();
#ifdef IPOD_MINI2G
outl((inl(IPOD_LCD_BASE) & ~0x1f00000) | 0x1700000, IPOD_LCD_BASE);
outl(cmd | 0x740000, IPOD_LCD_BASE+8);
#else
outl(0x0, IPOD_LCD_BASE + LCD_CMD);
lcd_wait_write();
outl(cmd, IPOD_LCD_BASE + LCD_CMD);
#endif
}
/* send LCD command and data */
static void lcd_cmd_and_data(unsigned cmd, unsigned data)
{
lcd_prepare_cmd(cmd);
lcd_send_data(data);
}
/* LCD init */
void lcd_init_device(void)
{
lcd_cmd_and_data(R_DISPLAY_CONTROL, 0x0015);
lcd_set_flip(false);
lcd_cmd_and_data(R_ENTRY_MODE, 0x0000);
#ifdef IPOD_4G
outl(inl(0x6000d004) | 0x4, 0x6000d004); /* B02 enable */
outl(inl(0x6000d004) | 0x8, 0x6000d004); /* B03 enable */
outl(inl(0x70000084) | 0x2000000, 0x70000084); /* D01 enable */
outl(inl(0x70000080) | 0x2000000, 0x70000080); /* D01 =1 */
outl(inl(0x6000600c) | 0x20000, 0x6000600c); /* PWM enable */
#endif
}
/*** hardware configuration ***/
/* Rockbox stores the contrast as 0..63 - we add 64 to it */
void lcd_set_contrast(int val)
{
if (val < 0) val = 0;
else if (val > 63) val = 63;
lcd_cmd_and_data(R_CONTRAST_CONTROL, 0x400 | (val + 64));
}
void lcd_set_invert_display(bool yesno)
{
if (yesno)
lcd_cmd_and_data(R_DISPLAY_CONTROL, 0x0017);
else
lcd_cmd_and_data(R_DISPLAY_CONTROL, 0x0015);
}
/* turn the display upside down (call lcd_update() afterwards) */
void lcd_set_flip(bool yesno)
{
#if defined(IPOD_MINI) || defined(IPOD_MINI2G)
if (yesno) {
/* 168x112, inverse COM order */
lcd_cmd_and_data(R_DRV_OUTPUT_CONTROL, 0x020d);
lcd_cmd_and_data(R_1ST_SCR_DRV_POS, 0x8316); /* 22..131 */
addr_offset = (22 << 5) | (20 - 4);
pix_offset = -2;
} else {
/* 168x112, inverse SEG order */
lcd_cmd_and_data(R_DRV_OUTPUT_CONTROL, 0x010d);
lcd_cmd_and_data(R_1ST_SCR_DRV_POS, 0x6d00); /* 0..109 */
addr_offset = 20;
pix_offset = 0;
}
#else
if (yesno) {
/* 168x128, inverse SEG & COM order */
lcd_cmd_and_data(R_DRV_OUTPUT_CONTROL, 0x030f);
lcd_cmd_and_data(R_1ST_SCR_DRV_POS, 0x8304); /* 4..131 */
addr_offset = (4 << 5) | (20 - 1);
} else {
/* 168x128 */
lcd_cmd_and_data(R_DRV_OUTPUT_CONTROL, 0x000f);
lcd_cmd_and_data(R_1ST_SCR_DRV_POS, 0x7f00); /* 0..127 */
addr_offset = 20;
}
#endif
}
/*** update functions ***/
/* Performance function that works with an external buffer
note that x, bwidtht and stride are in 8-pixel units! */
void lcd_blit(const unsigned char* data, int bx, int y, int bwidth,
int height, int stride)
{
const unsigned char *src, *src_end;
while (height--) {
src = data;
src_end = data + bwidth;
lcd_cmd_and_data(R_RAM_ADDR_SET, (y++ << 5) + addr_offset - bx);
lcd_prepare_cmd(R_RAM_DATA);
do {
unsigned byte = *src++;
lcd_send_data((dibits[byte>>4] << 8) | dibits[byte&0x0f]);
} while (src < src_end);
data += stride;
}
}
void lcd_update_rect(int x, int y, int width, int height)
{
int xmax, ymax;
if (x + width > LCD_WIDTH)
width = LCD_WIDTH - x;
if (width <= 0)
return;
ymax = y + height - 1;
if (ymax >= LCD_HEIGHT)
ymax = LCD_HEIGHT - 1;
#if defined(IPOD_MINI) || defined(IPOD_MINI2G)
x += pix_offset;
#endif
/* writing is done in 16-bit units (8 pixels) */
xmax = (x + width - 1) >> 3;
x >>= 3;
width = xmax - x + 1;
for (; y <= ymax; y++) {
unsigned char *data, *data_end;
lcd_cmd_and_data(R_RAM_ADDR_SET, (y << 5) + addr_offset - x);
lcd_prepare_cmd(R_RAM_DATA);
data = &lcd_framebuffer[y][2*x];
data_end = data + 2 * width;
#if defined(IPOD_MINI) || defined(IPOD_MINI2G)
if (pix_offset == -2) {
unsigned cur_word = *data++;
do {
cur_word = (cur_word << 8) | *data++;
cur_word = (cur_word << 8) | *data++;
lcd_send_data((cur_word >> 4) & 0xffff);
} while (data <= data_end);
} else
#endif
{
do {
unsigned highbyte = *data++;
lcd_send_data((highbyte << 8) | *data++);
} while (data < data_end);
}
}
}
/* Update the display. */
void lcd_update(void)
{
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
}
#else
#define IPOD_LCD_BASE 0x70008a0c
#define IPOD_LCD_BUSY_MASK 0x80000000
/* LCD command codes for HD66789R */
#define LCD_CNTL_RAM_ADDR_SET 0x21
#define LCD_CNTL_WRITE_TO_GRAM 0x22
#define LCD_CNTL_HORIZ_RAM_ADDR_POS 0x44
#define LCD_CNTL_VERT_RAM_ADDR_POS 0x45
/*** globals ***/
static int lcd_type = 1; /* 0 = "old" Color/Photo, 1 = "new" Color & Nano */
static void lcd_wait_write(void)
{
if ((inl(IPOD_LCD_BASE) & IPOD_LCD_BUSY_MASK) != 0) {
int start = USEC_TIMER;
do {
if ((inl(IPOD_LCD_BASE) & IPOD_LCD_BUSY_MASK) == 0) break;
} while (timer_check(start, 1000) == 0);
}
}
static void lcd_send_lo(int v)
{
lcd_wait_write();
outl(v | 0x80000000, IPOD_LCD_BASE);
}
static void lcd_send_hi(int v)
{
lcd_wait_write();
outl(v | 0x81000000, IPOD_LCD_BASE);
}
static void lcd_cmd_data(int cmd, int data)
{
if (lcd_type == 0) {
lcd_send_lo(cmd);
lcd_send_lo(data);
} else {
lcd_send_lo(0x0);
lcd_send_lo(cmd);
lcd_send_hi((data >> 8) & 0xff);
lcd_send_hi(data & 0xff);
}
}
/*** hardware configuration ***/
void lcd_set_contrast(int val)
{
/* TODO: Implement lcd_set_contrast() */
(void)val;
}
void lcd_set_invert_display(bool yesno)
{
/* TODO: Implement lcd_set_invert_display() */
(void)yesno;
}
/* turn the display upside down (call lcd_update() afterwards) */
void lcd_set_flip(bool yesno)
{
/* TODO: Implement lcd_set_flip() */
(void)yesno;
}
/* LCD init */
void lcd_init_device(void)
{
#if CONFIG_LCD == LCD_IPODCOLOR
if (ipod_hw_rev == 0x60000) {
lcd_type = 0;
} else {
int gpio_a01, gpio_a04;
/* A01 */
gpio_a01 = (inl(0x6000D030) & 0x2) >> 1;
/* A04 */
gpio_a04 = (inl(0x6000D030) & 0x10) >> 4;
if (((gpio_a01 << 1) | gpio_a04) == 0 || ((gpio_a01 << 1) | gpio_a04) == 2) {
lcd_type = 0;
} else {
lcd_type = 1;
}
}
outl(inl(0x6000d004) | 0x4, 0x6000d004); /* B02 enable */
outl(inl(0x6000d004) | 0x8, 0x6000d004); /* B03 enable */
outl(inl(0x70000084) | 0x2000000, 0x70000084); /* D01 enable */
outl(inl(0x70000080) | 0x2000000, 0x70000080); /* D01 =1 */
outl(inl(0x6000600c) | 0x20000, 0x6000600c); /* PWM enable */
#elif CONFIG_LCD == LCD_IPODNANO
/* iPodLinux doesn't appear have any LCD init code for the Nano */
#endif
}
/*** update functions ***/
/* Performance function that works with an external buffer
note that by and bheight are in 4-pixel units! */
void lcd_blit(const fb_data* data, int x, int by, int width,
int bheight, int stride)
{
/* TODO: Implement lcd_blit() */
(void)data;
(void)x;
(void)by;
(void)width;
(void)bheight;
(void)stride;
}
/* Update a fraction of the display. */
void lcd_update_rect(int x, int y, int width, int height)
{
int y0, x0, y1, x1;
int newx,newwidth;
unsigned long *addr = (unsigned long *)lcd_framebuffer;
/* Ensure x and width are both even - so we can read 32-bit aligned
data from lcd_framebuffer */
newx=x&~1;
newwidth=width&~1;
if (newx+newwidth < x+width) { newwidth+=2; }
x=newx; width=newwidth;
/* calculate the drawing region */
#if CONFIG_LCD == LCD_IPODNANO
y0 = x; /* start horiz */
x0 = y; /* start vert */
y1 = (x + width) - 1; /* max horiz */
x1 = (y + height) - 1; /* max vert */
#elif CONFIG_LCD == LCD_IPODCOLOR
y0 = y; /* start vert */
x0 = (LCD_WIDTH - 1) - x; /* start horiz */
y1 = (y + height) - 1; /* end vert */
x1 = (x0 - width) + 1; /* end horiz */
#endif
/* setup the drawing region */
if (lcd_type == 0) {
lcd_cmd_data(0x12, y0); /* start vert */
lcd_cmd_data(0x13, x0); /* start horiz */
lcd_cmd_data(0x15, y1); /* end vert */
lcd_cmd_data(0x16, x1); /* end horiz */
} else {
/* swap max horiz < start horiz */
if (y1 < y0) {
int t;
t = y0;
y0 = y1;
y1 = t;
}
/* swap max vert < start vert */
if (x1 < x0) {
int t;
t = x0;
x0 = x1;
x1 = t;
}
/* max horiz << 8 | start horiz */
lcd_cmd_data(LCD_CNTL_HORIZ_RAM_ADDR_POS, (y1 << 8) | y0);
/* max vert << 8 | start vert */
lcd_cmd_data(LCD_CNTL_VERT_RAM_ADDR_POS, (x1 << 8) | x0);
/* start vert = max vert */
#if CONFIG_LCD == LCD_IPODCOLOR
x0 = x1;
#endif
/* position cursor (set AD0-AD15) */
/* start vert << 8 | start horiz */
lcd_cmd_data(LCD_CNTL_RAM_ADDR_SET, ((x0 << 8) | y0));
/* start drawing */
lcd_send_lo(0x0);
lcd_send_lo(LCD_CNTL_WRITE_TO_GRAM);
}
addr = (unsigned long*)&lcd_framebuffer[y][x];
while (height > 0) {
int c, r;
int h, pixels_to_write;
pixels_to_write = (width * height) * 2;
h = height;
/* calculate how much we can do in one go */
if (pixels_to_write > 64000) {
h = (64000/2) / width;
pixels_to_write = (width * h) * 2;
}
outl(0x10000080, 0x70008a20);
outl((pixels_to_write - 1) | 0xc0010000, 0x70008a24);
outl(0x34000000, 0x70008a20);
/* for each row */
for (r = 0; r < h; r++) {
/* for each column */
for (c = 0; c < width; c += 2) {
while ((inl(0x70008a20) & 0x1000000) == 0);
/* output 2 pixels */
outl(*(addr++), 0x70008b00);
}
addr += (LCD_WIDTH - width)/2;
}
while ((inl(0x70008a20) & 0x4000000) == 0);
outl(0x0, 0x70008a24);
height = height - h;
}
}
/* Update the display.
This must be called after all other LCD functions that change the display. */
void lcd_update(void)
{
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
}
#endif
Reference in a new issue View git blame Copy permalink