Michael Sevakis 71372162b1 Enable write buffering for the 1MB device memory section. This means using a different device framebuffer address too. You must update the firmware _and_ bootloader. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17458 a1c6a512-1295-4272-9138-f99709370657		2008-05-11 15:39:00 +00:00
..
gigabeat-s	Fix yellow.	2008-05-10 18:32:34 +00:00
app.lds	Real fake IRAM by placing .i.... section in the analagous DRAM sections in the linker scripts that hasn't done this yet.	2008-05-10 22:03:45 +00:00
boot.lds	Gigabeat S bootloader: 1) Switch order of .vectors to be contiguous with initialized sections. 2) Clean all caches in main before doing anything else because vector copying counts as self-modifying code. Up to v.00000012.	2008-05-05 13:30:29 +00:00
crt0.S	Enable write buffering for the 1MB device memory section. This means using a different device framebuffer address too. You must update the firmware _and_ bootloader.	2008-05-11 15:39:00 +00:00
debug-imx31.c	Gigabeat S: Use the fastest PIO mode the installed drive allows instead of always PIO0. Centralize clock information in clkctl-imx31.c.	2008-05-05 10:53:06 +00:00
debug-target.h	Add a "View I/O Ports" screen for imx31. Show all GPIO contents.	2008-04-11 15:49:48 +00:00
rolo_restart.S	Gigabeat S RoLo: Properly execute firmware copy from an IRAM stub because the currently running image was being overwritten in place. Minor tweak to rolo.c based on imx31 errata sheet about not masking FIQ without masking IRQ which is fine to use on all ARM anyway.	2008-05-08 12:09:14 +00:00