Michael Sevakis 60efd38bbe Gigabeat: Use vectored IRQ mode interrupts and add a trap for unhandled ones. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13792 a1c6a512-1295-4272-9138-f99709370657		2007-07-05 07:14:24 +00:00
..
adc-meg-fx.c
adc-target.h
ata-meg-fx.c	Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized.	2007-05-07 19:34:34 +00:00
ata-target.h
backlight-meg-fx.c	Gigabeat Button/Backlight update: Reduce the number of writes to the sc606 when control registers are not changing. Fix up some buttonlight bugs. Add in full sc606 initialization during the backlight init.	2007-05-14 05:04:21 +00:00
backlight-target.h	More Gigabeat button light fixes. Settings now work properly, startup does not cause the button lights to flash when disabled. Buttonlights are now shutdown on power off.	2007-05-10 03:08:47 +00:00
button-meg-fx.c	add separate button defines for the Gigabeat remote control	2007-05-20 11:42:04 +00:00
button-target.h	add separate button defines for the Gigabeat remote control	2007-05-20 11:42:04 +00:00
dma_start.c
i2c-meg-fx.c	Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'.	2007-06-26 02:11:30 +00:00
i2c-meg-fx.h	Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'.	2007-06-26 02:11:30 +00:00
kernel-meg-fx.c
lcd-as-meg-fx.S
lcd-meg-fx.c	Commit part of FS7113: This adds proper LCD initialization to the gigabeat thanks to Alex Gerchanovsky	2007-06-04 14:07:26 +00:00
lcd-target.h
mmu-meg-fx.c
mmu-meg-fx.h
pcm-meg-fx.c	Gigabeat: Audio tweak mishmash - Make sure zero crossing detection times out so the volume always gets updated. Make sure i2s is off at boot and set to proper mode before audio hardware is initialized. Make pausing pcm instant instead of waiting until the end of the current DMA transfer.	2007-06-24 20:41:27 +00:00
power-meg-fx.c	Make sure that the IDE power pin is properly initialized	2007-05-15 00:22:51 +00:00
sc606-meg-fx.c	revert the last changes because they prevent some Gigabeats from shutting down	2007-05-11 16:42:53 +00:00
sc606-meg-fx.h
system-meg-fx.c	Gigabeat: Use vectored IRQ mode interrupts and add a trap for unhandled ones.	2007-07-05 07:14:24 +00:00
system-target.h
usb-meg-fx.c	only go into USB mode when the cradle is powered	2007-06-23 18:25:41 +00:00
usb-target.h
wmcodec-meg-fx.c	Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'.	2007-06-26 02:11:30 +00:00