Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/imx31/dvfs_dptc-imx31.c

702 lines
18 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2010 by Michael Sevakis
*
* i.MX31 DVFS and DPTC drivers
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "logf.h"
#include "mc13783.h"
#include "iomuxc-imx31.h"
#include "ccm-imx31.h"
#include "avic-imx31.h"
#include "dvfs_dptc-imx31.h"
#include "dvfs_dptc_tables-target.h"
/* Most of the code in here is based upon the Linux BSP provided by Freescale
* Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. */
/* The current DVFS index level */
static volatile unsigned int dvfs_level = DVFS_LEVEL_DEFAULT;
/* The current DPTC working point */
static volatile unsigned int dptc_wp = DPTC_WP_DEFAULT;
static void update_dptc_counts(unsigned int level, unsigned int wp)
{
int oldlevel = disable_irq_save();
const struct dptc_dcvr_table_entry *entry = &dptc_dcvr_table[level][wp];
CCM_DCVR0 = entry->dcvr0;
CCM_DCVR1 = entry->dcvr1;
CCM_DCVR2 = entry->dcvr2;
CCM_DCVR3 = entry->dcvr3;
restore_irq(oldlevel);
}
static uint32_t check_regulator_setting(uint32_t setting)
{
/* Simply a safety check *in case* table gets scrambled */
if (setting < VOLTAGE_SETTING_MIN)
setting = VOLTAGE_SETTING_MIN;
else if (setting > VOLTAGE_SETTING_MAX)
setting = VOLTAGE_SETTING_MAX;
return setting;
}
/** DVFS **/
static bool dvfs_running = false; /* Has driver enabled DVFS? */
/* Request tracking since boot */
unsigned int dvfs_nr_dn = 0;
unsigned int dvfs_nr_up = 0;
unsigned int dvfs_nr_pnc = 0;
static void dvfs_stop(void);
/* Wait for the UPDTEN flag to be set so that all bits may be written */
static inline void wait_for_dvfs_update_en(void)
{
while (!(CCM_PMCR0 & CCM_PMCR0_UPDTEN));
}
static void do_dvfs_update(unsigned int level)
{
const struct dvfs_clock_table_entry *setting = &dvfs_clock_table[level];
unsigned long pmcr0 = CCM_PMCR0;
if (pmcr0 & CCM_PMCR0_DPTEN)
{
/* Ignore voltage change request from DPTC. Voltage is *not* valid. */
pmcr0 &= ~CCM_PMCR0_DPVCR;
}
pmcr0 &= ~CCM_PMCR0_VSCNT;
if (level > ((pmcr0 & CCM_PMCR0_DVSUP) >> CCM_PMCR0_DVSUP_POS))
{
pmcr0 |= CCM_PMCR0_UDSC; /* Up scaling, increase */
pmcr0 |= setting->vscnt << CCM_PMCR0_VSCNT_POS;
}
else
{
pmcr0 &= ~CCM_PMCR0_UDSC; /* Down scaling, decrease */
pmcr0 |= 0x1 << CCM_PMCR0_VSCNT_POS;
}
/* DVSUP (new frequency index) setup */
pmcr0 = (pmcr0 & ~CCM_PMCR0_DVSUP) | (level << CCM_PMCR0_DVSUP_POS);
dvfs_level = level;
if ((setting->pll_num << CCM_PMCR0_DFSUP_MCUPLL_POS) ^
(pmcr0 & CCM_PMCR0_DFSUP_MCUPLL))
{
/* Update pll and post-dividers. */
pmcr0 ^= CCM_PMCR0_DFSUP_MCUPLL;
pmcr0 &= ~CCM_PMCR0_DFSUP_POST_DIVIDERS;
}
else
{
/* Post-dividers update only */
pmcr0 |= CCM_PMCR0_DFSUP_POST_DIVIDERS;
}
CCM_PMCR0 = pmcr0;
udelay(100); /* Software wait for voltage ramp-up */
CCM_PDR0 = setting->pdr_val;
if (!(pmcr0 & CCM_PMCR0_DFSUP_POST_DIVIDERS))
{
/* Update the PLL settings */
if (pmcr0 & CCM_PMCR0_DFSUP_MCUPLL)
CCM_MPCTL = setting->pll_val;
else
CCM_SPCTL = setting->pll_val;
}
cpu_frequency = ccm_get_mcu_clk();
if (pmcr0 & CCM_PMCR0_DPTEN)
{
update_dptc_counts(level, dptc_wp);
/* Enable DPTC to request voltage changes. Voltage is valid. */
CCM_PMCR0 |= CCM_PMCR0_DPVCR;
udelay(2);
CCM_PMCR0 |= CCM_PMCR0_DPVV;
}
}
/* Start DVFS, change the set point and stop it */
static void set_current_dvfs_level(unsigned int level)
{
int oldlevel = disable_irq_save();
CCM_PMCR0 |= CCM_PMCR0_DVFEN;
wait_for_dvfs_update_en();
do_dvfs_update(level);
wait_for_dvfs_update_en();
CCM_PMCR0 &= ~CCM_PMCR0_DVFEN;
restore_irq(oldlevel);
}
/* DVFS Interrupt handler */
static void __attribute__((used)) dvfs_int(void)
{
unsigned long pmcr0 = CCM_PMCR0;
unsigned long fsvai = pmcr0 & CCM_PMCR0_FSVAI;
unsigned int level = (pmcr0 & CCM_PMCR0_DVSUP) >> CCM_PMCR0_DVSUP_POS;
if (pmcr0 & CCM_PMCR0_FSVAIM)
return; /* Do nothing. DVFS interrupt is masked. */
if (!(pmcr0 & CCM_PMCR0_UPDTEN))
return; /* Do nothing. DVFS didn't finish previous flow update. */
switch (fsvai)
{
case CCM_PMCR0_FSVAI_DECREASE:
if (level >= DVFS_NUM_LEVELS - 1)
return; /* DVFS already at lowest level */
/* Upon the DECREASE event, the frequency will be changed to the next
* higher state index. */
level++;
dvfs_nr_dn++;
break;
/* Single-step frequency increase */
case CCM_PMCR0_FSVAI_INCREASE:
if (level == 0)
return; /* DVFS already at highest level */
/* Upon the INCREASE event, the frequency will be changed to the next
* lower state index. */
level--;
dvfs_nr_up++;
break;
/* Right to highest if panic */
case CCM_PMCR0_FSVAI_INCREASE_NOW:
if (level == 0)
return; /* DVFS already at highest level */
/* Upon the INCREASE_NOW event, the frequency will be increased to
* the maximum (index 0). */
level = 0;
dvfs_nr_pnc++;
break;
case CCM_PMCR0_FSVAI_NO_INT:
default:
return; /* Do nothing. Freq change is not required */
} /* end switch */
do_dvfs_update(level);
}
/* Interrupt vector for DVFS */
static __attribute__((naked, interrupt("IRQ"))) void CCM_DVFS_HANDLER(void)
{
/* Audio can glitch with the long udelay if nested IRQ isn't allowed. */
AVIC_NESTED_NI_CALL_PROLOGUE();
asm volatile ("bl dvfs_int");
AVIC_NESTED_NI_CALL_EPILOGUE();
}
/* Initialize the DVFS hardware */
static void dvfs_init(void)
{
if (CCM_PMCR0 & CCM_PMCR0_DVFEN)
{
/* Turn it off first. Really, shouldn't happen though. */
dvfs_running = true;
dvfs_stop();
}
/* Combine SW1A and SW1B DVS pins for a possible five DVS levels
* per working point. Four, MAXIMUM, are actually used, one for each
* frequency. */
mc13783_set(MC13783_ARBITRATION_SWITCHERS, MC13783_SW1ABDVS);
/* Set DVS speed to 25mV every 4us. */
mc13783_write_masked(MC13783_SWITCHERS4, MC13783_SW1ADVSSPEED_4US,
MC13783_SW1ADVSSPEED);
/* Set DVFS pins to functional outputs. Input mode and pad setting is
* fixed in hardware. */
iomuxc_set_pin_mux(IOMUXC_DVFS0,
IOMUXC_MUX_OUT_FUNCTIONAL | IOMUXC_MUX_IN_NONE);
iomuxc_set_pin_mux(IOMUXC_DVFS1,
IOMUXC_MUX_OUT_FUNCTIONAL | IOMUXC_MUX_IN_NONE);
#ifndef DVFS_NO_PWRRDY
/* Configure PWRRDY signal pin. */
imx31_regclr32(&GPIO1_GDIR, (1 << 5));
iomuxc_set_pin_mux(IOMUXC_GPIO1_5,
IOMUXC_MUX_OUT_FUNCTIONAL | IOMUXC_MUX_IN_FUNCTIONAL);
#endif
/* Initialize DVFS signal weights and detection modes. */
int i;
for (i = 0; i < 16; i++)
{
dvfs_set_lt_weight(i, lt_signals[i].weight);
dvfs_set_lt_detect(i, lt_signals[i].detect);
}
/* Set up LTR0. */
imx31_regmod32(&CCM_LTR0,
DVFS_UPTHR << CCM_LTR0_UPTHR_POS |
DVFS_DNTHR << CCM_LTR0_DNTHR_POS |
DVFS_DIV3CK,
CCM_LTR0_UPTHR | CCM_LTR0_DNTHR | CCM_LTR0_DIV3CK);
/* Set up LTR1. */
imx31_regmod32(&CCM_LTR1,
DVFS_DNCNT << CCM_LTR1_DNCNT_POS |
DVFS_UPCNT << CCM_LTR1_UPCNT_POS |
DVFS_PNCTHR << CCM_LTR1_PNCTHR_POS |
CCM_LTR1_LTBRSR,
CCM_LTR1_DNCNT | CCM_LTR1_UPCNT |
CCM_LTR1_PNCTHR | CCM_LTR1_LTBRSR);
/* Set up LTR2-- EMA configuration. */
imx31_regmod32(&CCM_LTR2, DVFS_EMAC << CCM_LTR2_EMAC_POS,
CCM_LTR2_EMAC);
/* DVFS interrupt goes to MCU. Mask load buffer full interrupt. */
imx31_regset32(&CCM_PMCR0, CCM_PMCR0_DVFIS | CCM_PMCR0_LBMI);
/* Initialize current core PLL and dividers for default level. Assumes
* clocking scheme has been set up appropriately in other init code. */
ccm_set_mcupll_and_pdr(dvfs_clock_table[DVFS_LEVEL_DEFAULT].pll_val,
dvfs_clock_table[DVFS_LEVEL_DEFAULT].pdr_val);
/* Set initial level and working point. */
set_current_dvfs_level(DVFS_LEVEL_DEFAULT);
logf("DVFS: Initialized");
}
/* Start the DVFS hardware */
static void dvfs_start(void)
{
int oldlevel;
/* Have to wait at least 3 div3 clocks before enabling after being
* stopped. */
udelay(1500);
oldlevel = disable_irq_save();
if (!dvfs_running)
{
dvfs_running = true;
/* Unmask DVFS interrupt source and enable DVFS. */
avic_enable_int(INT_CCM_DVFS, INT_TYPE_IRQ, INT_PRIO_DVFS,
CCM_DVFS_HANDLER);
CCM_PMCR0 = (CCM_PMCR0 & ~CCM_PMCR0_FSVAIM) | CCM_PMCR0_DVFEN;
}
restore_irq(oldlevel);
logf("DVFS: started");
}
/* Stop the DVFS hardware and return to default frequency */
static void dvfs_stop(void)
{
int oldlevel = disable_irq_save();
if (dvfs_running)
{
/* Mask DVFS interrupts. */
CCM_PMCR0 |= CCM_PMCR0_FSVAIM | CCM_PMCR0_LBMI;
avic_disable_int(INT_CCM_DVFS);
if (((CCM_PMCR0 & CCM_PMCR0_DVSUP) >> CCM_PMCR0_DVSUP_POS) !=
DVFS_LEVEL_DEFAULT)
{
/* Set default frequency level */
wait_for_dvfs_update_en();
do_dvfs_update(DVFS_LEVEL_DEFAULT);
wait_for_dvfs_update_en();
}
/* Disable DVFS. */
CCM_PMCR0 &= ~CCM_PMCR0_DVFEN;
dvfs_running = false;
}
restore_irq(oldlevel);
logf("DVFS: stopped");
}
/** DPTC **/
/* Request tracking since boot */
static bool dptc_running = false; /* Has driver enabled DPTC? */
unsigned int dptc_nr_dn = 0;
unsigned int dptc_nr_up = 0;
unsigned int dptc_nr_pnc = 0;
static struct spi_transfer_desc dptc_pmic_xfer; /* Transfer descriptor */
static const unsigned char dptc_pmic_regs[2] = /* Register subaddresses */
{ MC13783_SWITCHERS0, MC13783_SWITCHERS1 };
static uint32_t dptc_reg_shadows[2]; /* shadow regs */
static uint32_t dptc_regs_buf[2]; /* buffer for async write */
/* Enable DPTC and unmask interrupt. */
static void enable_dptc(void)
{
int oldlevel = disable_irq_save();
/* Enable DPTC, assert voltage change request. */
CCM_PMCR0 = (CCM_PMCR0 & ~CCM_PMCR0_PTVAIM) | CCM_PMCR0_DPTEN |
CCM_PMCR0_DPVCR;
udelay(2);
/* Set voltage valid *after* setting change request */
CCM_PMCR0 |= CCM_PMCR0_DPVV;
restore_irq(oldlevel);
}
/* Called after final PMIC read is completed */
static void dptc_transfer_done_callback(struct spi_transfer_desc *xfer)
{
if (xfer->count != 0)
return;
update_dptc_counts(dvfs_level, dptc_wp);
if (dptc_running)
enable_dptc();
}
/* Handle the DPTC interrupt and sometimes the manual setting */
static void dptc_int(unsigned long pmcr0)
{
const union dvfs_dptc_voltage_table_entry *entry;
uint32_t sw1a, sw1advs, sw1bdvs, sw1bstby;
uint32_t switchers0, switchers1;
int wp = dptc_wp;
/* Mask DPTC interrupt and disable DPTC until the change request is
* serviced. */
CCM_PMCR0 = (pmcr0 & ~CCM_PMCR0_DPTEN) | CCM_PMCR0_PTVAIM;
switch (pmcr0 & CCM_PMCR0_PTVAI)
{
case CCM_PMCR0_PTVAI_DECREASE:
wp++;
dptc_nr_dn++;
break;
case CCM_PMCR0_PTVAI_INCREASE:
wp--;
dptc_nr_up++;
break;
case CCM_PMCR0_PTVAI_INCREASE_NOW:
if (--wp > DPTC_WP_PANIC)
wp = DPTC_WP_PANIC;
dptc_nr_pnc++;
break;
case CCM_PMCR0_PTVAI_NO_INT:
break; /* Just maintain at global level */
}
if (wp < 0)
wp = 0;
else if (wp >= DPTC_NUM_WP)
wp = DPTC_NUM_WP - 1;
entry = &dvfs_dptc_voltage_table[wp];
sw1a = check_regulator_setting(entry->sw1a);
sw1advs = check_regulator_setting(entry->sw1advs);
sw1bdvs = check_regulator_setting(entry->sw1bdvs);
sw1bstby = check_regulator_setting(entry->sw1bstby);
switchers0 = dptc_reg_shadows[0] & ~(MC13783_SW1A | MC13783_SW1ADVS);
dptc_regs_buf[0] = switchers0 |
sw1a << MC13783_SW1A_POS | /* SW1A */
sw1advs << MC13783_SW1ADVS_POS; /* SW1ADVS */
switchers1 = dptc_reg_shadows[1] & ~(MC13783_SW1BDVS | MC13783_SW1BSTBY);
dptc_regs_buf[1] = switchers1 |
sw1bdvs << MC13783_SW1BDVS_POS | /* SW1BDVS */
sw1bstby << MC13783_SW1BSTBY_POS; /* SW1BSTBY */
dptc_wp = wp;
mc13783_write_async(&dptc_pmic_xfer, dptc_pmic_regs,
dptc_regs_buf, 2, dptc_transfer_done_callback);
}
static void dptc_new_wp(unsigned int wp)
{
dptc_wp = wp;
/* "NO_INT" so the working point isn't incremented, just set. */
dptc_int((CCM_PMCR0 & ~CCM_PMCR0_PTVAI) | CCM_PMCR0_PTVAI_NO_INT);
}
/* Interrupt vector for DPTC */
static __attribute__((interrupt("IRQ"))) void CCM_CLK_HANDLER(void)
{
dptc_int(CCM_PMCR0);
}
/* Initialize the DPTC hardware */
static void dptc_init(void)
{
/* Force DPTC off if running for some reason. */
imx31_regmod32(&CCM_PMCR0, CCM_PMCR0_PTVAIM,
CCM_PMCR0_PTVAIM | CCM_PMCR0_DPTEN);
/* Shadow the regulator registers */
mc13783_read_regs(dptc_pmic_regs, dptc_reg_shadows, 2);
/* Set default, safe working point. */
dptc_new_wp(DPTC_WP_DEFAULT);
/* Interrupt goes to MCU, specified reference circuits enabled when
* DPTC is active. */
imx31_regset32(&CCM_PMCR0, CCM_PMCR0_PTVIS);
imx31_regmod32(&CCM_PMCR0, DPTC_DRCE_MASK,
CCM_PMCR0_DRCE0 | CCM_PMCR0_DRCE1 |
CCM_PMCR0_DRCE2 | CCM_PMCR0_DRCE3);
/* DPTC counting range = 256 system clocks */
imx31_regclr32(&CCM_PMCR0, CCM_PMCR0_DCR);
logf("DPTC: Initialized");
}
/* Start DPTC module */
static void dptc_start(void)
{
int oldlevel = disable_irq_save();
if (!dptc_running)
{
dptc_running = true;
/* Enable DPTC and unmask interrupt. */
avic_enable_int(INT_CCM_CLK, INT_TYPE_IRQ, INT_PRIO_DPTC,
CCM_CLK_HANDLER);
update_dptc_counts(dvfs_level, dptc_wp);
enable_dptc();
}
restore_irq(oldlevel);
logf("DPTC: started");
}
/* Stop the DPTC hardware if running and go back to default working point */
static void dptc_stop(void)
{
int oldlevel = disable_irq_save();
if (dptc_running)
{
/* Disable DPTC and mask interrupt. */
CCM_PMCR0 = (CCM_PMCR0 & ~CCM_PMCR0_DPTEN) | CCM_PMCR0_PTVAIM;
avic_disable_int(INT_CCM_CLK);
dptc_running = false;
}
/* Go back to default working point. */
dptc_new_wp(DPTC_WP_DEFAULT);
restore_irq(oldlevel);
logf("DPTC: stopped");
}
/** Main module interface **/
/* Initialize DVFS and DPTC */
void dvfs_dptc_init(void)
{
dptc_init();
dvfs_init();
}
/* Start DVFS and DPTC */
void dvfs_dptc_start(void)
{
dvfs_start();
dptc_start();
}
/* Stop DVFS and DPTC */
void dvfs_dptc_stop(void)
{
dptc_stop();
dvfs_stop();
}
/* Set a signal load tracking weight */
void dvfs_set_lt_weight(enum DVFS_LT_SIGS index, unsigned long value)
{
volatile unsigned long *reg_p = &CCM_LTR2;
unsigned int shift = 3 * index;
if (index < 9)
{
reg_p = &CCM_LTR3;
shift += 5; /* Bits 7:5, 10:8 ... 31:29 */
}
else if (index < 16)
{
shift -= 16; /* Bits 13:11, 16:14 ... 31:29 */
}
imx31_regmod32(reg_p, value << shift, 0x7 << shift);
}
/* Set a signal load detection mode */
void dvfs_set_lt_detect(enum DVFS_LT_SIGS index, bool edge)
{
unsigned long bit = 0;
if ((unsigned)index < 13)
bit = 1ul << (index + 3);
else if ((unsigned)index < 16)
bit = 1ul << (index + 29);
imx31_regmod32(&CCM_LTR0, edge ? bit : 0, bit);
}
void dvfs_set_gp_bit(enum DVFS_DVGPS dvgp, bool assert)
{
if ((unsigned)dvgp <= 3)
{
unsigned long bit = 1ul << dvgp;
imx31_regmod32(&CCM_PMCR1, assert ? bit : 0, bit);
}
}
/* Turn the wait-for-interrupt monitoring on or off */
void dvfs_wfi_monitor(bool on)
{
imx31_regmod32(&CCM_PMCR0, on ? 0 : CCM_PMCR0_WFIM,
CCM_PMCR0_WFIM);
}
/* Obtain the current core voltage setting, in millivolts 8-) */
unsigned int dvfs_dptc_get_voltage(void)
{
unsigned int v;
int oldlevel = disable_irq_save();
v = dvfs_dptc_voltage_table[dptc_wp].sw[dvfs_level];
restore_irq(oldlevel);
/* 25mV steps from 0.900V to 1.675V */
return v * 25 + 900;
}
/* Get the current DVFS level */
unsigned int dvfs_get_level(void)
{
return dvfs_level;
}
/* If DVFS is disabled, set the level explicitly */
void dvfs_set_level(unsigned int level)
{
int oldlevel = disable_irq_save();
unsigned int currlevel =
(CCM_PMCR0 & CCM_PMCR0_DVSUP) >> CCM_PMCR0_DVSUP_POS;
if (!dvfs_running && level < DVFS_NUM_LEVELS && level != currlevel)
set_current_dvfs_level(level);
restore_irq(oldlevel);
}
/* Get the current DPTC working point */
unsigned int dptc_get_wp(void)
{
return dptc_wp;
}
/* If DPTC is not running, set the working point explicitly */
void dptc_set_wp(unsigned int wp)
{
int oldlevel = disable_irq_save();
if (!dptc_running && wp < DPTC_NUM_WP)
dptc_new_wp(wp);
restore_irq(oldlevel);
}
Reference in a new issue View git blame Copy permalink