Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware
History
Rob Purchase 6fd72c750f Introduce sanity check and extra nop to stabilise TCC780x set_cpu_frequency(). Re-enable HAVE_ADJUSTABLE_CPU_FREQ and kill a few warnings by setting HAVE_SW_TONE_CONTROLS. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16904 a1c6a512-1295-4272-9138-f99709370657
2008-03-31 22:43:20 +00:00
..
common Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed. 2008-03-25 02:34:12 +00:00
decompressor
drivers Go back to the ata lock hack for 5g until whatever is going on there is discovered and fixed. 2008-03-28 23:39:28 +00:00
export Introduce sanity check and extra nop to stabilise TCC780x set_cpu_frequency(). Re-enable HAVE_ADJUSTABLE_CPU_FREQ and kill a few warnings by setting HAVE_SW_TONE_CONTROLS. 2008-03-31 22:43:20 +00:00
include FS#7598 - Dircache support for multivolume targets (by Phil Light). 2008-03-11 19:39:26 +00:00
target Introduce sanity check and extra nop to stabilise TCC780x set_cpu_frequency(). Re-enable HAVE_ADJUSTABLE_CPU_FREQ and kill a few warnings by setting HAVE_SW_TONE_CONTROLS. 2008-03-31 22:43:20 +00:00
test Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). 2008-03-26 01:50:41 +00:00
usbstack Sending an empty data block before sending the FAIL CSW seems to make Windows happier if a device is not present (e.g. an empty sd card slot) (fix proposed by Martin Ritter) 2008-03-22 21:21:37 +00:00
arabjoin.c
arabjoin.h
ata_idle_notify.c It makes more sense for the callback registrar to decide if its a "oneshot" then the callback caller. 2008-03-17 05:22:53 +00:00
backlight.c Revert accidental tree commit. /me needs a smaller enter key... 2008-03-25 19:57:23 +00:00
bidi.c code police, no functional changes 2007-07-30 22:33:31 +00:00
buffer.c
COPYING
debug.c
eeprom_settings.c
enc_base.c
events.c It makes more sense for the callback registrar to decide if its a "oneshot" then the callback caller. 2008-03-17 05:22:53 +00:00
font.c Fix 64 bit simulator warning. 2007-10-02 17:04:56 +00:00
font_cache.c
general.c mpegplayer: Make playback engine fully seekable and frame-accurate and split into logical parts. Be sure to have all current features work. Actual UI for seeking will be added soon. Recommended GOP size is about 15-30 frames depending on target or seeking can be slow with really long GOPs (nature of MPEG video). More refined encoding recommendations for a particular player should be posted soon. 2007-12-29 19:46:35 +00:00
hangul.c
hotswap.c Hotswap code shuffling: Fix yellow. Simplify some target function access. Keep fat lock access from compiling for Ondios - think of a nicer way later. 2008-03-12 11:08:41 +00:00
id3.c Revert my earlier const madness, we'll keep the parameter lists simple. 2008-03-28 12:51:33 +00:00
ifp_usb_serial.c move the ifp7xx usb serial driver files to more specific names, to make the "usb_serial" name available for more general usb class driver use 2008-03-02 18:16:24 +00:00
kernel.c Add a lightweight wakeup object for fast processors. 2008-03-30 04:59:51 +00:00
logf.c implement logf over usb-serial. Needs USB_SERIAL defined in usb_core.h to work, and needs to be enabled in the debug menu. 2008-03-02 20:45:33 +00:00
lru.c
Makefile
mp3_playback.c Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). 2008-03-26 01:50:41 +00:00
mp3data.c
mpeg.c Revert my earlier const madness, we'll keep the parameter lists simple. 2008-03-28 12:51:33 +00:00
panic.c iAudio M3: ADC driver, making buttons and battery voltage reading work. * Disable the multi-colour LED for now to save power. Proper handling will be added later. * Make reboot on button press work on iAudio X5, M5, M3 in panicf(), and on M3 in UIE(). 2008-03-17 00:19:23 +00:00
pcm.c Still on the post-big-commit policing. Correct a function call order. Comment a couple things. 2007-10-07 23:19:09 +00:00
pcm_record.c Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed. 2008-03-25 02:34:12 +00:00
pcm_sampr.c
powermgmt.c m:robe 100 - remove ugly workaround for false initial voltage readings and wait until readings have settled instead 2008-03-11 09:38:12 +00:00
profile.c
README
replaygain.c Remove some debug code. Remove some unnecessary checks. 2007-08-25 10:56:22 +00:00
rolo.c Major cleanup of checkwps - fix all warnings and add a script to build versions for all supported targets (plus some unsupported ones). You now need to run the version of checkwps that matches the device your WPS is for. 2008-03-26 23:35:34 +00:00
rom.lds
scroll_engine.c Add viewport capabilities to all the LCD drivers, and adapt scrolling code. This is the firmware/ part of FS#8385 - the changes to the WPS code still need more work and will be committed at a later date. NOTE: There are no user-visible changes with this commit - just the infrastructure. 2008-01-07 20:34:11 +00:00
sound.c Introduce sanity check and extra nop to stabilise TCC780x set_cpu_frequency(). Re-enable HAVE_ADJUSTABLE_CPU_FREQ and kill a few warnings by setting HAVE_SW_TONE_CONTROLS. 2008-03-31 22:43:20 +00:00
SOURCES Fix red and clean up meg-fx firmware sources. Remove an unused file. 2008-03-30 06:06:43 +00:00
system.c Gigabeat S: Interrupt enabled bootloader. Miscellaneous integration changes. 2008-02-08 02:20:05 +00:00
thread.c Go back to the ata lock hack for 5g until whatever is going on there is discovered and fixed. 2008-03-28 23:39:28 +00:00
timer.c Fix empty commit: Add grayscale support for ARM in vertical packing format. 2007-09-22 23:37:58 +00:00
tuner.c
usb.c Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). 2008-03-26 01:50:41 +00:00

README 

See docs/README