rockbox

Michael Sevakis 9ba80c9641 Get device-specific code out of init_threads and add core_thread_init to be implemented for multicore devices. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17000 a1c6a512-1295-4272-9138-f99709370657	2008-04-06 22:08:36 +00:00
..
common	Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.	2008-03-25 02:34:12 +00:00
decompressor
drivers	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
export	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
include	FS#7598 - Dircache support for multivolume targets (by Phil Light).	2008-03-11 19:39:26 +00:00
target	e200: Get the UNCACHED_ADDR macro and phys_fb_address use out of the lcd driver.	2008-04-06 05:08:39 +00:00
test	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
usbstack	Clean up the way empty transfers are sent in error cases.	2008-04-01 20:36:51 +00:00
arabjoin.c
arabjoin.h
ata_idle_notify.c	It makes more sense for the callback registrar to decide if its a "oneshot" then the callback caller.	2008-03-17 05:22:53 +00:00
backlight.c	1st/2nd Gen: Make backlight inversion adaption in the greyscale library work again. is_backlight_on() can now be called from COP.	2008-04-06 15:15:44 +00:00
bidi.c
buffer.c
COPYING
debug.c
eeprom_settings.c
enc_base.c
events.c	It makes more sense for the callback registrar to decide if its a "oneshot" then the callback caller.	2008-03-17 05:22:53 +00:00
font.c	Fix 64 bit simulator warning.	2007-10-02 17:04:56 +00:00
font_cache.c
general.c	mpegplayer: Make playback engine fully seekable and frame-accurate and split into logical parts. Be sure to have all current features work. Actual UI for seeking will be added soon. Recommended GOP size is about 15-30 frames depending on target or seeking can be slow with really long GOPs (nature of MPEG video). More refined encoding recommendations for a particular player should be posted soon.	2007-12-29 19:46:35 +00:00
hangul.c
hotswap.c	Hotswap code shuffling: Fix yellow. Simplify some target function access. Keep fat lock access from compiling for Ondios - think of a nicer way later.	2008-03-12 11:08:41 +00:00
id3.c	Revert... stupid svn doesn't complain when passing -m twice :(	2008-04-02 22:45:23 +00:00
ifp_usb_serial.c	move the ifp7xx usb serial driver files to more specific names, to make the "usb_serial" name available for more general usb class driver use	2008-03-02 18:16:24 +00:00
kernel.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
logf.c	implement logf over usb-serial. Needs USB_SERIAL defined in usb_core.h to work, and needs to be enabled in the debug menu.	2008-03-02 20:45:33 +00:00
lru.c
Makefile
mp3_playback.c	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
mp3data.c
mpeg.c	Revert my earlier const madness, we'll keep the parameter lists simple.	2008-03-28 12:51:33 +00:00
panic.c	iAudio M3: ADC driver, making buttons and battery voltage reading work. * Disable the multi-colour LED for now to save power. Proper handling will be added later. * Make reboot on button press work on iAudio X5, M5, M3 in panicf(), and on M3 in UIE().	2008-03-17 00:19:23 +00:00
pcm.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
pcm_record.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
pcm_sampr.c
powermgmt.c	m:robe 100 - remove ugly workaround for false initial voltage readings and wait until readings have settled instead	2008-03-11 09:38:12 +00:00
profile.c
README
replaygain.c
rolo.c	Major cleanup of checkwps - fix all warnings and add a script to build versions for all supported targets (plus some unsupported ones). You now need to run the version of checkwps that matches the device your WPS is for.	2008-03-26 23:35:34 +00:00
rom.lds
scroll_engine.c	Add viewport capabilities to all the LCD drivers, and adapt scrolling code. This is the firmware/ part of FS#8385 - the changes to the WPS code still need more work and will be committed at a later date. NOTE: There are no user-visible changes with this commit - just the infrastructure.	2008-01-07 20:34:11 +00:00
sound.c	Introduce sanity check and extra nop to stabilise TCC780x set_cpu_frequency(). Re-enable HAVE_ADJUSTABLE_CPU_FREQ and kill a few warnings by setting HAVE_SW_TONE_CONTROLS.	2008-03-31 22:43:20 +00:00
SOURCES	D2: Adjustable backlight brightness (sometimes fails when boosted, suggests I2C timing needs adjustment). Tweak lcd_enable() to behave more like other targets.	2008-04-04 20:55:58 +00:00
system.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
thread.c	Get device-specific code out of init_threads and add core_thread_init to be implemented for multicore devices.	2008-04-06 22:08:36 +00:00
timer.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
tuner.c
usb.c	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00