rockbox/firmware/export/config/iaudio7.h
Rafaël Carré b5e879e837 TARGET_TREE is not needed anymore
spotted by jhMikeS

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31597 a1c6a512-1295-4272-9138-f99709370657
2012-01-07 17:14:40 +00:00

165 lines
4.3 KiB
C

/*
* This config file is for the Iaudio7 series
*/
/* For Rolo and boot loader */
#define MODEL_NUMBER 32
#define MODEL_NAME "Cowon iAudio7"
/* define this if you have recording possibility */
#define HAVE_RECORDING
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
/* FM Tuner */
#define CONFIG_TUNER LV24020LP
#define HAVE_TUNER_PWR_CTRL
/* Define this for FM radio input available */
#define HAVE_FMRADIO_IN
/* define hardware samples rate caps mask */
#define HW_SAMPR_CAPS (/*SAMPR_CAP_88 | */SAMPR_CAP_44/* | SAMPR_CAP_22 | SAMPR_CAP_11*/)
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS (SAMPR_CAP_44/* | SAMPR_CAP_22 | SAMPR_CAP_11*/)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you can flip your LCD */
//#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
//#define HAVE_LCD_INVERT
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you have LCD enable function */
#define HAVE_LCD_ENABLE
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
#define HAVE_FAT16SUPPORT
#if 0 && !defined(SIMULATOR) /* Enable for USB driver test */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x0e21
#define USB_PRODUCT_ID 0x0750
#endif
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
#define CONFIG_STORAGE STORAGE_NAND
#define CONFIG_NAND NAND_TCC
/* LCD dimensions */
#define LCD_WIDTH 160
#define LCD_HEIGHT 128
/* 16bits for now... */
#define LCD_DEPTH 16 /* 262144 colours */
#define LCD_PIXELFORMAT RGB565 /*rgb565*/
/*#define LCD_PIXELFORMAT VERTICAL_PACKING*/
/* define this to indicate your device's keypad */
#define CONFIG_KEYPAD IAUDIO67_PAD
/* #define HAVE_BUTTON_DATA */
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_PCF50606
/* define this if you have RTC RAM available for settings */
//#define HAVE_RTC_RAM
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* Reduce Tremor's ICODE usage */
#define ICODE_ATTR_TREMOR_NOT_MDCT
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
#define AB_REPEAT_ENABLE
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* The iaudio7 uses built-in WM8731 codec */
#define HAVE_WM8731
/* Codec is slave on serial bus */
#define CODEC_SLAVE
/* WM8731 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define CONFIG_I2C I2C_TCC77X
#define BATTERY_CAPACITY_DEFAULT 540 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 540 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 540 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
#define CONFIG_CHARGING CHARGING_SIMPLE
/* Define this if you have a TCC770 */
#define CONFIG_CPU TCC770
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
/* Define this to the CPU frequency */
#define CPU_FREQ 120000000
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
#define CONFIG_LCD LCD_IAUDIO67
#define BOOTFILE_EXT "iaudio"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#ifdef BOOTLOADER
#define TCCBOOT
#endif
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
/* Define this if a programmable hotkey is mapped */
//#define HAVE_HOTKEY