134 lines
4.2 KiB
C
134 lines
4.2 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id: power-nano2g.c 28190 2010-10-01 18:09:10Z Buschel $
|
|
*
|
|
* Copyright © 2009 Bertrik Sikken
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include <stdbool.h>
|
|
#include "config.h"
|
|
#include "inttypes.h"
|
|
#include "s5l8702.h"
|
|
#include "power.h"
|
|
#include "panic.h"
|
|
#include "pmu-target.h"
|
|
#include "usb_core.h" /* for usb_charging_maxcurrent_change */
|
|
|
|
static int idepowered;
|
|
|
|
void power_off(void)
|
|
{
|
|
/* USB inserted or EXTON1 */
|
|
pmu_set_wake_condition(
|
|
PCF5063X_OOCWAKE_EXTON2 | PCF5063X_OOCWAKE_EXTON1);
|
|
pmu_enter_standby();
|
|
|
|
while(1);
|
|
}
|
|
|
|
void power_init(void)
|
|
{
|
|
pmu_init();
|
|
|
|
idepowered = false;
|
|
|
|
/* DOWN1CTL: CPU DVM step time = 30us (default: no DVM) */
|
|
pmu_write(0x20, 2);
|
|
|
|
/* USB power configuration:
|
|
*
|
|
* GPIO C0 is probably related to the LTC4066's CLPROG
|
|
* pin (see datasheet). Setting it high allows to double
|
|
* the maximum current selected by HPWR:
|
|
*
|
|
* GPIO B6 GPIO C0 USB current
|
|
* HPWR CLPROG ??? limit (mA)
|
|
* ------- ---------- -----------
|
|
* 0 0 100
|
|
* 1 0 500
|
|
* 0 1 200
|
|
* 1 1 1000 ??? (max.seen ~750mA)
|
|
*
|
|
* USB current limit includes battery charge and device
|
|
* consumption. Battery charge has it's own limit at
|
|
* 330~340 mA (configured using RPROG).
|
|
*
|
|
* Setting either of GPIO C1 or GPIO C2 disables battery
|
|
* charge, power needed for device consumptiom is drained
|
|
* from USB or AC adaptor when present. If external power
|
|
* is not present or it is insufficient or limited,
|
|
* additional required power is drained from battery.
|
|
*/
|
|
PCONB = (PCONB & 0x000000ff)
|
|
| (0xe << 8) /* route D+ to ADC2: off */
|
|
| (0xe << 12) /* route D- to ADC2: off */
|
|
| (0x0 << 16) /* USB related input, POL pin ??? */
|
|
| (0x0 << 20) /* USB related input, !CHRG pin ??? */
|
|
| (0xe << 24) /* HPWR: 100mA */
|
|
| (0xe << 28); /* USB suspend: off */
|
|
|
|
PCONC = (PCONC & 0xffff0000)
|
|
| (0xe << 0) /* double HPWR limit: off */
|
|
| (0xe << 4) /* disable battery charge: off */
|
|
| (0xe << 8) /* disable battery charge: off */
|
|
| (0x0 << 12); /* USB inserted/not inserted */
|
|
}
|
|
|
|
void ide_power_enable(bool on)
|
|
{
|
|
idepowered = on;
|
|
pmu_hdd_power(on);
|
|
}
|
|
|
|
bool ide_powered()
|
|
{
|
|
return idepowered;
|
|
}
|
|
|
|
#if CONFIG_CHARGING
|
|
|
|
#ifdef HAVE_USB_CHARGING_ENABLE
|
|
void usb_charging_maxcurrent_change(int maxcurrent)
|
|
{
|
|
bool suspend_charging = (maxcurrent < 100);
|
|
bool fast_charging = (maxcurrent >= 500);
|
|
|
|
/* This GPIO is connected to the LTC4066's SUSP pin */
|
|
/* Setting it high prevents any power being drawn over USB */
|
|
/* which supports USB suspend */
|
|
GPIOCMD = 0xb070e | (suspend_charging ? 1 : 0);
|
|
|
|
/* This GPIO is connected to the LTC4066's HPWR pin */
|
|
/* Setting it low limits current to 100mA, setting it high allows 500mA */
|
|
GPIOCMD = 0xb060e | (fast_charging ? 1 : 0);
|
|
}
|
|
#endif
|
|
|
|
unsigned int power_input_status(void)
|
|
{
|
|
unsigned int status = POWER_INPUT_NONE;
|
|
if (usb_detect() == USB_INSERTED)
|
|
status |= POWER_INPUT_USB_CHARGER;
|
|
if (pmu_firewire_present())
|
|
status |= POWER_INPUT_MAIN_CHARGER;
|
|
return status;
|
|
}
|
|
|
|
bool charging_state(void)
|
|
{
|
|
return (PDAT(11) & 0x10) ? 0 : 1;
|
|
}
|
|
#endif /* CONFIG_CHARGING */
|