..
sansa-c200v2
Sansa c200v2: update DBOP button reading mechanism, this enables readout of the volume buttons, rec and hold button.
2009-09-05 18:56:59 +00:00
sansa-clip
Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled
2009-08-15 15:02:51 +00:00
sansa-e200v2
Move the FIFO emptying up, as having it after lcd_write_single_data16() causes problems with uneven transfers (I'm not sure why).
2009-09-01 02:06:37 +00:00
sansa-fuze
Make the Fuze usable again by inserting a few delays in the lcd functions, core rockbox should be fine now. NOTE: *After exiting* plugins (e.g. doom, plasma, pictureflow) which do heavy lcd updates, the Fuze still fails (backlight goes off) -- I have no idea how that happens yet, Unless I find a fix for that within the next few days, I'm probably going to revert one/both of the lcd speedup commits.
2009-09-05 03:50:04 +00:00
sansa-m200v4
Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled
2009-08-15 15:02:51 +00:00
adc-target.h
Sansa AMS: use the AS3514 ADC driver
2008-11-10 20:55:56 +00:00
app.lds
FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
2009-06-08 23:05:33 +00:00
ascodec-as3525.c
Sansa AMS : don't use the SHAREDBSS_ATTR since we don't have a coprocessor
2009-06-02 22:45:02 +00:00
ascodec-target.h
FS#10344 - AMSSansa Dynamically adjust core voltage to extend playtime.
2009-06-30 17:56:21 +00:00
ata_sd_as3525.c
Make sd_present() and mmc_present() look only at the actual presence of a card, not at initialisation state
2009-07-20 13:47:21 +00:00
audio-as3525.c
FS#9611 - Sansa Clip radio code. Commit final part which enables the LINE2 input that carries the analog radio signal on ams sansas.
2009-02-05 19:57:18 +00:00
backlight-e200v2-fuze.c
FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2)
2009-06-18 22:33:02 +00:00
boot.lds
FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
2009-06-08 23:05:33 +00:00
button-e200v2-fuze.c
Higher the button delay on the fuze a bit more, the wrong hold button reads aren't happening anymore apparently even for plugins with heavy lcd updates.
2009-09-07 23:48:51 +00:00
clock-target.h
AMSSansa: Add AS3525_DRAM_FREQ as a configurable frequency. Attempts to use PCLK != DRAM still fail but a method is now in place. Default scheme remains 248/62/62.
2009-05-29 20:19:35 +00:00
debug-as3525.c
AMS Sansa: Adjust View HW info page to display SD and uSD MCICLK freqs instead
2009-09-12 20:50:11 +00:00
debug-target.h
Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver
2009-02-17 02:36:48 +00:00
dma-pl081.c
Patch by Rafaël Carré - Sansa AMS: Fix a few mistakes in DMA code
2009-04-07 17:08:26 +00:00
dma-target.h
Sansa AMS : use SD controller status to notify end of data transfer
2009-01-08 08:27:42 +00:00
fmradio-i2c-as3525.c
Fix delays in generic i2c driver, reduce delays in ams sansa fmradio i2c driver (tested on m200v4, clip, e200v2, fuze).
2009-06-20 21:45:04 +00:00
i2s-as3525.c
kernel-as3525.c
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
2009-06-29 14:30:12 +00:00
lcd-as-e200v2-fuze.S
ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.
2009-07-11 23:43:44 +00:00
pcm-as3525.c
FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
2009-06-08 23:05:33 +00:00
power-as3525.c
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
2008-12-27 19:18:50 +00:00
powermgmt-as3525.c
Implement a basic uncalibrated battery reading for all as3525 targets with a lithium battery.
2008-11-23 15:00:44 +00:00
powermgmt-target.h
Enable charging on the Sansa Fuze (charging/discharging curves are still uncalibrated)
2009-06-20 14:29:21 +00:00
system-as3525.c
Sansa AMS: identify interrupts with no source set
2009-08-11 13:20:55 +00:00
system-target.h
ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.
2009-07-05 01:17:25 +00:00
timer-as3525.c
Remove the TIMER_* macros and declare target-specific functions in timer.h
2009-06-29 14:29:57 +00:00
usb-as3525.c
Fix #includes in usb-as3525.c
2009-04-12 19:08:26 +00:00
usb-drv-as3525.c
Samsa AMS: start of an USB driver (nothing working atm)
2009-07-06 13:54:51 +00:00
589e1f0072