58825f6e73
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11502 a1c6a512-1295-4272-9138-f99709370657
127 lines
3.9 KiB
C
127 lines
3.9 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2006 by Linus Nielsen Feltzing
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include "system.h"
|
|
#include "kernel.h"
|
|
#include "pcf50606.h"
|
|
#include "button-target.h"
|
|
#include "powermgmt.h"
|
|
|
|
/* These voltages were determined by measuring the output of the PCF50606
|
|
on a running X5, and verified by disassembling the original firmware */
|
|
static void set_voltages(void)
|
|
{
|
|
static const unsigned char buf[4] =
|
|
{
|
|
0xf4, /* IOREGC = 2.9V, ON in all states */
|
|
0xf0, /* D1REGC = 2.5V, ON in all states */
|
|
0xf6, /* D2REGC = 3.1V, ON in all states */
|
|
0xf4, /* D3REGC = 2.9V, ON in all states */
|
|
};
|
|
|
|
pcf50606_write_multiple(0x23, buf, 4);
|
|
}
|
|
|
|
static void init_pmu_interrupts(void)
|
|
{
|
|
/* inital data is interrupt masks */
|
|
unsigned char data[3] =
|
|
{
|
|
~0x04, /* unmask ONKEY1S */
|
|
~0x00,
|
|
~0x06, /* unmask ACDREM, ACDINS */
|
|
};
|
|
|
|
/* make sure GPI0 interrupt is off before unmasking anything */
|
|
and_l(~0xf, &INTPRI5); /* INT32 - Priority 0 (Off) */
|
|
|
|
/* unmask the PMU interrupts we want to service */
|
|
pcf50606_write_multiple(0x05, data, 3);
|
|
/* clear INT1-3 as these are left set after standby */
|
|
pcf50606_read_multiple(0x02, data, 3);
|
|
|
|
/* Set to read pcf50606 INT but keep GPI0 off until init completes */
|
|
and_l(~0x00000001, &GPIO_ENABLE);
|
|
or_l(0x00000001, &GPIO_FUNCTION);
|
|
or_l(0x00000100, &GPIO_INT_EN); /* GPI0 H-L */
|
|
}
|
|
|
|
static inline void enable_pmu_interrupts(void)
|
|
{
|
|
/* clear pending GPI0 interrupts first or it may miss the first
|
|
H-L transition */
|
|
or_l(0x00000100, &GPIO_INT_CLEAR);
|
|
or_l(0x3, &INTPRI5); /* INT32 - Priority 3 */
|
|
}
|
|
|
|
void pcf50606_init(void)
|
|
{
|
|
pcf50606_i2c_init();
|
|
|
|
/* initialize pmu interrupts but don't service them yet */
|
|
init_pmu_interrupts();
|
|
set_voltages();
|
|
|
|
pcf50606_write(0x39, 0x00); /* GPOOD0 = green led OFF */
|
|
pcf50606_write(0x3a, 0x00); /* GPOOD1 = red led OFF */
|
|
|
|
/* Accessory detect */
|
|
pcf50606_write(0x33, 0x8e); /* ACDAPE=1, THRSHLD=2.40V */
|
|
|
|
/* allow GPI0 interrupts from PMU now */
|
|
enable_pmu_interrupts();
|
|
}
|
|
|
|
void pcf50606_reset_timeout(void)
|
|
{
|
|
int level = set_irq_level(HIGHEST_IRQ_LEVEL);
|
|
pcf50606_write(0x08, pcf50606_read(0x08) | 0x02); /* OOCC1 - TOTRST=1 */
|
|
set_irq_level(level);
|
|
}
|
|
|
|
/* Handles interrupts generated by the pcf50606 */
|
|
void GPI0(void) __attribute__ ((interrupt_handler, section(".text")));
|
|
void GPI0(void)
|
|
{
|
|
unsigned char data[3]; /* 0 = INT1, 1 = INT2, 2 = INT3 */
|
|
|
|
/* Clear pending GPI0 interrupts */
|
|
or_l(0x00000100, &GPIO_INT_CLEAR);
|
|
|
|
/* clear pending interrupts from pcf50606 */
|
|
pcf50606_read_multiple(0x02, data, 3);
|
|
|
|
if (data[0] & 0x04)
|
|
{
|
|
/* ONKEY1S */
|
|
if (GPIO_READ & 0x02000000)
|
|
sys_poweroff(); /* main ONKEY */
|
|
else
|
|
pcf50606_reset_timeout(); /* remote ONKEY */
|
|
}
|
|
|
|
if (data[2] & 0x06)
|
|
{
|
|
/* ACDINS/ACDREM */
|
|
/* Check if main buttons should be actually be scanned or not
|
|
- bias towards "yes" out of paranoia. */
|
|
button_enable_scan((data[2] & 0x02) != 0 ||
|
|
(pcf50606_read(0x33) & 0x01) != 0);
|
|
}
|
|
}
|