rockbox/firmware/target/arm/tms320dm320/mrobe-500/powermgmt-mr500.c

74 lines
2.2 KiB
C
Executable file

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Karl Kurbjun
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "adc.h"
#include "powermgmt.h"
#include "tsc2100.h"
#include "kernel.h"
static unsigned short current_voltage = 3910;
const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
{
0
};
const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
{
0
};
/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
{
{ 100, 300, 400, 500, 600, 700, 800, 900, 1000, 1200, 1320 },
};
/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
const unsigned short percent_to_volt_charge[11] =
{
100, 300, 400, 500, 600, 700, 800, 900, 1000, 1200, 1320,
};
void read_battery_inputs(void)
{
short dummy1, dummy2;
tsc2100_read_volt(&current_voltage, &dummy1, &dummy2);
/* Set the TSC2100 back to read touches */
tsc2100_set_mode(0x01);
}
/* Returns battery voltage from ADC [millivolts] */
unsigned int battery_adc_voltage(void)
{
static unsigned last_tick = 0;
if (TIME_BEFORE(last_tick+2*HZ, current_tick))
{
/* Set the TSC2100 to read voltages */
tsc2100_set_mode(0x0B);
last_tick = current_tick;
}
return current_voltage;
}