Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/sh/archos/mascodec-archos.c
Torne Wuff 569285794b Bulk convert all DOS line endings to UNIX. 
For the git migration we want a nice clean repository with UNIX line
endings. git does not use svn:eol-style, we just need the file contents to be
sane.

Sorry everybody. I know this messes up blame.

Scumbag *NIX developer says migrating to git will make line ending issues go
away; commits giant change to svn which changes line endings anyway. :)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30924 a1c6a512-1295-4272-9138-f99709370657
2011-11-06 22:44:25 +00:00

485 lines
10 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Linus Nielsen Feltzing
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "stdbool.h"
#include "config.h"
#include "sh7034.h"
#include "i2c.h"
#include "debug.h"
#include "mas35xx.h"
#include "kernel.h"
#include "system.h"
#include "hwcompat.h"
static int mas_devread(unsigned long *dest, int len);
int mas_default_read(unsigned short *buf)
{
unsigned char *dest = (unsigned char *)buf;
int ret = 0;
i2c_begin();
i2c_start();
i2c_outb(MAS_DEV_WRITE);
if (i2c_getack()) {
i2c_outb(MAS_DATA_READ);
if (i2c_getack()) {
i2c_start();
i2c_outb(MAS_DEV_READ);
if (i2c_getack()) {
dest[0] = i2c_inb(0);
dest[1] = i2c_inb(1);
}
else
ret = -3;
}
else
ret = -2;
}
else
ret = -1;
i2c_stop();
i2c_end();
return ret;
}
int mas_run(unsigned short address)
{
int ret = 0;
unsigned char buf[3];
i2c_begin();
buf[0] = MAS_DATA_WRITE;
buf[1] = address >> 8;
buf[2] = address & 0xff;
/* send run command */
if (i2c_write(MAS_DEV_WRITE,buf,3))
{
ret = -1;
}
i2c_end();
return ret;
}
/* note: 'len' is number of 32-bit words, not number of bytes! */
int mas_readmem(int bank, int addr, unsigned long* dest, int len)
{
int ret = 0;
unsigned char buf[7];
i2c_begin();
buf[0] = MAS_DATA_WRITE;
buf[1] = bank?MAS_CMD_READ_D1_MEM:MAS_CMD_READ_D0_MEM;
buf[2] = 0x00;
buf[3] = (len & 0xff00) >> 8;
buf[4] = len & 0xff;
buf[5] = (addr & 0xff00) >> 8;
buf[6] = addr & 0xff;
/* send read command */
if (i2c_write(MAS_DEV_WRITE,buf,7))
{
ret = -1;
}
ret = mas_devread(dest, len);
i2c_end();
return ret;
}
/* note: 'len' is number of 32-bit words, not number of bytes! */
int mas_writemem(int bank, int addr, const unsigned long* src, int len)
{
int ret = 0;
int i, j;
unsigned char buf[60];
const unsigned char* ptr = (const unsigned char*)src;
i2c_begin();
i=0;
buf[i++] = MAS_DATA_WRITE;
buf[i++] = bank?MAS_CMD_WRITE_D1_MEM:MAS_CMD_WRITE_D0_MEM;
buf[i++] = 0x00;
buf[i++] = (len & 0xff00) >> 8;
buf[i++] = len & 0xff;
buf[i++] = (addr & 0xff00) >> 8;
buf[i++] = addr & 0xff;
j = 0;
while(len--) {
#if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F)
buf[i++] = 0;
buf[i++] = ptr[j+1];
buf[i++] = ptr[j+2];
buf[i++] = ptr[j+3];
#else
buf[i++] = ptr[j+2];
buf[i++] = ptr[j+3];
buf[i++] = 0;
buf[i++] = ptr[j+1];
#endif
j += 4;
}
/* send write command */
if (i2c_write(MAS_DEV_WRITE,buf,i))
{
ret = -1;
}
i2c_end();
return ret;
}
int mas_readreg(int reg)
{
int ret = 0;
unsigned char buf[16];
unsigned long value;
i2c_begin();
buf[0] = MAS_DATA_WRITE;
buf[1] = MAS_CMD_READ_REG | (reg >> 4);
buf[2] = (reg & 0x0f) << 4;
/* send read command */
if (i2c_write(MAS_DEV_WRITE,buf,3))
{
ret = -1;
}
else
{
if(mas_devread(&value, 1))
{
ret = -2;
}
else
{
ret = value;
}
}
i2c_end();
return ret;
}
int mas_writereg(int reg, unsigned int val)
{
int ret = 0;
unsigned char buf[5];
i2c_begin();
buf[0] = MAS_DATA_WRITE;
buf[1] = MAS_CMD_WRITE_REG | (reg >> 4);
#if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F)
buf[2] = ((reg & 0x0f) << 4) | (val >> 16 & 0x0f);
buf[3] = (val >> 8) & 0xff;
buf[4] = val & 0xff;
#else
buf[2] = ((reg & 0x0f) << 4) | (val & 0x0f);
buf[3] = (val >> 12) & 0xff;
buf[4] = (val >> 4) & 0xff;
#endif
/* send write command */
if (i2c_write(MAS_DEV_WRITE,buf,5))
{
ret = -1;
}
i2c_end();
return ret;
}
/* note: 'len' is number of 32-bit words, not number of bytes! */
static int mas_devread(unsigned long *dest, int len)
{
int ret = 0;
unsigned char* ptr = (unsigned char*)dest;
int i;
/* handle read-back */
/* Remember, the MAS values are only 20 bits, so we set
the upper 12 bits to 0 */
i2c_start();
i2c_outb(MAS_DEV_WRITE);
if (i2c_getack()) {
i2c_outb(MAS_DATA_READ);
if (i2c_getack()) {
i2c_start();
i2c_outb(MAS_DEV_READ);
if (i2c_getack()) {
for (i=0;len;i++) {
len--;
#if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F)
i2c_inb(0); /* Dummy read */
ptr[i*4+0] = 0;
ptr[i*4+1] = i2c_inb(0) & 0x0f;
ptr[i*4+2] = i2c_inb(0);
if(len)
ptr[i*4+3] = i2c_inb(0);
else
ptr[i*4+3] = i2c_inb(1); /* NAK the last byte */
#else
ptr[i*4+2] = i2c_inb(0);
ptr[i*4+3] = i2c_inb(0);
ptr[i*4+0] = i2c_inb(0);
if(len)
ptr[i*4+1] = i2c_inb(0);
else
ptr[i*4+1] = i2c_inb(1); /* NAK the last byte */
#endif
}
}
else
ret = -3;
}
else
ret = -2;
}
else
ret = -1;
i2c_stop();
return ret;
}
void mas_reset(void)
{
or_b(0x01, &PAIORH);
#if CONFIG_CODEC == MAS3507D
/* PB5 is "MAS enable". make it GPIO output and high */
PBCR2 &= ~0x0c00;
or_b(0x20, &PBIORL);
or_b(0x20, &PBDRL);
and_b(~0x01, &PADRH);
sleep(HZ/100);
or_b(0x01, &PADRH);
sleep(HZ/5);
#elif (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F)
if (HW_MASK & ATA_ADDRESS_200)
{
and_b(~0x01, &PADRH);
sleep(HZ/100);
or_b(0x01, &PADRH);
sleep(HZ/5);
}
else
{
/* Older recorder models don't invert the POR signal */
or_b(0x01, &PADRH);
sleep(HZ/100);
and_b(~0x01, &PADRH);
sleep(HZ/5);
}
#endif
}
#if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F)
int mas_direct_config_read(unsigned char reg)
{
int ret = 0;
unsigned char tmp[2];
i2c_begin();
i2c_start();
i2c_outb(MAS_DEV_WRITE);
if (i2c_getack()) {
i2c_outb(reg);
if (i2c_getack()) {
i2c_start();
i2c_outb(MAS_DEV_READ);
if (i2c_getack()) {
tmp[0] = i2c_inb(0);
tmp[1] = i2c_inb(1); /* NAK the last byte */
ret = (tmp[0] << 8) | tmp[1];
}
else
ret = -3;
}
else
ret = -2;
}
else
ret = -1;
i2c_stop();
i2c_end();
return ret;
}
int mas_direct_config_write(unsigned char reg, unsigned int val)
{
int ret = 0;
unsigned char buf[3];
i2c_begin();
buf[0] = reg;
buf[1] = (val >> 8) & 0xff;
buf[2] = val & 0xff;
/* send write command */
if (i2c_write(MAS_DEV_WRITE,buf,3))
{
ret = -1;
}
i2c_end();
return ret;
}
int mas_codec_writereg(int reg, unsigned int val)
{
int ret = 0;
unsigned char buf[5];
i2c_begin();
buf[0] = MAS_CODEC_WRITE;
buf[1] = (reg >> 8) & 0xff;
buf[2] = reg & 0xff;
buf[3] = (val >> 8) & 0xff;
buf[4] = val & 0xff;
/* send write command */
if (i2c_write(MAS_DEV_WRITE,buf,5))
{
ret = -1;
}
i2c_end();
return ret;
}
int mas_codec_readreg(int reg)
{
int ret = 0;
unsigned char buf[16];
unsigned char tmp[2];
i2c_begin();
buf[0] = MAS_CODEC_WRITE;
buf[1] = (reg >> 8) & 0xff;
buf[2] = reg & 0xff;
/* send read command */
if (i2c_write(MAS_DEV_WRITE,buf,3))
{
ret = -1;
}
else
{
i2c_start();
i2c_outb(MAS_DEV_WRITE);
if (i2c_getack()) {
i2c_outb(MAS_CODEC_READ);
if (i2c_getack()) {
i2c_start();
i2c_outb(MAS_DEV_READ);
if (i2c_getack()) {
tmp[0] = i2c_inb(0);
tmp[1] = i2c_inb(1); /* NAK the last byte */
ret = (tmp[0] << 8) | tmp[1];
}
else
ret = -4;
}
else
ret = -3;
}
else
ret = -2;
i2c_stop();
}
i2c_end();
return ret;
}
unsigned long mas_readver(void)
{
int ret = 0;
unsigned char buf[16];
unsigned long value;
i2c_begin();
buf[0] = MAS_DATA_WRITE;
buf[1] = MAS_CMD_READ_IC_VER;
buf[2] = 0;
/* send read command */
if (i2c_write(MAS_DEV_WRITE,buf,3))
{
ret = -1;
}
else
{
if(mas_devread(&value, 1))
{
ret = -2;
}
else
{
ret = value;
}
}
i2c_end();
return ret;
}
#endif
#if CONFIG_TUNER & S1A0903X01
static int pllfreq;
void mas_store_pllfreq(int freq)
{
pllfreq = freq;
}
int mas_get_pllfreq(void)
{
return pllfreq;
}
#endif
Reference in a new issue View git blame Copy permalink