..
archos /av300
as3525
Bulk convert all DOS line endings to UNIX.
2011-11-06 22:44:25 +00:00
at91sam
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
imx31
Gigabeat S: Maintain power thread at realtime priority at all times so it may always service the watchdog on time regardless of playback priority.
2011-10-30 14:32:42 +00:00
imx233
fuze+: use macro and add a few static
2011-11-02 17:48:04 +00:00
ipod
Make local functions and variables static where possible
2011-11-03 23:32:49 +00:00
iriver
Convert PortalPlayer iRivers to use USB-mode enabled bootloader. The H10 5/6GB already has a pre-boot USB mode (so it's a little redundant there) but building them the same way is simpler.
2011-01-17 06:50:27 +00:00
olympus
Merge functionality of wakeups and semaphores-- fewer APIs and object types. semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.
2011-03-02 08:49:38 +00:00
pbell
Get the last warning for vibe 500 bootloader.
2011-01-15 09:11:38 +00:00
philips
HDD6330: improve the behavior of the lcd during shutdown.
2011-09-20 10:32:58 +00:00
pnx0101
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
rk27xx
Added HiFiMAN HM-801 target. FS#12355. This also renames tda1543.{ch} used by HM-60x to dummy_codec.{ch} as it works for PCM1704 used by HM-801.
2011-11-03 11:53:02 +00:00
s3c2440
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
s5l8700
Bulk convert all DOS line endings to UNIX.
2011-11-06 22:44:25 +00:00
s5l8702
Bulk convert all DOS line endings to UNIX.
2011-11-06 22:44:25 +00:00
samsung
sandisk
Rework c200wipe to use proper partitioning and formatting code, which makes the code size-independent.
2011-09-02 21:34:28 +00:00
tatung
tcc77x
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
tcc780x
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
tms320dm320
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
adc-as3514.c
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
ata-as-arm.S
ata-nand-telechips.c
GSoC/Buflib: Add buflib memory alocator to the core.
2011-08-30 14:01:33 +00:00
ata-pp5002.c
ata-pp5020.c
Fix or at least significantly improve FS#11830. With introduction of ATA DMA for PP502x a special treatment of the IDE0_CFG register for the iPod nano (see FS#7510) was lost.
2011-01-21 23:32:57 +00:00
ata-sd-pp.c
All kernel objects in code shared amongs targets (core, plugins, codecs) should be declared SHAREDBSS_ATTR as any core could potentially touch them even though they seem only to involve threads on one core. The exception is target code for particular CPUs where proper allocation is fixed. playlist.c was a little odd too-- use one mutex for the current playlist and a separate one for created playlists (still pondering the necessity of more than one).
2011-02-14 11:27:45 +00:00
ata-target.h
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
2011-01-15 08:19:30 +00:00
audio-pp.c
bits-armv4.S
Add ARMv4 16-bit(set, mod, clr) operations used on DM320.
2011-02-06 19:43:45 +00:00
bits-armv6.S
boot-pp502x-bl-usb.lds
e200v1 seems to be ok using USB-enabled bootloader. Also, include the bootloader USB .lds into the boot.lds instead of pasting into every one to keep things sane for now-- commented upon inside.
2011-01-16 01:40:15 +00:00
crt0-pp-bl.S
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
crt0-pp.S
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
crt0-pp502x-bl-usb.S
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
crt0.S
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
debug-pp.c
ipod nano 1g: enable readout of battery current through ADC channel 4066_ISTAT
2011-07-24 17:32:50 +00:00
debug-target.h
Move dbg_hw_info() into target tree. FS#11735 by me
2011-06-05 10:26:06 +00:00
ffs-arm.S
i2c-pp.c
i2c-telechips.c
i2s-pp.c
kernel-pp.c
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
2011-01-15 08:19:30 +00:00
lcd-as-memframe.S
lcd-c200_c200v2.c
lcd-ssd1815.c
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.h
mmu-arm.S
imx233/fuze+: prepare target to enable MMU
2011-07-23 11:45:18 +00:00
mmu-armv6.S
pcm-mixer-armv4.c
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
2011-06-29 06:37:04 +00:00
pcm-mixer-armv5.c
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
2011-06-29 06:37:04 +00:00
pcm-mixer-armv6.c
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
2011-06-29 06:37:04 +00:00
pcm-pp.c
Oops. "void void" doesn't work in C :p.
2011-09-01 12:20:52 +00:00
pcm-telechips.c
Shuffle some functions around so that interfacing with playback.c in particular isn't required. Though playback does finish the audio init, pcm doesn't care who does it.
2011-09-01 12:15:43 +00:00
powermgmt-ascodec.c
Sansa AMSv2: initialise PMU (power management unit), inspired by how the OF does it
2011-09-18 15:33:19 +00:00
sd-pp-target.h
support-arm.S
system-arm.c
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
system-arm.h
Merge functionality of wakeups and semaphores-- fewer APIs and object types. semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.
2011-03-02 08:49:38 +00:00
system-pp502x.c
Add a higher level USB detection that prevents fraudulent bus resets from causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable.
2011-01-17 12:24:41 +00:00
system-pp5002.c
system-target.h
Set the default battery capacity for ipod video properly depending on detected RAM size.
2011-07-19 20:48:16 +00:00
thread-arm.c
Changed #warning to a TODO comment.
2011-10-05 14:42:18 +00:00
thread-pp.c
Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead.
2011-02-02 17:43:32 +00:00
timer-pp.c
usb-drv-arc.c
Some iPod Video's need a 2nd call of ub_drv_init() to establish the USB connection. This workaround breaks the USB functionality for other devices. Until there is a proper fix available just use the workaround for iPod Video only. Fixes FS#12324.
2011-10-20 14:48:20 +00:00
usb-fw-pp502x.c
Remove obsolete USB_DETECT_BY_DRV define throughout.
2011-09-14 16:42:43 +00:00
usb-fw-pp5002.c
Fix r29053 red and a leftover use of 'usb' variable as a bool rather than int in main-pp.c.
2011-01-15 08:52:59 +00:00
usb-s3c6400x.c
usb-s3c6400x.c: Fix memory corruption bug (closes FS#12310)
2011-11-06 00:56:26 +00:00
usb-target.h
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
2011-01-15 08:19:30 +00:00
usb-tcc.c
wmcodec-pp.c
wmcodec-telechips.c
569285794b