Jack Halpin 56457934c6 sd-as3525v2: Add delay after SD_SWITCH_FUNC to while switching to high speed timings and wait until after this switch to bring the card clock back up to full speed. ... This seems to make switching the uSD card to high speed timing much more reliable. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25935 a1c6a512-1295-4272-9138-f99709370657		2010-05-10 17:34:54 +00:00
..
archos/av300
as3525	sd-as3525v2: Add delay after SD_SWITCH_FUNC to while switching to high speed timings and wait until after this switch to bring the card clock back up to full speed.	2010-05-10 17:34:54 +00:00
at91sam
imx31
ipod
iriver
olympus
pbell
philips
pnx0101
s3c2440
s5l8700
samsung
sandisk
tatung
tcc77x
tcc780x
tms320dm320
adc-as3514.c	Add handler for audio irq.	2010-03-23 05:02:37 +00:00
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
ata-as-arm.S
ata-nand-telechips.c
ata-pp5002.c
ata-pp5020.c
ata-sd-pp.c
ata-target.h
audio-pp.c
crt0-pp-bl.S	Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio.	2009-12-25 04:05:01 +00:00
crt0-pp.S
crt0.S
ffs-arm.S
i2c-pp.c
i2c-telechips.c
i2s-pp.c
kernel-pp.c
lcd-as-memframe.S
lcd-c200_c200v2.c	See 0x429c in OF (lcd_init), B6 is lcd reset line.	2010-05-10 16:11:01 +00:00
lcd-ssd1815.c
memcpy-arm.S
memmove-arm.S
memset-arm.S	Updated our source code header to explicitly mention that we are GPL v2 or	2008-06-28 18:10:04 +00:00
memset16-arm.S
mmu-arm.h
mmu-arm.S
mmu-armv6.S
pcm-pp.c
pcm-telechips.c
powermgmt-ascodec.c
sd-pp-target.h
support-arm.S
system-arm.c
system-arm.h
system-pp502x.c
system-pp5002.c	Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.	2009-10-19 21:38:52 +00:00
system-target.h
timer-pp.c
usb-drv-arc.c
usb-fw-pp502x.c
usb-fw-pp5002.c
usb-s3c6400x.c
usb-target.h	Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.	2009-01-22 22:05:04 +00:00
usb-tcc.c
wmcodec-pp.c
wmcodec-telechips.c