.. |
archos/av300
|
|
|
as3525
|
Add #ifdef HAVE_MULTIDRIVE to HS timings switch for uSD cards.
|
2009-10-24 16:42:24 +00:00 |
at91sam
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
imx31
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
ipod
|
Add iPod Nano 2G µsec timer, and use it in the clickwheel driver.
|
2009-10-21 18:53:41 +00:00 |
iriver
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
olympus
|
mrobe100: power off HDD (courtesy of lowlight) ~2h extra playtime
|
2009-08-14 21:11:08 +00:00 |
philips
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
pnx0101
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
s3c2440
|
Working Bootloader for mini2440.
|
2009-10-22 17:45:02 +00:00 |
s5l8700
|
Meizu M6 SP: update lcd driver, it is now possible to display a rockbox logo (with some limitations, see comments in lcd-m6sp.c)
|
2009-10-25 11:31:13 +00:00 |
samsung
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
sandisk
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
tatung
|
make ELIO_TPJ1022 bootloader compile again
|
2009-07-17 22:07:06 +00:00 |
tcc77x
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
tcc780x
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
tms320dm320
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
adc-as3514.c
|
|
|
adc-pp5020.c
|
|
|
ascodec-pp.c
|
|
|
ascodec-target.h
|
|
|
ata-as-arm.S
|
ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.
|
2009-07-11 23:43:44 +00:00 |
ata-nand-telechips.c
|
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
|
2009-10-09 20:36:09 +00:00 |
ata-pp5002.c
|
Remove some unused declarations
|
2009-05-21 12:32:26 +00:00 |
ata-pp5020.c
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
ata-sd-pp.c
|
sd_first_drive is only used when HAVE_HOTSWAP is defined, so add appropriate #ifdefs
|
2009-07-20 19:46:36 +00:00 |
ata-target.h
|
Remove some unused declarations
|
2009-05-21 12:32:26 +00:00 |
audio-pp.c
|
|
|
crt0-pp-bl.S
|
Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.
|
2009-10-19 21:38:52 +00:00 |
crt0-pp.S
|
FS#9730 by Torne Wuff - support installing Rockbox in the firmware partition in place of the main Apple firmware. This image is only loaded if no rockbox.ipod is found so does not affect current behaviour. The advantage is a small increase in boottime. This patch also adds documentation to bootloader/ipod.c in the form of a comment describing the booting behaviour.
|
2009-05-12 20:41:44 +00:00 |
crt0.S
|
FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
|
2009-06-08 23:05:33 +00:00 |
ffs-arm.S
|
|
|
i2c-pp.c
|
Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc.
|
2009-08-01 17:51:00 +00:00 |
i2c-telechips.c
|
Fix missing i2c mutex initialisation for telechips.
|
2009-06-21 13:26:32 +00:00 |
i2s-pp.c
|
Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc.
|
2009-08-01 17:51:00 +00:00 |
kernel-pp.c
|
|
|
lcd-as-memframe.S
|
Apply some ARMv6 optimisations to YUV blitting. Speeds up mpegplayer on Gigabeat S by ~2% in undithered and ~7.5% in dithered mode.
|
2009-07-15 22:14:21 +00:00 |
lcd-c200_c200v2.c
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
lcd-ssd1815.c
|
|
|
memcpy-arm.S
|
|
|
memmove-arm.S
|
|
|
memset-arm.S
|
|
|
memset16-arm.S
|
|
|
mmu-arm.h
|
ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.
|
2009-07-05 01:17:25 +00:00 |
mmu-arm.S
|
Split ARMv6 code from mmu-arm.S
|
2009-10-18 13:07:14 +00:00 |
mmu-armv6.S
|
Split ARMv6 code from mmu-arm.S
|
2009-10-18 13:07:14 +00:00 |
pcm-pp.c
|
|
|
pcm-telechips.c
|
i7: pcm-telechips fix sampling rate that was about 40000 instead of 44100
|
2009-09-20 19:53:15 +00:00 |
powermgmt-ascodec.c
|
|
|
sd-pp-target.h
|
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
|
2009-07-01 10:07:22 +00:00 |
system-arm.c
|
Revise r23225 a bit, removing the debug_printf function and implementing more generic lcd_(remote)_putsf function(s) instead and use those in more places
|
2009-10-17 18:02:48 +00:00 |
system-arm.h
|
|
|
system-pp502x.c
|
initial commit of remote support for m:robe 100 courtesy of lowlight; simulator support including small fixes for the m:robe 500
|
2009-07-26 14:26:14 +00:00 |
system-pp5002.c
|
Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.
|
2009-10-19 21:38:52 +00:00 |
system-target.h
|
Remove some unused declarations
|
2009-05-21 12:32:26 +00:00 |
timer-pp.c
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
usb-drv-arc.c
|
don't treat extremely quick transfers as errors
|
2009-08-13 18:50:43 +00:00 |
usb-fw-pp502x.c
|
make ELIO_TPJ1022 bootloader compile again
|
2009-07-17 22:07:06 +00:00 |
usb-fw-pp5002.c
|
|
|
usb-s3c6400x.c
|
Plumb an iPod Nano 2G battery leak that started spilling as soon as USB was used at least once until a reboot.
|
2009-10-24 20:31:40 +00:00 |
usb-target.h
|
|
|
usb-tcc.c
|
Add working USB HID driver, by Tomer Shalev (part of his GSoC work).
|
2009-05-16 15:30:09 +00:00 |
wmcodec-pp.c
|
|
|
wmcodec-telechips.c
|
|
|